Journal of the Korean Applied Science and Technology (한국응용과학기술학회지)

The Korean Society of Applied Science and Technology (한국응용과학기술학회)
권호 표지
DOI QR코드

DOI QR Code

Experimental equipment for high efficiency heat pump development by CFD

CFD를 통한 고효율 히트펌프 개발을 위한 실험장치

  • 김종열 (동명대학교 냉동공조공학과)
  • Received : 2020.10.13
  • Accepted : 2020.10.30
  • Published : 2020.10.31
Download PDF
⟨ Previous Next ⟩

Abstract

In order to save energy, a lot of research has been conducted to develop a high-efficiency heat pump. Research to reduce or eliminate the occurrence of frost in the outdoor unit coil is also being conducted at the same time. A constant temperature chamber was constructed that allows experimentation under the same conditions as in the natural state so that frost does not occur in the outdoor unit of the heat pump regardless of the season. In order to verify the validity of the experimental apparatus, a simulation was conducted by dividing the straight length of the duct in front of the outdoor unit in the constant temperature chamber, which is the experimental apparatus, into three conditions. As a result, it was found that a straight space must be secured 10 times the diameter of the duct.

에너지를 절감하기 위해 고효율 히트펌프를 개발하기 위한 많은 연구가 이루어지고 있으며, 실외기 코일에 발생하는 서리가 발생하는 현상을 줄이거나 없애기 위한 연구도 동시에 이루어지고 있다. 계절에 관계없이 히트펌프의 실외기에 서리가 발생하지 않는 연구를 진행할 수 있도록 자연상태와 동일한 조건에서 실험할 수 있는 항온챔버를 구축하였다. 실험장치의 타당성을 검증하기 위해 실험장치인 항온챔버 내의 실외기 앞 덕트의 직선 길이를 3가지 조건으로 나누어 시뮬레이션 하였다. 그 결과 덕트 관경의 10배 길이만큼 직선 공간을 확보해야 한다는 것을 알게 되었다.

Keywords

References

  1. J.R. Kim, "Simulation of identify the frost formation of the heat pump outdoor unit", The Korean Society of Applied Science and Technology, Vol.36 No.4, pp.1410-1419,(2019)
  2. J.R. Kim, "Analysis of flow characteristics in the experimental apparatus using a heat pump outdoor unit", 2019 Spring Conference on The Korean Society of Applied Science and Technology, p.151, (2019)
  3. J.R. Kim, "CFD of experimental apparatus for analyzing frost in heat pump outdoor unit under cold condition", The Society Of Air-Conditioning And Refrigerating Engineers Of Korea, pp.798-802, (2019).
  4. K.S. Lee, S. Jhee, "Frosting and defrosting in heat exchangers", The Society Of Air-Conditioning And Refrigerating Engineers Of Korea, pp.421-422,(1998)
  5. C.G. Lee, H.C. Suh, H.C. Noh and K.S. Park, "A Numerical Study on the Flow behavior Characteristics of Disk Type Heat Exchanger", pp.617-618, (2011)
  6. J.R. Choi, N.K.Hur and N.H. Kim, "A Numerical Study on Heat Transfer Characteristics of Inclined-Flow Heat Exchanger Element for Sensible Heat Transfer", The Society Of Air-Conditioning And Refrigerating Engineers Of Korea, pp.7-13,(2012)
  7. J.H. Park, J. Lee and B.J. Kim, "Numerical Study on the Enhancement of Heat Transfer Efficiency in the Air to Air Heat Exchanger", Proceedings of the KFMA Annual Meeting, pp. 257-258,(2013)
  8. I.S. Yu, D.H. Shin, J.H. Oh, M.K. Shin, H.J. Lee and Y.S. Ko, "Design / Construction / Operation of Experimental Apparatus for Performance Evaluation of Heat Exchanger", Transactions of the Korean Society of Mechanical Engineers-B, Vol.43, No.4, pp.313-321,(2019) https://doi.org/10.3795/KSME-B.2019.43.5.313
  9. Y.S. kwak, J.H. Jeong,"Influence of design change of heat exchanger on heat transfer performance according to heating part load", The Society Of Air-Conditioning And Refrigerating Engineers Of Korea, pp.397-400,(2018)
  10. D.S. Shin, A,H. Seung and H.W.Kim, "Analysis of Thrust According to Nozzle Shape of Heat Exchanger", The Korean Society of Propulsion Engineers, pp.483-489,(2018)
  11. M.S. Park, M.S, Kim,"A Study on the Seasonal Efficiency Estimation of an Air source heat pump according to the change of heat exchanger performance", The Society Of Air-Conditioning And Refrigerating Engineers Of Korea, pp.1-4, (2018)
  12. M.J. Kim, S.H. Park, K.N. Cho, "Experimental analysis of local frost characteristics and heat transfer rate of the fin tube heat exchanger", The Society Of Air-Conditioning And Refrigerating Engineers Of Korea, pp.203-204,(2017)
  13. C.W. Kim, Y.C. Ahn and G. T. Kim, "A Numerical Study on the Design of Exchanger for Desiccant Dehumidifier", The Korean Society for Power System Engineering, pp.54-62, (2013).
  14. C. W. Park, C. D. Kang, "Characteristics of defrosting by electric heater on fin tube heat exchanger to supplying power", The Society Of Air-Conditioning And Refrigerating Engineers Of Korea, pp.68-71,(2015)
  15. J.N, Seo, Y.I. Kim and K.S. Chung, "Dynamic Simulation of a Hybrid Cooling System utilizing Heat Pump, Desiccant and Evaporative Cooler", Transactions of the Korea society of Geothermal Energy Engineers, Vol.7, No.1, pp.45-50, (2011).
  16. N.M. Park, J.S. Shin, B.Y. Chung and B.S. Kim, "A New Dynamic VRF Heat Hump Simulation Including Frosting and Defrosting Models", Transactions of the KSME C Industrial Technology and Innovation, Vol.3, No.1, pp.1-13,(2015) https://doi.org/10.3795/KSME-C.2015.3.1.001