Geomechanics and Engineering

  • 제23권2호
  • /
  • Pages.151-163
  • /
  • 2020
  • /
  • 2005-307X(pISSN)
  • /
  • 2092-6219(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Grouting diffusion mechanism in an oblique crack in rock masses considering temporal and spatial variation of viscosity of fast-curing grouts

  • Huang, Shuling (Key Laboratory of Geotechnical Mechanics and Engineering of Ministry of Water Resources, Changjiang River Scientific Research Institute) ;
  • Pei, Qitao (Key Laboratory of Geotechnical Mechanics and Engineering of Ministry of Water Resources, Changjiang River Scientific Research Institute) ;
  • Ding, Xiuli (Key Laboratory of Geotechnical Mechanics and Engineering of Ministry of Water Resources, Changjiang River Scientific Research Institute) ;
  • Zhang, Yuting (Key Laboratory of Geotechnical Mechanics and Engineering of Ministry of Water Resources, Changjiang River Scientific Research Institute) ;
  • Liu, Dengxue (Key Laboratory of Geotechnical Mechanics and Engineering of Ministry of Water Resources, Changjiang River Scientific Research Institute) ;
  • He, Jun (Key Laboratory of Geotechnical Mechanics and Engineering of Ministry of Water Resources, Changjiang River Scientific Research Institute) ;
  • Bian, Kang (State Key Laboratory of Geomechanics and Geotechnical Engineering, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences)
  • 투고 : 2020.03.23
  • 심사 : 2020.09.28
  • 발행 : 2020.10.25
⟨ 이전 논문 다음 논문 ⟩

초록

Grouting method is an effective way of reinforcing cracked rock masses and plugging water gushing. Current grouting diffusion models are generally developed for horizontal cracks, which is contradictory to the fact that the crack generally occurs in rock masses with irregular spatial distribution characteristics in real underground environments. To solve this problem, this study selected a cement-sodium silicate slurry (C-S slurry) generally used in engineering as a fast-curing grouting material and regarded the C-S slurry as a Bingham fluid with time-varying viscosity for analysis. Based on the theory of fluid mechanics, and by simultaneously considering the deadweight of slurry and characteristics of non-uniform spatial distribution of viscosity of fast-curing grouts, a theoretical model of slurry diffusion in an oblique crack in rock masses at constant grouting rate was established. Moreover, the viscosity and pressure distribution equations in the slurry diffusion zone were deduced, thus quantifying the relationship between grouting pressure, grouting time, and slurry diffusion distance. On this basis, by using a 3-d finite element program in multi-field coupled software Comsol, the numerical simulation results were compared with theoretical calculation values, further verifying the effectiveness of the theoretical model. In addition, through the analysis of two engineering case studies, the theoretical calculations and measured slurry diffusion radius were compared, to evaluate the application effects of the model in engineering practice. Finally, by using the established theoretical model, the influence of cracking in rock masses on the diffusion characteristics of slurry was analysed. The results demonstrate that the inclination angle of the crack in rock masses and azimuth angle of slurry diffusion affect slurry diffusion characteristics. More attention should be paid to the actual grouting process. The results can provide references for determining grouting parameters of fast-curing grouts in engineering practice.

키워드

과제정보

The work was supported by the National Science Foundation of China (Nos. 51539002, 51979008, 51779018, 51809014) and the Basic Research Fund for Central Research Institutes of Public Causes (Nos. CKSF2019434/YT, CKSF2019169/YT).

참고문헌

  1. Anderson, J.D. and Wendt, J. (1995), Computational Fluid Dynamics, McGraw-Hill Education, New York, U.S.A.
  2. Andjelkovic, V., Lazarevic, Z., Nedovic, V. and Stojanovic, Z. (2013), "Application of the pressure grouting in the hydraulic tunnels", Tunn. Undergr. Sp. Tech., 37, 165-179. http://doi.org/10.1016/j.tust.2012.08.012.
  3. Bezuijen, A., Te Grotenhuis, R., Van Tol, A.F., Bosch, J.W. and Haasnoot, J.K. (2011), "Analytical model for fracture grouting in sand", J. Geotech. Geoenviron. Eng., 137(6), 611-620. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000465.
  4. Bouchelaghem, F. (2009), "Multi-scale modelling of the permeability evolution of fine sands during cement suspension grouting with filtration", Comput. Geotech., 36(6), 1058-1071. http://doi.org/10.1016/j.compgeo.2009.03.016.
  5. Celik, F. (2019), "The observation of permeation grouting method as soil improvement technique with different grout flow models", Geomech. Eng., 17(4), 367-374. http://doi.org/10.12989/gae.2019.17.4.367.
  6. Celik, F. and Canakci, H. (2015), "An investigation of rheological properties of cement-based grout mixed with rice husk ash (RHA)", Constr. Build. Mater., 91, 187-194. http://doi.org/10.1016/j.conbuildmat.2015.05.025.
  7. Chen, T.L., Zhang, L.Y. and Zhang, D.L. (2014), "An FEM/VOF hybrid formulation for fracture grouting modelling", Comput. Geotech., 58, 14-27. http://doi.org/10.12989/10.1016/j.compgeo.2014.02.002.
  8. Cheng, H., Chen, J., Chen, R., Huang, J. and Li, J. (2019), "Threedimensional analysis of tunnel face stability in spatially variable soils", Comput. Geotech., 111, 76-88. http://doi.org/10.1016/j.compgeo.2019.03.005.
  9. Dahlo, T.S. and Nilsen, B. (1994), "Stability and rock cover of hard rock subsea tunnels", Tunn. Undergr. Sp. Tech., 9(2), 151-158. http://doi.org/10.1016/0886-7798(94)90026-4.
  10. Devi, K., Saini, B. and Aggarwal, P. (2019), "Utilization of Kota stone slurry powder and accelerators in concrete", Comput. Concrete, 23 (3), 189-201. http://doi.org/10.12989/cac.2019.23.3.189.
  11. Frank, M.W. (2015), Fluid Mechanics, McGraw-Hill Education, New York, U.S.A.
  12. Fransson, A., Tsang, C.F., Rutqvist, J. and Gustafson, G. (2007), "A new parameter to assess hydromechanical effects in singlehole hydraulic testing and grouting", Int. J. Rock Mech. Min. Sci., 44(7), 1011-1021. http://doi.org/10.1016/j.ijrmms.2007.02.007.
  13. Funehag, J. and Gustafson, G. (2008), "Design of grouting with silica sol in hard rock-New methods for calculation of penetration length, Part I", Tunn. Undergr. Sp. Tech., 23(1), 1-8. http://doi.org/10.1016/j.tust.2006.12.005
  14. GB175-2007 (2008), National Standard for Common Portland Cement, General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standards Press of China, Beijing, China.
  15. Kim, J.S., Lee, I.M., Jang, J.H. and Choi, H. (2009), "Groutability of cement-based grout with consideration of viscosity and filtration phenomenon", Int. J. Numer. Anal. Meth. Geomech., 33(16), 1771-1797. http://doi.org/10.1002/nag.785.
  16. Lisa, H., Christian, B., Asa, F., Gunnar, G. and Johan, F. (2012), "A hard rock tunnel case study: Characterization of the waterbearing fracture system for tunnel grouting", Tunn. Undergr. Sp. Tech., 30, 132-144. http://doi.org/10.1016/j.tust.2012.02.014.
  17. Lombardi, G. (1985), "The role of cohesion in cement grouting of rock", Proceedings of the 15th International Congress of Large Dams, Lausanne, Switzerland, June.
  18. Miller, E.A. and Roycroft, G.A. (2004), "Compaction grouting test program for liquefaction control", J. Geotech. Geoenviron. Eng., 130(4), 355-361. https://doi.org/10.1061/(ASCE)1090-0241(2004)130:4(355).
  19. Mirza, J., Saleh, K., Langevin, M.A., Mirza, S., Bhutta, M.A.R. and Tahir, M.M. (2013), "Properties of microfine cement grouts at $4^{\circ}C$, $10^{\circ}C$ and $20^{\circ}C$", Constr. Build. Mater., 47, 1145-1153. http://doi.org /10.1016/j.conbuildmat.2013.05.026.
  20. Ruan, W.J. (2005), "Spreading model of grouting in rock mass fissures based on time-dependent behavior of viscosity of cement-based grouts", Chin. J. Rock Mech. Eng., 24(15), 2709-2714. https://doi.org/10.3321/j.issn:1000-6915.2005.15.018.
  21. Seo, H.J., Choi, H. and Lee, I.M. (2016), "Numerical and experimental investigation of pillar reinforcement with pressurized grouting and pre-stress", Tunn. Undergr. Sp. Tech., 54, 135-144. https://doi.org/10.1016/j.tust.2015.10.018.
  22. Sha, F., Li, S., Liu, R., Li, Z. and Zhang, Q. (2018), "Experimental study on performance of cement-based grouts admixed with fly ash, bentonite, superplasticizer and water glass", Constr. Build. Mater, 161, 282-291. https://doi.org/10.1016/j.conbuildmat.2017.11.034.
  23. Te Grotenhuis, R. (2004), "Fracture grouting in theory: Modelling of fracture grouting in sand", Ph.D. Dissertation, Delft University of Technology, Delft, The Netherelands.
  24. Wang, Y. and Su, B.Y. (2002), "Research on the behavior of fluid flow in a single fracture and its equivalent hydraulic aperture", Adv. Water Sci., 13(1), 61-68. https://doi.org/10.1002/mop.10502.
  25. Wittke, W. (1991), "The application of grouting with dense cement paste", Proceedings of the Collection of Translations of Modern Grouting Techniques. Beijing, China, January.
  26. Yoon, J. and El Mohtar, C.S. (2015), "A filtration model for evaluating maximum penetration distance of bentonite grout through granular soils", Comput. Geotech., 65, 291-301. https://doi.org/10.1016/j.compgeo.2015.01.004.
  27. Zhang, Q.S., Zhang, L.Z., Liu, R.T., Li, S.C. and Zhang, Q.Q. (2017), "Grouting mechanism of quick setting slurry in rock fissure with consideration of viscosity variation with space", Tunn. Undergr. Sp. Tech., 70, 262-273. https://doi.org/10.1016/j.tust.2017.08.016.
  28. Zhang, Q.S., Zhang, L.Z., Zhang, X, Liu, R.T., Zhu, M.X. and Zheng, D.Z. (2015), "Grouting diffusion in a horizontal crack considering temporal and spatial variation of viscosity", Chin. J. Rock Mech. Eng., 34(6), 122-134. https://doi.org/10.13722/j.cnki.jrme.2014.0958.
  29. Zhong, D.H., Yan, F.G., Li, M.C., Huang, C.X., Fan, K. and Tang, J.F. (2015), "A real-time analysis and feedback system for quality control of dam foundation grouting engineering", Rock Mech. Rock Eng., 48(5), 1947-1968. https://doi.org/10.1007/s00603-014-0686-6.
  30. Zhou, F., Sun, W., Shao, J., Kong, L. and Geng, X. (2020), "Experimental study on nano silica modified cement base grouting reinforcement materials", Geomech. Eng., 20(1), 67-73. https://doi.org/10.12989/gae.2020.20.1.067.
  31. Zhou, Y., Wang, G.H. and Chang, Y.H. (2019), "Comparison of the effect of lithium bentonite and sodium bentonite on the engineering properties of bentonite-cement-sodium silicate grout", Adv. Concrete Construct., 9(3), 279-287. https://doi.org/10.12989/acc.2020.9.3.279.