참고문헌
- 민경조, 오세욱, 전석원, 조상호, 2017, 변형률 게이지 측정원리를 이용한 충격 하중 센서의 개발 및 암석의 동적 압열 인장 실험에 적용, 대한화약발파공학회지, Vol.35, No.3, pp. 15-20.
- Asprone, D., E. Cadoni, A. Prota and G. Manfredi, 2009, Dynamic behavior of a Mediterranean natural stone under tensile loading, Int. J. Rock Mech. Min. Sci., Vol. 46, No. 3, pp. 514-520. https://doi.org/10.1016/j.ijrmms.2008.09.010
- Cho S.H., Y. Ogata and K. Kaneko, 2003, Strain-rate dependency of the dynamic tensile strength of rock, Int. J. Rock Mech. Min. Sci., Vol. 40, pp. 763-777. https://doi.org/10.1016/S1365-1609(03)00072-8
- Cho, S.H., B. Mohanty, Y. Nakamura, Y. Ogata, H. Kitayama and K. Kaneko, 2007, Fracture Processes of Rocks In Dynamic Tensile-splitting Test, Proc. 1st Canada-U.S. Rock Mechanics Symp., Vancouver, Canada, pp. 639-645.
- Cho S.H., H.M. Kang, M.S. Kim, H. Eustache, M. Kataoka, Y. Obara, and K. Xia, 2014, Determination of Dynamic Fracture Toughness of Rocks using Straight Notched Disk Bending (SNDB) specimen, Proc. 8th Asian Rock Mechanics Symp., Sapporo, pp. 302.
- Dai F., S. Huang, and K. Xia. 2010, Some fundamental issues in dynamic compression and tension tests of rocks using split Hopkinson pressure bar, Rock Mech. Rock Eng., Vol. 43, pp. 657-666. https://doi.org/10.1007/s00603-010-0091-8
- Dai F., K. Xia., H. Zheng and X.Y. Wang, 2011, Determination of dynamic rock Mode-I fracture parameters using cracked chevron notched semi-circular bend specimen, Eng. Frac. Mech., Vol. 78, pp. 2633-2644. https://doi.org/10.1016/j.engfracmech.2011.06.022
- Dai F. and K. Xia, 2013, Laboratory measurements of the rate dependence of the fracture toughness anisotropy of Barre granite, Int. J. Rock Mech. Min. Sci., Vol. 60, pp. 57-65. https://doi.org/10.1016/j.ijrmms.2012.12.035
- ISRM, 2015, The ISRM suggested methods for rock characterization, testing and monitoring: 2007-2014, Switzerland AG, Springer.
- Kipp M.E., D.E. Grady and F.P. Chen, 1980, Strain-rate dependent fracture initiation, Int. J. Frac., Vol. 16, No. 5, pp. 471-478. https://doi.org/10.1007/BF00016585
- Kolsky, H., 1949, An investigation of mechanical properties of materials at very high rates of loading, Proc. Physics Society of London, Series B62, pp. 676-700. https://doi.org/10.1088/0370-1301/62/11/302
- Kumar A., T.S.M. Lok and P. Zhao, 2004, DESIGN OF AN IMPACT STRIKER FOR A SPLIT HOPKINSON PRESSURE BAR, Journal of The Institution of Engineers, Singapore, Vol. 44 Issue 1, pp. 119-130.
- Li X., Z. Zhou, T.S. Lok, L. Hong and T. Yin, 2008. Innovative testing technique of rock subjected to coupled static and dynamic loads, Int. J. Rock Mech. Min. Sci., Vol. 45, No. 5, pp. 739-748. https://doi.org/10.1016/j.ijrmms.2007.08.013
- Lindholm U.S., 1971, High strain rate tests, techniques of metals research, measurement of mechanical properties, Wiley Interscience, New York.
- Liu, K. and Q. Zhang, 2019, Dynamic Behaviors of Sandstone under True Triaxial Confinements: Triaxial Hopkinson Bar Tests, Proc. 53rd Americal Rock Mechanics/Geomechanics Symp., New York.
- Min G.J., S.W. Oh, M.S. Kim, J.J. Yoon, S.H. Cho and L.J. Park, 2016, Determination of the dynamic shear strength of granite under confined pressure, Proc. 2nd International Conference on Rock Dynamics and Applications, Suzhou.
- Nasser N., 2000, Mechanical Testing and Evaluation, ASM handbook, ASM International, Vol. 8, pp.427-428.
- Oh S.W., G.J. Min, S.W. Park, M.S. Kim, Y. Obara and S.H. Cho, 2019, Anisotropic influence of fracture toughness on loading rate dependency for granitic rocks, Eng. Frac. Mech., 221, 106677. https://doi.org/10.1016/j.engfracmech.2019.106677
- Ramesh K.T., 2008, High rates and impact experiments. Springer handbook of experimental solid mechanics. Springer, US, pp 929-960.
- Reddish, D. J., L.R. Stace, P. Vanichkobchinda, and D.N. Whittles, 2005, Numerical simulation of the dynamic impact breakage testing of rock, Int. J. Rock Mech. Min. Sci., Vol. 42, No. 2, pp. 167-176. https://doi.org/10.1016/j.ijrmms.2004.06.004
- Rinehardt J.S., 1965, Dynamic fracture strength of rocks. Proc. 7th Symposium on Rock Mechanics, Pennsylvania, pp. 205-208.
- Whittles, D. N., S. Kingman, I. Lowndes, and K. Jackson, 2006, Laboratory and numerical investigation into the characteristics of rock fragmentation, Minerals Engineering, Vol. 19, No. 14, pp. 1418-1429. https://doi.org/10.1016/j.mineng.2006.02.004
- Xia, K., M.H.B. Nasseri, B. Mohanty, F. Lu, R. Chen and S.N. Luo, 2008, Effects of microstructures on dynamic compression of Barre granite, Int. J. Rock Mech. Min. Sci., Vol. 45, No. 6, pp. 879-887. https://doi.org/10.1016/j.ijrmms.2007.09.013
- Xia. K, and W. Yao, 2015, Dynamic rock tests using split Hopkinson (Kolsky)bar system - A review, Journal of Rock Mechanics and Geotechnical Engineering, Vol. 7, pp. 27-59. https://doi.org/10.1016/j.jrmge.2014.07.008
- Yan, D. and G. Lin, 2006, Dynamic properties of concrete in direct tension, Cement and Concrete Research Vol. 36, No.7, pp. 1371-1378. https://doi.org/10.1016/j.cemconres.2006.03.003
- Zhao, J., H.B. Li, M.B. Wu and T.J. Li, 1999, Dynamic uniaxial compression tests on a granite, Int. J. Rock Mech. Min. Sci., Vol. 36, No. 2, pp. 273-277. https://doi.org/10.1016/S0148-9062(99)00008-X
- Zhang, Q.B., and J. Zhao, 2013, Effect of loading rate on fracture toughness and failure micromechanisms in marble, Eng. Frac. Mech., 102, pp. 288-309. https://doi.org/10.1016/j.engfracmech.2013.02.009
- Zhang, Q.B and J. Zhao, 2014, A Review of Dynamic Experimental Techniques and Mechanical Behaviour of Rock Materials, Rock Mech. Rock Eng., Vol. 47, pp. 1411-1478. https://doi.org/10.1007/s00603-013-0463-y
- Zhou Y.X., K. Xia, X.B. Li, H.B. Li, G.W. Ma, J. Zhao, Z. Zhou and F. Dai, 2012, Suggested methods for determining the dynamic strength parameters and Mode I fracture toughness of rock materials, Int. J. Rock Mech. Min. Sci., Vol. 49, pp. 105-112. https://doi.org/10.1016/j.ijrmms.2011.10.004