Advances in concrete construction

  • 제10권3호
  • /
  • Pages.211-220
  • /
  • 2020
  • /
  • 2287-5301(pISSN)
  • /
  • 2287-531X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Influence of binder, aggregate and compaction techniques on the properties of single-sized pervious concrete

  • Juradin, Sandra (Faculty of Civil Engineering, Architecture and Geodesy, University of Split) ;
  • Ostojic-Skomrlj, Nives (Faculty of Civil Engineering, Architecture and Geodesy, University of Split) ;
  • Brnas, Ivan (Faculty of Civil Engineering, Architecture and Geodesy, University of Split) ;
  • Prolic, Marina (Faculty of Civil Engineering, Architecture and Geodesy, University of Split)
  • 투고 : 2019.05.25
  • 심사 : 2020.08.13
  • 발행 : 2020.09.25
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, 18 single-sized pervious concrete mixtures were tested. The mixtures were prepared by altering: the amount and type of binder, type of aggregate, and the method of compaction. Concrete was compacted in layers in one of five different consolidation techniques: with standard tamping rod, wooden lath, concrete cylinder, or vibration of 12 and 40 s. Tests carried out on the specimens were: slump, density, porosity, coefficients of permeability, compressive strength and splitting strength. The relationships between porosity-density and porosity-strength were established. Two mixtures were selected for the preparation of test slabs on different subgrades and their permeability was tested according to ASTM C 1701-09 Standard. By comparing laboratory and field tests of permeability, it was concluded that the subgrade affects the test results. Measurements on the test slabs were repeated after 1 and 2 years of installation.

키워드

참고문헌

  1. ACI 330R-08 (2008), Guide for the Design and Construction of Concrete Parking Lots, American Concrete Institute, Farmington Hills, MI, USA.
  2. ACI 522R-10 (2010), Report on Pervious Concrete, American Concrete Institute, Farmington Hills, MI, USA.
  3. Aliabdo, A.A., Abd Elmoaty, A.E.M. and Fawzy, A.M. (2018), "Experimental investigation on permeability indices and strength of modified pervious concrete with recycled concrete aggregate", Constr. Build. Mater., 193, 105-127. https://doi.org/10.1016/j.conbuildmat.2018.10.182.
  4. Anderson, I.A., Suozzo, M. and Dewoolkar, M.M. (2013), Laboratory and Field Evaluations of Pervious Concrete, College of Engineering and Mathematical Sciences, Burlington.
  5. Andrew, I. and Bradley, J.P. (2010), "Effect of aggregate size and gradation on pervious concrete mixtures", ACI Mater. J., 107(6), 625-631.
  6. ASTM C 1701-09 (2009), Standard Test Method for Infiltration Rate of In-Place Pervious Concrete, ASTM International, West Conshohocken, PA
  7. ASTM D2434-68 (2006), Standard Test Method for Permeability of Granular Soils (Constant Head), ASTM International, West Conshohocken, PA.
  8. Bhutta, M.A.R., Tsuruta, K. and Mirza, J. (2012), "Evaluation of high-performance porous concrete properties", Constr. Build. Mater., 31, 67-73. https://doi.org/10.1016/j.conbuildmat.2011.12.024.
  9. Brnas, I. and Juradin, S. (2016), "The impact of composition and placement method on the properties of porous concrete", Congress of Croatian Builders-EU and Croatian Construction Industry, Cavtat, Hrvatska. (in Croatian)
  10. Chindaprasirt, P., Hatanaka, S., Chareerat, T., Mishima, N. and Yuasa, Y. (2008), "Cement paste characteristics and porous concrete properties", Constr. Build. Mater., 22(5), 894-901. https://doi.org/10.1016/j.conbuildmat.2006.12.007.
  11. Chindaprasirt, P., Hatanaka, S., Mishima, M., Yuasa, Y. and Chareerat, T. (2009), "Effect of binder strength and aggregate size on the compressive strength and voids ratio of porous concrete", Int. J. Miner. Metal. Mater., 16(6), 714-719. https://doi.org/10.1016/S1674-4799(10)60018-0.
  12. Cosic, K., Korat, L., Ducman, V. and Netinger, I. (2015), "Influence of aggregate type and size on properties of pervious concrete", Constr. Build. Mater., 78, 69-79. https://doi.org/10.1016/j.conbuildmat.2014.12.073.
  13. Croush, L.K., Pitt, J. and Hewitt, R. (2007), "Aggregate effects on pervious portland cement concrete static modulus of elasticity", J. Mater. Civil Eng., ASCE, 19(7), 561-568. https://doi.org/10.1061/(ASCE)0899-1561(2007)19:7(561).
  14. Deo, O., Sumanasooriya, M. and Neithalath, N. (2010), "Permeability reduction in pervious concretes due to clogging: Experiments and modeling", J. Mater. Civil Eng., 22(7), 741-751. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000079.
  15. Dong, Q., Wu, H., Huang, B., Shu, X. and Wang, K. (2012), "Investigation into laboratory abrasion test methods for pervious concrete", J. Mater. Civil Eng., 25(7), 886-892. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000683.
  16. Dong, X. and Gao, J. (2011), "Effects of fiber type and fiber volume content on frost resistance of fiber-reinforced concrete in airport pavement", Proceeding of Third International Conference on Transportation Engineering, ASCE, Reston, VA.
  17. Drake, J.A.P. and Bradford, A. (2013), "Assessing the potential for restoration of surface permeability for permeable pavements through maintenance", Water Sci. Technol., 68(9), 1950-1958. https://doi.org/10.2166/wst.2013.450.
  18. Fu, T.C., Yeih, W., Chang, J.J. and Huang, R. (2014), "The influence of aggregate size and binder material on properties of pervious concrete", Adv. Mater. Sci. Eng., 2014, Article ID 963971, 17. https://doi.org/10.1155/2014/963971.
  19. Ghafoori, N. and Dutta, S. (1995), "Building and non-pavement applications of no-fines concrete", J. Mater. Civil Eng., 7(4), 286-289. https://doi.org/10.1061/(ASCE)0899-1561(1995)7:4(286).
  20. Gunderson, J. (2008), Pervious Pavements: New Findings About Their Functionality and Performance in Cold Climates, Stormwater Magazine, September.
  21. Haselbach, L.M., Valavala, S. and Montes, F. (2006), "Permeability predictions for sand-clogged Portland cement pervious concrete pavement systems", J. Environ. Manage., 81(1), 42-49. https://doi.org/10.1016/j.jenvman.2005.09.019.
  22. Hein, M.F., Dougherty, M. and Hobbs, T. (2013), "Cleaning Methods for Pervious Concrete Pavements", Int. J. Constr. Edu. Res., 9(2), 102-116. https://doi.org/10.1080/15578771.2011.649886.
  23. Henderson, V. and Tighe, S. (2012), "Evaluation of pervious concrete pavement performance in cold weather climates", Int. J. Pave. Eng., 13, 197-208. https://doi:10.1080/10298436.2011.572970.
  24. HRN EN 12350-2:2009 Testing Fresh Concrete-Slump Test, Croatian Standard Institute, Zagreb, Croatia.
  25. HRN EN 12390-2:2009 Testing Hardened Concrete-Part 2: Making and Curing Specimens for Strength Tests, Croatian Standard Institute, Zagreb, Croatia.
  26. HRN EN 12390-3:2009 Testing Hardened Concrete-Part 3: Compressive Strength of Test, Croatian Standard Institute, Zagreb, Croatia.
  27. HRN EN 12390-5:2009 Testing Hardened Concrete-Part 5: Flexural Strength of Test Specimens, Croatian Standard Institute, Zagreb, Croatia.
  28. HRN EN 12390-6:2009 Testing Hardened Concrete-Part 6: Tensile Splitting Strength of Test Specimens, Croatian Standard Institute, Zagreb, Croatia.
  29. Huang, B., Mohammad, L., Raghavendra, A. and Abadie, C. (1999), "Fundamentals of permeability in asphalt mixtures", J. Associ. Asphalt Pav. Technol., 68, 479-500.
  30. Huang, B., Wu, H., Shu, X. and Burdette, E.G. (2010), "Laboratory evaluation of permeability and strength of polymer-modified pervious concrete", Constr. Build. Mater., 24(5), 818-823. https://doi.org/10.1016/j.conbuildmat.2009.10.025.
  31. Ibrahim, A., Mahmoud, E., Yamin, M. and Patibandla, V.C. (2014), "Experimentally study on Portland cement pervious concrete mechanical and hydrological properties", Constr. Build. Mater., 50, 524-529. https://doi.org/10.1016/j.conbuildmat.2013.09.022.
  32. Joshaghani, A., Ramezanianpour, A.A., Ataei, O. and Golroo, A. (2015), "Optimizing pervious concrete pavement mixture design by using the Taguchi method", Constr. Build. Mater., 101, 317-325. https://doi.org/10.1016/j.conbuildmat.2015.10.094.
  33. Kabagire, K.D. and Yahia, A. (2016), "Modeling the properties of pervious concrete using a full-factorial design", Road Mater. Pave. Des., 19(1), 1-17. https://doi.org/10.1080/14680629.2016.1207557.
  34. Kevern, J.T., Biddle, D. and Cao, Q. (2015), "Effects of macrosynthetic fibers on pervious concrete properties", J. Mater. Civil Eng., 27(9), 06014031-1-06014031-6. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001213.
  35. Kevern, J.T., Schaefer, V.R. and Wang, K. (2009), "Evaluation of pervious concrete workability using gyratory compaction", J. Mater. Civil Eng., 21(12), 764-770. https://doi.org/10.1061/(ASCE)0899-1561(2009)21:12(764).
  36. Kia, A., Wong, H.S. and Cheeseman, C.R. (2017), "Clogging in permeable concrete: A review", J. Environ. Manage., 193, 221-233. https://doi.org/10.1016/j.jenvman.2017.02.018.
  37. Krstulovic, P. (2000), "Properties and technology of concrete", Faculty of Civil Engineering, University of Split, Institut IGH, Split, 346. (in Croatian)
  38. Lian, C. and Zhuge Y. (2010), "Optimum mix design of enhanced permeable concrete-An experimental investigation", Constr. Build. Mater., 24, 2664-2671. https://doi.org/10.1016/j.conbuildmat.2010.04.057.
  39. Lian, C., Zhuge, Y. and Beecham, S. (2011), "The relationship between porosity and strength for porous concrete", Constr. Build. Mater., 25(11), 4294-4298. https://doi.org/10.1016/j.conbuildmat.2011.05.005.
  40. Maguesvari, M.U. and Narasimha, V.L. (2013), "Studies on characterization of pervious concrete for pavement applications", 2nd Conference of Transportation Research Group of India (2nd CTRG) Procedia - Social and Behavioral Sciences, 104, 198-207. http://dx.doi.org/10.1016/j.sbspro.2013.11.112.
  41. Mahalingam, R. and Mahalingam, S.V. (2016), "Analysis of pervious concrete properties", Gradevinar, 68(6), 493-501. https://doi.org/10.14256/JCE.1434.2015.
  42. Mahboub, K.C., Canler, J., Rathbone, R., Robl, T. and Davis, B. (2009), "Pervious concrete: compaction and aggregate gradation", ACI Mater. J., 106, 523-528.
  43. Netinger Grubesa, I., Barisic, I., Ducman, V. and Korat, L. (2018), "Draining capability of single-sized pervious concrete", Constr. Build. Mater., 169, 252-260. https://doi:10.1016/j.conbuildmat.2018.03.037.
  44. Putman, B.J. and Neptune, A.I. (2011), "Comparison of test specimen preparation techniques for pervious concrete pavements", Constr. Build. Mater., 25(8), 3480-3485. http://dx.doi.org/10.1016/j.conbuildmat.2011.03.039.
  45. Ravi Teja, G. and Sai Ranga Rao, M.L. (2017), "Partial replacement of cement by fly ash in porous concrete", Int. J. Civil Eng. Technol., 8(4), 1099-1103.
  46. Rehder, B., Banh, K. and Neinthalatah, N. (2014), "Fracture behaviour of pervious concretes: the effects of pore structure and fibers", Eng. Fract. Mech., 118, 1-16. https://doi.org/10.1016/j.engfracmech.2014.01.015.
  47. Rizvi, R., Tighe, S.L., Henderson, V. and Norris, J. (2009), "Laboratory sample preparation techniques for pervious concrete", Transportation Research Record Journal of the Transportation Research Board 09-1962, 16.
  48. Sandoval, G.F.B., Galobardesb, I., Teixeiraa, R.S. and Torallesa, B.M. (2017), "Comparison between the falling head and the constant head permeability tests to assess the permeability coefficient of sustainable Pervious Concretes", Case Stud. Constr. Mater., 7, 317-328. http://dx.doi.org/10.1016/j.cscm.2017.09.001.
  49. Sata, V., Ngohpok, C. and Chindaprasirt, P. (2016), "Properties of pervious concrete containing high-calcium fly ash", Comput. Concrete, 17(3), 337-351. http://dx.doi.org/10.12989/cac.2016.17.3.337.
  50. Schaefer, V.R, Wang, K., Suleiman, M.T. and Kevern, J. (2006), "Mix design development for pervious concrete in cold climates", Technical Report National Concrete Pavement Technology Center, Iowa, USA.
  51. Shoenberger, J.E. and Tom, J.G. (1992), "Polypropylene fibers in Portland cement concrete pavements", Final Report, Department of the Army, Waterways Experiment Station, Corps of Engineers, Vicksburg, Mississippi.
  52. Shu, X., Huang, B., Wu, H., Dong, Q. and Burdette, E.G. (2011), "Performance comparison of laboratory and field produced pervious concrete mixtures", Constr. Build. Mater., 25(8), 3187-3192. https://doi.org/10.1016/j.conbuildmat.2011.03.002.
  53. Sonebi, M. and Bassuoni, M.T. (2013), "Investigating the effect of mixture design parameters on pervious concrete by statistical modelling", Constr. Build. Mater., 38, 147-154. http://dx.doi.org/10.1016/j.conbuildmat.2012.07.044.
  54. Sonebi, M., Bassuonib, M. and Yahiac, A. (2016), "Pervious concrete: Mix design, properties and applications", RILEM Techn. Let., 1, 109-115, http://dx.doi.org/10.21809/rilemtechlett.2016.24.
  55. Tennis, P.D., Leming, M.L. and Akers, D.J. (2004), "Pervious concrete pavements", EB302.02, Portland Cement Association, Skokie, Illinois, and National Ready Mixed Concrete Association, SAD.
  56. Tho-in, T., Sata, V., Chindaprasirt, P. and Jaturapitakkul, C. (2012), "Pervious high-calcium fly ash geopolymer concrete", Constr. Build. Mater., 30, 366-371. https://doi.org/10.1016/j.conbuildmat.2011.12.028.
  57. Toghroli, A., Shariati, M., Sajedi, F., Ibrahim, Z., Koting, S., Mohamad, E.T. and Khorami, M. (2018), "A review on pavement porous concrete using recycled waste materials", Smart Struct. Syst., 22(4), 433-440. https://doi.org/10.12989/SSS.2018.22.4.433.
  58. Wu, H., Huang, B., Shu, X. and Dong, Q. (2011), "Laboratory evaluation of abrasion resistance of portland cement pervious concrete", J. Mater. Civil Eng., 23(5), 697-702. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000210.
  59. Wu, H., Liu, Z., Sun, B. and Yin, J. (2016), "Experimental investigation on freeze-thaw durability of Portland cement pervious concrete (PCP)", Constr. Build. Mater., 117, 63-71. https://doi.org/10.1016/j.conbuildmat.2016.04.130.
  60. Wuman, Z., Honghe, L. and Yingchen, Z. (2018), "Effect of porosity on frost resistance of Portland cement pervious concrete", Adv. Concrete Constr., 6(4), 363-373. https://doi.org/10.12989/acc.2018.6.4.363.
  61. Yang, Z., Ma, W., Shen, W. and Zhou, M. (2008), "The aggregate gradation for the pervious concrete porous road base material", Wuhan Univ. Technol.-Mater. Sci. Ed., 23, 391. https://doi.org/10.1007/s11595-007-3391-4.
  62. Zhong, R. and Wille, K. (2015), "Material design and characterization of high-performance pervious concrete", Constr. Build. Mater., 98, 51-60. https://doi.org/10.1016/j.conbuildmat.2015.08.027.
  63. Zhuge, Y. (2008), "Comparing the performance of recycled and quarry aggregate and their effect on the strength of permeable concrete", Proceeding of the 20 the Australasian Conference on the Mechanics of Structures and Materials, Australia, Toowoomba.

피인용 문헌

  1. Optimizing the mix design of pervious concrete based on properties and unit cost vol.11, pp.4, 2021, https://doi.org/10.12989/acc.2021.11.4.285
  2. Sound-absorption and NOx-removal performances of TiO2-incorporated porous concrete made with bottom ash aggregates vol.12, pp.1, 2020, https://doi.org/10.12989/acc.2021.12.1.001