Journal of the Korean Society of Propulsion Engineers (한국추진공학회지)

The Korean Society of Propulsion Engineers (한국추진공학회)
권호 표지
DOI QR코드

DOI QR Code

Study on Coating Agent Composition for Adhesion of Solid Propellant(I)

고체 추진제 접착용 코팅제 조성 연구(I)

  • Received : 2020.06.29
  • Accepted : 2020.08.25
  • Published : 2020.10.31
Download PDF
⟨ Previous Next ⟩

Abstract

The adhesion strength of two konds of solid propellants(primary propellant/secondary propellant) was studied by coating agent of adhesion composition composed of organic solvent, curing agent, and cure catalyst. The coating agent using FeAA, cure catalyst, resulted propellant breaking at more 0.14 wt% and interface breaking at less 0.10 wt%. The TPB cure catalyst of confirmed the result of the interface breaking immediately after curing of the secondary propellant. In addition, the coating agent using TPB was found to increase the adhesion strength between the primary propellant and the secondary propellant over time.

본 논문은 이종추진제(1차 추진제/2차 추진제) 접착에 필요한 코팅제에 대해 기술하였다. 코팅제는 유기용매, 고분자 경화제, 경화촉매로 구성되어 있다. 경화촉매인 FeAA를 0.14 wt% 이상 적용한 코팅제는 2차 추진제 경화 직후 시험한 결과 접착계면이 아닌 추진제가 파단되는 결과를 확인하였으며, 0.10 wt% 이하에서는 접착계면이 파단되었다. 경화촉매는 2차 추진제 경화 직후 접착계면이 파단되는 결과를 확인하였다. 또한 TPB 경화촉매를 적용한 코팅제의 경우 시간이 경과함에 따라 1차 추진제와 2차 추진제간의 접착력이 증가하는 결과를 확인하였다.

Keywords

References

  1. Jeong. J. Y. and Choi. S. H., "Propellant Characteristics used for a Rocket-Assisted Projectile with Aluminium Contents," Journal of the Korean Society of Propulsion Engineers, Vol. 23, No. 5, pp. 60~66, 2019. https://doi.org/10.6108/KSPE.2019.23.5.060
  2. Song. J. K., Lee. J. H., Choi. S. H., Suh. H., "A Study on Dual Thurst Solid Rocket Motors with High/Low Burning Rate Propellants," Journal of The Korean Society of Propulsion Engineers, KSPE Fall Conference, pp. 664~667, 2010.
  3. Jeong. J. Y., Kim. J. K., Shim. H. M., Kim. H. S., Koo. K. K., "Preparation of Cr2O3/AP Composites and their Thermal Decomposition Characteristics, "J.Appl. Chem. Eng., Vol. 26, No. 2, pp. 145~153, 2015. https://doi.org/10.14478/ace.2014.1129
  4. Jeong. J. Y., Song. J. K., Kim. Y. G., Lee. B. G., "Study on the Formulation of an Energetic Thermoplastic Propellant(I)," Journal of the Korean Society of Propulsion Engineers, Vol. 23, No. 1, pp. 71~78, 2019. https://doi.org/10.6108/KSPE.2019.23.1.071
  5. Mayamin R., Christos D., J. F. Kim, Masound B., Enrico D., Y. M. Lee, and Gyorgy S., "Exploring and Exploiting the Effect of Solvent Treatment in Membrane Separations," ACS Appl. Mater. Interfaces, Vol. 23, pp. 11279~11289, 2017.
  6. S. M. Lee., J. H. Choi., I. K. Hong., and J. W. Lee., "Curing behavior of polyurethane as a binder for polymer-bonded explosives," Journal of Industrial and Engineering Chemistry, Vol. 21, pp. 980~985, 2015.