Structural Engineering and Mechanics

  • 제75권2호
  • /
  • Pages.229-237
  • /
  • 2020
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Study of a new type of steel slit shear wall with introduced out-of-plane folding

  • He, Liusheng (State Key Laboratory of Disaster Reduction in Civil Engineering, Tongji University) ;
  • Chen, Shang (State Key Laboratory of Disaster Reduction in Civil Engineering, Tongji University) ;
  • Jiang, Huanjun (State Key Laboratory of Disaster Reduction in Civil Engineering, Tongji University)
  • 투고 : 2019.12.12
  • 심사 : 2020.02.20
  • 발행 : 2020.07.25
⟨ 이전 논문 다음 논문 ⟩

초록

The steel slit shear wall (SSSW), made by cutting vertical slits in a steel plate, is increasingly used for the seismic protection of building structures. In the domain of thin plate shear walls, the out-of-plane buckling together with the potential fracture developed at slit ends at large lateral deformation may result in degraded shear strength and energy dissipation, which is not desirable in view of seismic design. To address this issue, the present study proposed a new type of SSSW made by intentionally introducing initial out-of-plane folding into the originally flat slitted plate. Quasi-static cyclic tests on three SSSWs with different amplitudes of introduced out-of-plane folding were conducted to study their shear strength, elastic stiffness, energy dissipation capacity and buckling behavior. By introducing proper amplitude of out-of-plane folding into the SSSW fracture at slit ends was eliminated, plumper hysteretic behavior was obtained and there was nearly no strength degradation. A method to estimate the shear strength and elastic stiffness of the new SSSW was also proposed.

키워드

과제정보

The authors are grateful for the support from National Natural Science Foundation of China under Grant No. 51608388 and National Key Research and Development Program of China under Grant No. 2017YFC1500701.

참고문헌

  1. Bruneau, M., Chang S.E., Eguchi R.T., Lee, G.C., O'Rourke, T.D., Reinhorn, A.M., Shinozuka, M., Tierney, K., Wallace, W.A., and von Winterfeldt, D. (2003), "A framework to quantitatively assess and enhance the seismic resilience of communities", Earthq. Spectra, 19(4), 733-752. https://doi.org/10.1193/1.1623497.
  2. Chen, S.J., and Jhang, C. (2006), "Cyclic behavior of low yield point steel shear walls", Thin Walled Struct., 44(7), 730-738. https://doi.org/10.1016/j.tws.2006.08.002.
  3. Cortes, G. and Liu, J. (2011), "Analysis and design of steel slit panel frames (SSPFs) for seismic areas", Eng. J., AISC, 48(1), 1-17. https://doi.org/10.2307/809167
  4. Dassault Systemes (2004), ABAQUS Ver. 6.10 User's Manual. http://www.abaqus.com.
  5. He, L., Kurata, M., and Nakashima, M. (2015), "Condition assessment of steel shear walls with tapered links under various loadings", Earthq. Struct., 9(4), 767-788. https://doi.org/10.12989/eas.2015.9.4.767.
  6. He, L., Togo, T., Hayashi, K., Kurata, M., and Nakashima, M. (2016), "Cyclic Behavior of Multirow Slit Shear Walls Made from Low-Yield-Point Steel", J. Struct. Eng., 142(11), 04016094. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001569.
  7. Hitaka, T. and Matsui, C. (2003), "Experimental Study on Steel Shear Wall with Slits", J. Struct. Eng., 129(5), 586-595. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:5(586).
  8. Hitaka, T., Matsui, C. and Sakai, J. (2007), "Cyclic tests on steel and concrete-filled tube frames with Slit Walls", Earthq. Eng. Struct. Dyn., 36(6): 707-727. https://doi.org/10.1002/eqe.648.
  9. Ito, M., Taniguchi, Y., Tsuboyama, N., Hoki, K. and Nakashima, M. (2012), "Stiffening methods for enhancement of hysteretic performance of slitted steel shear walls", Proceedings of the 15th World Conference on Earthquake Engineering, Lisbon, Portugal, September.
  10. Jacobsen, A., Hitaka, T. and Nakashima, M. (2010), "Online test of building frame with slit-wall dampers capable of condition assessment", J. Constr. Steel Res., 66(11), 1320-1329. https://doi.org/10.1016/j.jcsr.2010.04.011.
  11. Jiang, H., Li, S., and He, L. (2019), "Experimental Study on a New Damper Using Combinations of Viscoelastic Material and Low-Yield-Point Steel Plates", Front. Mater., 6, 100. https://doi.org/10.3389/fmats.2019.00100.
  12. Ke, K., and Chen, Y. (2012), "Design method of steel plate shear wall with slits considering energy dissipation", Proceedings of the 15th World Conference on Earthquake Engineering, Lisbon, Portugal, September.
  13. Ke, K. and Chen, Y. (2014), "Energy-based damage-control design of steel frames with steel slit walls", Struct. Eng. Mech., Int. J., 52(6), 1157-1176. https://doi.org/10.12989/sem.2014.52.6.1157.
  14. Kurata, M., He, L., and Nakashima, M. (2015), "Steel slit shear walls with double-tapered links capable of condition assessment", Earthq. Eng. Struct. Dyn., 44(8), 1271-87. https://doi.org/10.1002/eqe.2517.
  15. Lee, J., Kang, H. and Kim, J. (2017), "Seismic performance of steel plate slit-friction hybrid dampers", J. Constr. Steel Res., 136, 128-139. https://doi.org/10.1016/j.jcsr.2017.05.005.
  16. Lin, X., Wu, K., Skalomenos, K., Lu, L., Zhao, S., (2019), "Development of a buckling-restrained shear panel damper with demountable steel-concrete composite restrainers", Soil Dyn. Earthq. Eng., 118, 221-230. https://doi.org/10.1016/j.soildyn.2018.12.015.
  17. Ma, X., Borchers, E., Pena, A., Krawinkler, H., and Deierlein G. (2010), "Design and behavior of steel shear plates with openings as energy-dissipating fuses", John A. Blume Earthquake Engineering Center, Stanford University, CA, USA.
  18. Matteis, G.D., Landolfo, R., Mazzolani, F.M. (2003), "Seismic response of MR steel frames with low-yield steel shear panels", Eng. Struct., 25(2), 155-168. https://doi.org/10.1016/S0141-0296(02)00124-4.
  19. Nakashima, M., Iwai, S., Iwata, M., Takeuchi, T., Konomi, S., Akazawa, T., and Saburi, K. (1994), "Energy dissipation behaviour of shear panels made of low yield steel", Earthq. Eng. Struct. Dyn., 23(12), 1299-1313. https://doi.org/10.1002/eqe.4290231203.
  20. Ohmori N., Toyama K., Cho T. and Takahashi T. (1966), "Studies on reinforced concrete slit walls", Summaries of Technical Papers of Annual Meeting AIJ, 41, 204 (in Japanese). https://doi.org/10.3130/aijsaxxe.41.0_204.
  21. Shi, Q., Wang, F., Wang, P., and Chen, K. (2018), "Experimental and numerical study of the seismic per-formance of an all-steel assembled Q195 low-yield buckling-restrained brace", Eng. Struct., 176, 481-499. https://doi.org/10.1016/j.engstruct.2018.09.039.
  22. Takeuchi, T., Hajjar, J.F., Matsui, R., Nishimoto, K., and Aiken, I.D. (2012), "Effect of local buckling core plate restraint in buckling restrained braces", Eng. Struct., 44, 304-311. https://doi.org/10.1016/j.engstruct.2012.05.026.
  23. Tsai, K.C., Chen, H.W., Hong, C.P., and Su, Y.F. (1993), "Design of steel triangular plate energy absorbers for seismic-resistant construction", Earthq. Spectra, 9(3), 505-528. https://doi.org/10.1193/1.1585727.
  24. Wang, B., and Zhu, S. (2017), "Seismic behavior of self-centering reinforced concrete wall enabled by supere-lastic shape memory alloy bars", Bull Earthquake Eng., 16, 479-502. https://doi.org/10.1007/s10518-017-0213-8.
  25. Zhang, C., Zhang, Z. and Shi, J. (2012), "Development of high deformation capacity low yield strength steel shear panel damper", J. Constr. Steel Res., 75, 116-130. https://doi.org/10.1016/j.jcsr.2012.03.014.

피인용 문헌

  1. Optimized stiffener detailing for shear links in eccentrically braced frames vol.39, pp.1, 2020, https://doi.org/10.12989/scs.2021.39.1.035