Structural Engineering and Mechanics

  • 제75권1호
  • /
  • Pages.59-69
  • /
  • 2020
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Hygrothermoelasticity in a porous cylinder under nonlinear coupling between heat and moisture

  • Ishihara, Masayuki (Graduate School of Engineering, Osaka Prefecture University) ;
  • Yoshida, Taku (Graduate School of Engineering, Osaka Prefecture University) ;
  • Ootao, Yoshihiro (Graduate School of Engineering, Osaka Prefecture University) ;
  • Kameo, Yoshitaka (Institute for Frontier Life and Medical Sciences, Kyoto University)
  • 투고 : 2019.03.19
  • 심사 : 2020.01.09
  • 발행 : 2020.07.10
⟨ 이전 논문 다음 논문 ⟩

초록

The purpose of this study is to develop practical tools for the mechanical design of cylindrical porous media subjected to a broad gap in a hygrothermal environment. The planar axisymmetrical and transient hygrothermoelastic field in a porous hollow cylinder that is exposed to a broad gap of temperature and dissolved moisture content and is free from mechanical constraint on all surfaces is investigated considering the nonlinear coupling between heat and binary moisture and the diffusive properties of both phases of moisture. The system of hygrothermal governing equations is derived for the cylindrical case and solved to illustrate the distributions of hygrothermal-field quantities and the effect of diffusive properties on the distributions. The distribution of the resulting stress is theoretically analyzed based on the fundamental equations for hygrothermoelasticity. The safety hazard because of the analysis disregarding the nonlinear coupling underestimating the stress is illustrated. By comparing the cylinder with an infinitesimal curvature with the straight strip, the significance to consider the existence of curvature, even if it is infinitesimally small, is demonstrated qualitatively and quantitatively. Moreover, by investigating the bending moment, the necessities to consider an actual finite curvature and to perform the transient analysis are illustrated.

키워드

참고문헌

  1. Bergman, R. (2010), "Drying and control of moisture content and dimensional changes", General Technical Report FPL-GTR-190; Forest Products Laboratory, United States Department of Agriculture Forest Service, Madison, WI, USA.
  2. Chang, W.J. (1994), "Transient hygrothermal responses in a solid cylinder by linear theory of coupled heat and moisture", Appl. Math. Modelling, 18(8), 467-473. https://doi.org/10.1016/0307-904X(94)90309-3.
  3. Chang, W.J., Chen, T.C. and Weng, C.I. (1991), "Transient hygrothermal stresses in an infinitely long annular cylinder: coupling of heat and moisture", J. Therm. Stresses, 14(4), 439-454. https://doi.org/10.1080/01495739108927078.
  4. Chang, W.J. and Weng, C.I. (1997), "An analytical solution of a transient hygrothermal problem in an axisymmetric double-layer annular cylinder by linear theory of coupled heat and moisture", Appl. Math. Modelling, 21(11), 721-734. https://doi.org/10.1016/S0307-904X(97)00100-5.
  5. Dai, T. and Dai, H.L. (2016), "Hygrothermal behavior of a CFRR-metal adhesively bonded joint with coupled transfer of heat and moisture through the thickness", Compos. Struct., 152, 947-958. https://doi.org/10.1016/j.compstruct.2016.05.097.
  6. Dai, T., Yang, Y., Dai, H.L. and Hu, Z.(2019a), "Interfacial stress analysis of a CFRR-metal adhesively bonded joint with/without defect under hygrothermal environment", Appl. Math. Modelling, 67, 357-377. https://doi.org/10.1016/j.apm.2018.10.032.
  7. Dai, T., Yang, Y., Dai, H.L., Tang, H. and Lin, Z.Y. (2019b), "Hygrothermal mechanical behaviors of a porous FG-CRC annular plate with variable thickness considering aggregation of CNTs", Compos. Struct., 215,198-213. https://doi.org/10.1016/j.compstruct.2019.02.061
  8. Dai, H.-L., Zheng, Z.Q. and Dai, T. (2017), "Investigation on a rotating FGPM circular disk under a coupled hygrothermal field", Appl. Math. Model., 46, 28-47. https://doi.org/10.1016/j.apm.2017.01.062.
  9. Glass, S.V. and Zelinka, S.L. (2010), "Moisture relations and physical properties of wood", General Technical Report FPL-GTR-190); Forest Products Laboratory, United States Department of Agriculture Forest Service, Madison, WI, USA.
  10. Hartranft, R.J. and Sih, G.C. (1980), "The influence of the Soret and Dufour effects on the diffusion of heat and moisture in solids", J. Eng. Sci., 18(12), 1375-1383. https://doi.org/10.1016/0020-7225(80)90094-4.
  11. Ishihara, M., Ootao, Y. and Kameo, Y. (2014), "Hygrothermal field considering nonlinear coupling between heat and binary moisture diffusion in porous media", J. Therm. Stresses, 37(10), 1173-1200. https://doi.org/10.1080/01495739.2014.936232.
  12. Ishihara, M., Ogasawara, K., Ootao, Y. and Kameo, Y. (2016), "One-dimensional transient hygrothermoelastic field in a porous strip considering nonlinear coupling between heat and binary moisture", J. Therm. Sci. Technol., 11(3), 16-00375. https://doi.org/10.1299/jtst.2016jtst0035.
  13. LeVeque, R.J. (2007), Finite Difference Methods for Ordinary and Partial Differential Equations: Steady-State and Time-Dependent Problems, Society for Industrial and Applied Mathematics, Philadelphia, PA.
  14. Nakao, T. (1998), "Description of moisture dependence of diffusion coefficient by moisture diffusion equation considering Coulomb friction", Holz als Roh und Werkstoff, 56(4), 266. https://doi.org/10.1007/s001070050316
  15. Noda, N., Hetnarski, R.B. and Tanigawa, Y. (2003), Thermal Stresses (2nd ed), Taylor & Francis, New York,
  16. USA. Sih, G.C., Michopoulos, J.G. and Chou, S.C. (1986), Hygrothermoelasticity, Martinus Nijhoff Publishers, Dordrecht, Netherlands.
  17. Sih, G.C. and Ogawa, A. (1982), "Transient thermal change on a solid surface: coupled diffusion of heat and moisture", J. Therm. Stresses, 5(3-4), 265-282. https://doi.org/10.1080/01495738208942150.
  18. Sih, G.C. and Shih, M.T. (1980), "Hygrothermal stress in a plate subjected to antisymmteric time-dependent moisture and temperature boundary conditions", J. Therm. Stresses, 3(3), 321-340. https://doi.org/10.1080/01495738008926972.
  19. Sih, G.C., Shih, M.T. and Chou, S.C. (1980), "Transient hygrothermal stresses in composites: coupling of moisture and heat with temperature varying diffusivity", J. Eng. Sci., 18(1), 19-42. https://doi.org/10.1016/0020-7225(80)90004-X.
  20. Sugano, Y. and Chuuman, Y. (1993), "Analytical solution of transient hygrothermoelastic problem due to coupled heat and moisture diffusion in a hollow cylinder", Transactions of the Japan Soc. Mech. Eng. Series A, 59(564), 1956-1963 (in Japanese). https://doi.org/10.1299/kikaia.59.1956
  21. Zhang, X.-Y. and Li, X.-F. (2017), "Transient response of a hygrothermoelastic cylinder based on fractional diffusion wave theory", J. Therm. Stresses, 40(12), 1575-1594. https://doi.org/10.1080/01495739.2017.1344111.