참고문헌
- ASTM C 326. Standard test method for drying and firing shrinkages of ceramic whiteware clays. 2009.
- Cho NY, Lee IB. Polymerization shrinkage, hygroscopic expansion and microleakage of resin-based temporary filling materials. Restor Dent Endod, 33, 115-124, 2008.
- Do HS, Kim DJ, Kim HJ. Application of UVcurable materials. JAIK, 4, 41-51, 2003.
- Endruweit A, Johnson MS, Long AC. Curing of composite components by ultraviolet radiation: A review. Polym compos, 27(2), 119-128, 2006. https://doi.org/10.1002/pc.20166
- Feilzer AJ, de Gee AJ, Davidson CL. Increased wall to wall curing contraction in thin bonded resin layers. J of Dent Res, 68, 48-50, 1989. https://doi.org/10.1177/00220345890680010701
- Gjelvold B, Mahmood DJH, Wennerberg A. Accuracy of surgical guides from 2 different desktop 3D printers for computed tomography-guided surgery. J Prosthet Dent, 121(3), 498-503, 2019. https://doi.org/10.1016/j.prosdent.2018.08.009
- Iga M, Takeshige F, Ui T, Torii M, Tsuchitani Y. The Relationship between polymerization shrinkage measured by a modifed dilatometer and the inorganic filler content of light-cured composites. Dent Mater, 10, 38-45, 1991. https://doi.org/10.4012/dmj.10.38
- ISO 4049. International Organization for Standardization. Dentistry-Polymerbased filling, restorative and luting materials. 2009.
- Kim DY, Kim JH, Kim HY, Kim WC. Comparison and evaluation of marginal and internal gaps in cobalt-chromium alloy copings fabricated using subtractive and additive manufacturing. J Prosthodont Res, 62, 56-64, 2017. https://doi.org/10.1016/j.jpor.2017.05.008
- Kim DY, Jeong ID, Kim JH, Kim HY, Kim WC. Reproducibility of different coping arrangements fabricated by dental microstereolithography: Evaluation of marginal and internal gaps in metal copings. J Dent Sci, 13, 220-225, 2018a. https://doi.org/10.1016/j.jds.2017.06.006
- Kim MS, Kim WG, Kang W. Evaluation of the accuracy of provisional restorative resins fabricated using dental 3D printers. J Korean Soc Dent Hyg, 19, 1089-1097, 2019.
- Kim SB, Kim NH, Kim JH, Moon HS. Evaluation of the fit of metal copings fabricated using stereolithography. J Prosthet Dent, 120(5), 693-698, 2018b. https://doi.org/10.1016/j.prosdent.2018.01.012
- Lee HY, Im YG, Kim BG, Lim HS, Kim JH. The effect of water immersion on the surface strength and the flexural strength of the acrylic resin for occlusal appliances. J Oral Med Pain, 35(1), 75-81, 2010.
- Lin WS, Harris BT, Pellerito J, Morton D. Fabrication of an interim complete removable dental prosthesis with an inoffice digital light processing threedimensional printer: a proof-of-concept technique. J Prosthet Dent, 120(3), 331-334, 2018. https://doi.org/10.1016/j.prosdent.2017.12.027
- Park JH, Choi NS. Polymerization shrinkage distribution of a dental composite during dental restoration observed by digital image correlation method. Compos Res, 30, 393-398, 2017. https://doi.org/10.7234/COMPOSRES.2017.30.6.393
- Park JS, Park MG. Effect of aging treatment on the flexural properties of polymer provisional restoration materials. Korean J Dent Mater, 40, 215-221, 2013.
- Revilla Leon M, Ozcan M. Additive manufacturing technologies used for processing polymers: current status and potential application in prosthetic dentistry. J Prosthodont, 28(2), 146-158, 2019. https://doi.org/10.1111/jopr.12801
- Shin DH, Park YM, Park SH. Correlation between UV-Dose and shrinkage amounts of postcuring process for precise fabrication of dental model using DLP 3D printer. J Korean Soc Manuf Process Eng, 17, 47-53, 2018.
- Watts DC, Cash AJ. Determination of polymerization shrinkage kinetics in visible-light-cured materials: methods development. Dent Mater, 7, 281-287, 1991. https://doi.org/10.1016/S0109-5641(05)80030-2
- Yang HS, Park SW, Lim HP, Yun KD, Park C, Lee DY. Proposal of practical digital implant treatment protocol: A case report. J Kor Dent Assoc, 57, 529-533, 2019.
피인용 문헌
- 광개시제에 따른 실험용 3D 프린팅 의치상 레진의 기계적 성질과 생체적합성 비교 vol.42, pp.4, 2020, https://doi.org/10.14347/jtd.2020.42.4.355
- 3D 프린팅용 광 중합 수지의 두께에 따른 수축 비교 vol.43, pp.1, 2021, https://doi.org/10.14347/jtd.2021.43.1.1