DOI QR코드

DOI QR Code

Deep learning-based recovery method for missing structural temperature data using LSTM network

  • Liu, Hao (School of Civil Engineering, Southeast University) ;
  • Ding, You-Liang (School of Civil Engineering, Southeast University) ;
  • Zhao, Han-Wei (School of Civil Engineering, Southeast University) ;
  • Wang, Man-Ya (School of Civil Engineering, Southeast University) ;
  • Geng, Fang-Fang (School of Architecture Engineering, Nanjing Institute of Technology)
  • 투고 : 2019.08.13
  • 심사 : 2019.11.15
  • 발행 : 2020.06.25

초록

Benefiting from the massive monitoring data collected by the Structural health monitoring (SHM) system, scholars can grasp the complex environmental effects and structural state during structure operation. However, the monitoring data is often missing due to sensor faults and other reasons. It is necessary to study the recovery method of missing monitoring data. Taking the structural temperature monitoring data of Nanjing Dashengguan Yangtze River Bridge as an example, the long short-term memory (LSTM) network-based recovery method for missing structural temperature data is proposed in this paper. Firstly, the prediction results of temperature data using LSTM network, support vector machine (SVM), and wavelet neural network (WNN) are compared to verify the accuracy advantage of LSTM network in predicting time series data (such as structural temperature). Secondly, the application of LSTM network in the recovery of missing structural temperature data is discussed in detail. The results show that: the LSTM network can effectively recover the missing structural temperature data; incorporating more intact sensor data as input will further improve the recovery effect of missing data; selecting the sensor data which has a higher correlation coefficient with the data we want to recover as the input can achieve higher accuracy.

키워드

과제정보

The authors gratefully acknowledge the support of the Distinguished Young Scientists of Jiangsu Province (Grant. BK20190013), the National Natural Science Foundation of China (Grants. 51978154 and 51608258).

참고문헌

  1. Atha, D.J. and Jahanshahi, M.R. (2018), "Evaluation of deep learning approaches based on convolutional neural networks for corrosion detection", Struct. Health Monit., 17(5), 1110-1128. https://doi.org/10.1177/1475921717737051.
  2. Bao, Y., Shi, Z., Wang, X. and Li, H. (2018), "Compressive sensing of wireless sensors based on group sparse optimization for structural health monitoring", Struct. Health Monit., 17(4), 823-836. https://doi.org/10.1177/1475921717721457.
  3. Bao, Y., Tang, Z., Li, H. and Zhang, Y. (2019). "Computer vision and deep learning-based data anomaly detection method for structural health monitoring", Struct. Health Monit., 18(2), 401-421. https://doi.org/10.1177/1475921718757405.
  4. Bengio, Y., Simard, P. and Frasconi, P. (1994), "Learning long-term dependencies with gradient descent is difficult", IEEE T. Neural Networ., 5(2), 157-166. https://doi.org/10.1109/72.279181.
  5. Cha, Y.J., Choi, W. and Buyukozturk, O. (2017), "Deep learning‐based crack damage detection using convolutional neural networks", Comput.‐Aided Civil Infrastruct. Eng., 32(5), 361-378. https://doi.org/10.1111/mice.12263
  6. Chen, Z., Bao, Y., Li, H. and Spencer, B.F. (2019), "LQD-RKHS-based distribution-to-distribution regression methodology for restoring the probability distributions of missing SHM data", Mech. Syst. Signal Pr., 121, 655-674. https://doi.org/10.1016/j.ymssp.2018.11.052.
  7. Ding, Y.L., Zhao, H.W. and Li, A.Q. (2017), "Temperature effects on strain influence lines and dynamic load factors in a steel-truss arch railway bridge using adaptive FIR filtering", J. Perform. Constr. Fac., 31(4), 04017024. https://doi.org/10.1061/(ASCE)CF.1943-5509.0001026.
  8. Hochreiter, S. and Schmidhuber, J. (1997), "Long short-term memory", Neural Comput., 9(8), 1735-1780. https://doi.org/ 10.1162/neco.1997.9.8.1735.
  9. Huang, H.B., Yi, T.H., Li, H.N. and Liu, H. (2020). "Strain-Based Performance Warning Method for Bridge Main Girders under Variable Operating Conditions", J. Bridge Eng., 25(4), 04020013. https://doi/org/10.1061/(ASCE)BE.1943-5592.0001538.
  10. Huang, Y., Beck, J.L., Wu, S. and Li, H. (2016), "Bayesian compressive sensing for approximately sparse signals and application to structural health monitoring signals for data loss recovery", Probabilist. Eng. Mech., 46, 62-79. https://doi.org/10.1016/j.probengmech.2016.08.001.
  11. Kingma, D.P. and Ba, J. (2015), "Adam: A method for stochastic optimization", ICLR 2015, San Diego, USA, May.
  12. Li, L., Liu, G., Zhang, L. and Li, Q. (2018). "Deep learning-based sensor fault detection using S-Long Short Term 1)Memory Networks", Struct. Monit. Maint., 5(1), 51-65. https://doi.org/10.12989/smm.2018.5.1.051.
  13. Ni, Y.Q. and Li, M. (2016), "Wind pressure data reconstruction using neural network techniques: A comparison between BPNN and GRNN", Measurement., 88, 468-476. https://doi.org/10.1016/j.measure ment.2016.04.049.
  14. Pei, X.Y., Yi, T.H., Qu, C.X. and Li, H.N. (2019). "Conditional information entropy based sensor placement method considering separated model error and measurement noise", J. Sound Vib., 449: 389-404. https://doi.org/10.1016/j.jsv.2019.02.035.
  15. Qu, C.X., Yi, T.H. and Li, H.N. (2019). "Mode identification by eigensystem realization algorithm through virtual frequency response function", Struct. Control Health Monit., 26(10), e2429. https://doi.org/10.1002/stc.2429.
  16. Rafiei, M.H. and Adeli, H. (2018). "A novel unsupervised deep learning model for global and local health condition assessment of structures", Eng. Struct., 156, 598-607. https://doi.org/10.1016/j.engstruct.2017.10.070.
  17. Schmidhuber, J. (2015), "Deep learning in neural networks: An overview", Neural networks., 61, 85-117. https://doi.org/10.1016/j.neunet.2014.09.003.
  18. Sola, J. and Sevilla, J. (1997), "Importance of input data normalization for the application of neural networks to complex industrial problems", IEEE T. Nuclear Sci., 44(3), 1464-1468. https://doi.org/10.1109/23.589532.
  19. Thadikemalla, V.S.G. and Gandhi, A.S. (2018), "A data loss recovery technique using compressive sensing for structural health monitoring applications", KSCE J. Civil Eng., 22(12), 5084-5093. https://doi.org/10.1007/s12205-017-2070-z.
  20. Wan, H. and Ni, Y.Q. (2019), "Bayesian multi-task learning methodology for reconstruction of structural health monitoring data", Struct. Health Monit., 18(4), 1282-1309. https://doi.org/10.1177/1475921718794953.
  21. Ye, X.W., Su, Y.H., Xi, P.S. and Liu, H. (2017), "Structural health monitoring data reconstruction of a concrete cable-stayed bridge based on wavelet multi-resolution analysis and support vector machine", Comput. Concrete., 20(5), 555-562. https://doi.org/10.12989/cac.2017.20.5.555.
  22. Zhang, A., Wang, K.C., Li, B., Yang, E., Dai, X., Peng, Y., Fei, Y., Liu, Y., Li, J. and Chen, C. (2017), "Automated pixel‐level pavement crack detection on 3D asphalt surfaces using a deep‐learning network", Comput. - Aided Civil Infrastruct. Eng., 32(10), 805-819. https://doi.org/10.1111/mice.12297.
  23. Zhao, H.W., Ding, Y.L., Li, A.Q., Ren, Z.Z. and Yang, K. (2019), "Live-load strain evaluation of the prestressed concrete box-girder bridge using deep learning and clustering", Struct. Health Monit., 1475921719875630. https://doi.org/10.1177/1475921719875630.
  24. Zhou, Z.H. (2016), Machine Learning, Tsinghua University Press, Beijing, China.

피인용 문헌

  1. Big data platform for health monitoring systems of multiple bridges vol.7, pp.4, 2020, https://doi.org/10.12989/smm.2020.7.4.345
  2. A Data Loss Recovery Technique Using EMD-BiGRU Algorithm for Structural Health Monitoring vol.11, pp.21, 2020, https://doi.org/10.3390/app112110072