References
- D. Philippe, W. Katia, R. Belkacem, M. Gerard, B. Ray, B. Michelle, L. Stephane, B. Pascal, Austenitic steel corrosion in IGCC environment: Characterisation by photon and nuclear microprobes, Nucl. Instr. Meth. A, 181 (2001) 734-738. https://doi.org/10.1016/S0168-583X(01)00365-2
- G. G. Olkhovskii, Solid fuel gasification in the global energy sector (a review), Ther. Eng., 62 (2015) 465-472. https://doi.org/10.1134/S0040601515070071
- T. Y. Chae, J. W. Lee, Y. J. Lee, W. Yang, Study on the Co-firing of Sewage Sludge to a 80kWthscale pulverized coal combustion system, Clean Tech., 25 (2019) 74-80. https://doi.org/10.7464/KSCT.2019.25.1.074
- E. K. Hong, D. K. Chae, H. Y. Heo, A study on evaluation of boiler thermal performance change characteristics with sewage sludge combustion on coal fired power plant, Conf. Proc. Kor. Soc. Energy Eng., (2010) 139-144.
-
A. Holt, P. Kofstad, High temperature corrosion of iron in
$O_2$ +4%$SO_2/SO_3\;at\;500-800^{\circ}C$ , Mater. Sci. Eng. A, 120-121 (1989) 101-104. https://doi.org/10.1016/0921-5093(89)90725-9 -
W. Wu, Y. Niu, J. T. Guo, Y. Zhang, Sulfate induced corrosion behavior of FeAl intermetallic compound in
$O_2$ -0.5%($SO_2+SO_3$ ) atmosphere at$600-870^{\circ}C$ , High Temperature Corrosion of Advanced Materials and Protective Coatings, 1st Ed., North Holland (1992) 301-307. -
K. H. Jung, S. J. Kim, Corrosion and strength degradation characteristics of 1.25Cr-0.5Mo steel under
$SO_2$ gas environment, J. Kor. Inst. Surf. Eng., 51 (2018) 149-156. https://doi.org/10.5695/JKISE.2018.51.3.149 - H. Kassman, L. Bafver, L. E. Amand, The importance of SO2 and SO3 for sulphation of gaseous KCl-an experimental investigation in a biomass fired CFB boiler, Combust Flame, 157 (2010) 1649-1657. https://doi.org/10.1016/j.combustflame.2010.05.012
- J. Pettersson, C. Pettersson, N. Folkeson, L. G. Johansson, E. Skog, J. E. Svensson, The influence of sulphur additions on the corrosive environment in a waste-fired CFB boiler, Mater. Sci. Forum, (2006) 563-570.
-
B. A pint, J. R. Martin, L. W. Hobbs, The oxidation mechanism of
$Al_2O_3$ scales, Solid State Ionics, 78 (1995) 99-107. https://doi.org/10.1016/0167-2738(95)00013-V - Y. F. Zhou, J. S. Li, J. X. Lu, C. Cheeseman, C. S. Poon, Recycling incinerated sewage sludge ash (ISSA) as a cementitious binder by lime activation, J. Cleaner Prod., 244 (2020) 1-9.
- H. H. Lee, J. E. Lee and J. G. Sohn, A study on the non - heating cement to solidify sewage sludge with by-products of Iron & steel work, RIST research report, 16 (2002) 147-154.
- A. Yousef, T. Annika, H. Pamela, N. Rikard, The effect of co-firing sewage sludge with used wood on the corrosion of an FeCrAl alloy and a nickelbased alloy in the furnace region, Fuel Proc. Tech., 138 (2015) 805-813. https://doi.org/10.1016/j.fuproc.2015.07.014
- S. Karlsson, L. E. Amand, J. Liske, Reducing high-temperature corrosion on high-alloyed stainless steel superheaters by co-combustion of municipal sewage sludge in a fluidised bed boiler, Fuel 139 (2015) 482-493. https://doi.org/10.1016/j.fuel.2014.09.007
- Y. S. Lee, Intergranular corrosion of stainless steel, Corro. Sci. Tech., 17 (2018) 183-192.
- H. J. Jang, C, J. Park, Effects of alloying elements on the corrosion resistance of (16-19)Cr ferritic cast stainless steel for automotive exhaust parts, Conf. Proc. Kor. Soc. Automotive Eng., (2011) 19-25.
- S. Y. Lee, Y. S. Kim, H. R. Jeong, S. H. Ahn, K. W. Nam, Corrosion resistance characteristics of Cr-free coating solution for degraded STS316L, Kor. Soc. Ocean Eng., 29 (2015) 475-480.
- Technical Committee ISO/TC 156, Corrosion of metals and alloys -Method for metallographic examination of samples after exposure to hightemperature corrosive environments, ISO 26146, (2012).
- S. K. Kim, D. B. Lee, Effect of Al and Cr contents on the high temperature oxidation- and sulfidation-resistance of Fe alloys, Kor. Inst. Surf. Eng., 45 (2012) 61-69. https://doi.org/10.5695/JKISE.2012.45.2.061
- D. Young, High Temperature Oxidation, and Corrosion of Metals, Elsevier, Amsterdam (2008).
- N. Birks, G. H. Meier, and F. S. Pettit, Introduction to High Temperature Oxidation of Metals, 2nd Ed., Cambridge Univ. (2006).
- A. S. Khanna, Introduction to high temperature oxidation and corrosion, ASM international (2002).