Steel and Composite Structures

  • 제35권3호
  • /
  • Pages.405-413
  • /
  • 2020
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Buckling analysis of steel plates in composite structures with novel shape function

  • Qin, Ying (Key Laboratory of Concrete and Prestressed Concrete Structures of Ministry of Education, School of Civil Engineering, Southeast University) ;
  • Luo, Ke-Rong (Key Laboratory of Concrete and Prestressed Concrete Structures of Ministry of Education, School of Civil Engineering, Southeast University) ;
  • Yan, Xin (Key Laboratory of Concrete and Prestressed Concrete Structures of Ministry of Education, School of Civil Engineering, Southeast University)
  • 투고 : 2019.10.04
  • 심사 : 2020.04.24
  • 발행 : 2020.05.10
⟨ 이전 논문 다음 논문 ⟩

초록

Current study on the buckling analysis of steel plate in composite structures normally focuses on applying finite element method to derive the buckling stress. However, it is time consuming, computationally complicated and tedious for general use in design by civil engineers. Therefore, in this study an analytical study is conducted to predict the buckling behavior of steel plates in composite structures. Hand calculation method was proposed based on energy principle. Novel buckling shapes with biquadratic functions along both loaded and unloaded direction were proposed to satisfy the boundary condition. Explicit solutions for predicting the critical local buckling stress of steel plate is obtained based on the Rayleigh-Ritz approach. The obtained results are compared with both experimental and numerical data. Good agreement has been achieved. Furthermore, the influences of key factors such as aspect ratio, width to thickness ratio, and elastic restraint stiffness on the local buckling performance are comprehensively discussed.

키워드

과제정보

This work is sponsored by the Natural Science Foundation of Jiangsu Province (Grant No. BK20170685), and the National Key Research and Development Program of China (Grant No. 2017YFC0703802).

참고문헌

  1. Asgarian, B., Khazaee, H. and Mirtaheri, M. (2012), "Performance evaluation of different types of steel moment resisting frames subjected to strong ground motion through incremental dynamic analysis", Int. J. Steel Struct., 12(3), 363-379. https://doi.org/10.1007/s13296-012-3006-6.
  2. Belkacem, A., Tahar, H.D., Abderrezak, R., Amine, B.M., Mohamed, Z. and Boussad, A. (2018), "Mechanical buckling analysis of hybrid laminated composite plates under different boundary conditions", Struct. Eng. Mech., 66(6), 761-769. https://doi.org/10.12989/sem.2018.66.6.761.
  3. Bellifa, H., Bakora, A., Tounsi, A., Bousahla, A.A. and Mahmoud, S.R. (2017), "An efficient and simple four variable refined plate theory for buckling analysis of functionally graded plates", Steel Compos. Struct., 25(3), 257-270. https://doi.org/10.12989/scs.2017.25.3.257.
  4. Bridge, R.Q. and O'Shea, M.D. (1998), "behaviour of thin-walled steel box sections with or without internal restraint", J. Constr. Steel Res., 47, 73-91. https://doi.org/10.1016/S0143-974X(98)80103-X.
  5. Bleich, F. (1952). Buckling strength of metal structures, McGraw-Hill (New York).
  6. Cai, J. and Long, Y.L. (2009), "Local buckling of steel plates in rectangular CFT columns with binding bars", J. Constr. Steel Res., 65, 965-972. https://doi.org/10.1016/j.jcsr.2008.07.025.
  7. Dong, J.H., Ma, X., Zhuge, Y. and Mills, J.E. (2017), "Shear buckling analysis of laminated plates on tensionless elastic foundations", Steel Compos. Struct., 24(6), 697-709. https://doi.org/10.12989/scs.2017.24.6.697.
  8. Gheidi, A., Mirtaheri, M., Zandi, A.P. and Alanjari, P. (2011), "Effect of filler material on local and global behaviour of buckling-restrained braces", Struct. Des. Tall Spec.l Build., 20(6), 700-710. https://doi.org/10.1002/tal.555.
  9. Jana, P. (2016), "Optimal design of uniaxially compressed perforated rectangular plate for maximum buckling load", Thin Wall. Struct., 103, 225-230. https://doi.org/10.1016/j.tws.2015.12.027.
  10. Javani, R., Bidgoli, M.R. and Kolahchi, R. (2019), "Buckling analysis of plates reinforced by Graphene platelet based on Halpin-Tsai and Reddy theories", Steel Compos. Struct., 31(4), 419-426. https://doi.org/10.12989/scs.2019.31.4.419.
  11. Kanishchev, R. and Kvocak, V. (2019), "Local buckling of rectangular steel tubes filled with concrete", Steel Compos. Struct., 31(2), 201-216. https://doi.org/10.12989/scs.2019.31.2.201.
  12. Kim, H.S., Park, Y.M., Kim, B.J. and Kim, K. (2018), "Numerical investigation of buckling strength of longitudinally stiffened web of plate girders subjected to bending", Struct. Eng. Mech., 65(2), 141-154. https://doi.org/10.12989/sem.2018.65.2.141.
  13. Kolahdouzan, F., Arani, A.G. and Abodollahian, M. (2018), "Buckling and free vibration analysis of FG-CNTRC-micro sandwich plate", Steel Compos. Struct., 26(3), 273-287. https://doi.org/10.12989/scs.2018.26.3.273.
  14. Liang, Q.Q., Uy, B. and Liew, J.Y.R. (2007), "Local buckling of steel plates in concrete-filled thin-walled steel tubular beam-columns", J. Constr. Steel Res., 63, 396-405. https://doi.org/10.1016/j.jcsr.2006.05.004.
  15. Long, Y.L., Wan, J. and Cai, J. (2016), "Theoretical study on local buckling of rectangular CFT columns under eccentric compression", J. Constr. Steel Res., 120, 70-80. https://doi.org/10.1016/j.jcsr.2015.12.029.
  16. Li, L.Z., Jiang, C.J., Jia, L.J.and Lu, Z.D. (2016), "Local buckling of bolted steel plates with different stiffener configuration", Eng. Struct., 119, 186-197. https://doi.org/10.1016/j.engstruct.2016.03.053.
  17. Millar, F. and Mora, D. (2015), "A finite element method for the buckling problem of simply supported Kirchhoff plates", J. Comput. Appl. Math., 286, 68-78. https://doi.org/10.1016/j.cam.2015.02.018.
  18. Mirtaheri, M., Gheidi, A., Zandi, A.P., Alanjari, P. and Samani, H.R. (2011), "Experimental optimization studies on steel core lengths in buckling restrained braces", J. Constr. Steel Res., 67(8), 1244-1253. https://doi.org/10.1016/j.jcsr.2011.03.004.
  19. Mirtaheri, M., Amini, M. and Khorshidi, H. (2017),. "Incremental dynamic analyses of concrete buildings reinforced with shape memory alloy", Steel Compos. Struct., 23(1), 95-105. https://doi.org/10.12989/scs.2017.23.1.095.
  20. Mirtaheri, M., Sehat, S. and Nazeryan, M. (2018), "Improving the behavior of buckling restrained braces through obtaining optimum steel core length", Struct. Eng. Mech., 65(4), 401-408. https://doi.org/10.12989/sem.2018.65.4.401.
  21. Mirtaheri, M., Emami, F., Zoghi, M.A. and Salkhordeh, M. (2019). "Mitigation of progressive collapse in steel structures using a new passive connection", Struct. Eng. Mech., 70(4), 381-394. https://doi.org/10.12989/sem.2019.70.4.381.
  22. Mo, S.X., Zhao, R.D. and Zhong, X.G. (2004), "Local buckling research on concrete filled square steel box member", J. Hunan Uni. Sci. Tech., 19, 43-46. https://doi.org/10.3969/j.issn.1672-9102.2004.03.011
  23. Panahandeh-Shahraki, D., Mirdamadi, H.R. and Vaseghi, O. (2015), "Thermoelastic buckling analysis of laminated piezoelectric composite plates", Int. J. Mech. Mater. Des., 11(4), 371-385. https://doi.org/10.1007/s10999-014-9284-8.
  24. Qin, Y., Lu, J.Y. and Cao, S. (2017), "Theoretical study on local buckling of steel plate in concrete-filled tube column under axial compression", ISIJ Int., 57(9), 1645-1651. http://dx.doi.org/10.2355/isijinternational.ISIJINT-2016-755.
  25. Qin, Y., Du, E.F., Li, Y.W. and Zhang, J.Z. (2018a), "Local buckling of steel plates in composite structures under combined bending and compression", ISIS Int., 58(11), 2133-2141. https://doi.org/10.2355/isijinternational.ISIJINT-2018-202
  26. Qin, Y., Shu, G.P., Du, E.F. and Lu, R.H. (2018b), "Buckling analysis of elastically-restrained steel plates under eccentric compression", Steel Compos. Struct., 29(3), 379-389. https://doi.org/10.12989/scs.2018.29.3.379.
  27. Samani, H.R., Mirtaheri, M., Zandi, A.P. and Bahai, H. (2014), "The effects of dynamic loading on hysteretic behavior of frictional dampers", Shock Vib., 2014, 181534. https://doi.org/10.1155/2014/181534.
  28. Shahsavari, D., Karami, B. and Janghorban, M. (2019), "On buckling analysis of laminated composite plates using a nonlocal refined four-variable model", Steel Compos. Struct., 32(2), 173-187. https://doi.org/10.12989/scs.2019.32.2.173.
  29. Soltani, K., Bessaim, A., Houari, M.S.A., Kaci, A., Benguediab, M., Tounsi, A. and Alhodaly, M.S. (2019), "A novel hyperbolic shear deformation theory for the mechanical buckling analysis of advanced composite plates resting on elastic foundations", Steel Compos. Struct., 30(1), 13-29. https://doi.org/10.12989/scs.2019.30.1.013.
  30. Stollenwerk, K. and Wagner, A. (2015), "Optimality conditions for the buckling of a clamped plate", J. Math. Anal. Appl., 432(1), 254-273. https://doi.org/10.1016/j.jmaa.2015.06.035.
  31. Timoshenko, S.P., and Gere, J.M. (1961). Theory of Elastic Stability, 2nd edition, Mcgraw-Hill (New York).
  32. Uy, B. (1998), "Local and post-local buckling of concrete-filled steel welded box columns", J. Constr. Steel Res., 47, 47-72. https://doi.org/10.1016/S0143-974X(98)80102-8.
  33. Uy, B. (2001), "Local and postlocal buckling of fabricated steel and composite cross sections." J. Struct. Eng., 127, 666-677. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:6(666)
  34. Xu, K., Yuan, Y. and Li, M. (2019), "Buckling behavior of functionally graded porous plates integrated with laminated composite faces sheets", Steel Compos. Struct., 32(5), 633-642. https://doi.org/10.12989/scs.2019.32.5.633.
  35. Zoghi, M.A. and Mirtaheri, M. (2016), "Progressive collapse analysis of steel building considering effects of infill panels", Struct. Eng. Mech., 59(1), 59-82. https://doi.org/10.12989/sem.2016.59.1.059.

피인용 문헌

  1. Mechanical and thermal buckling analysis of laminated composite plates vol.40, pp.5, 2020, https://doi.org/10.12989/scs.2021.40.5.697