Structural Engineering and Mechanics

  • 제74권2호
  • /
  • Pages.267-282
  • /
  • 2020
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Seismic assessment of thin steel plate shear walls with outrigger system

  • Fathy, Ebtsam (Structural Engineering Department, Faculty of Engineering, Zagazig University)
  • 투고 : 2018.08.02
  • 심사 : 2019.12.12
  • 발행 : 2020.04.25
⟨ 이전 논문 다음 논문 ⟩

초록

The seismic performance and failure modes of the dual system of moment resisting frames and thin steel plate shear walls (TSPSWs) without and with one or two outrigger trusses are studied in this paper. These structural systems were utilized to resist vertical and lateral loads of 40-storey buildings. Detailed Finite element models associated with nonlinear time history analyses were used to examine seismic capacity and plastic mechanism of the buildings. The analyses were performed under increased levels of earthquake intensities. The models with one and two outriggers showed good performance during the maximum considered earthquake (MCE), while the stress of TSPSWs in the model without outrigger reached its ultimate value under this earthquake. The best seismic capacity was in favour of the model with two outriggers, where it is found that increasing the number of outriggers not only gives more reduction in lateral displacement but also reduces stress concentration on thin steel plate shear walls at outrigger floors, which caused the early failure of TSPSWs in model with one outrigger.

키워드

참고문헌

  1. AISC 341-10 (2010), Seismic provisions for structural steel buildings, American Institute of Steel Construction, Chicago, IL.
  2. ANSYS 15.0 (2013), ANSYS documentation; ANSYS Inc.
  3. Behbahanifard, M.R., Grondin, G. Y. and Elwi, A. E. (2003) "Experimental and numerical investigation of steel plate shear wall", Structural Engineering Report 254; Department of Civil Engineering, University of Alberta, Edmonton, Alberta, Canada.
  4. Brunesi, E., Nascimbene, R. and Casagrande, L. (2016), "Seismic analysis of high-rise mega-braced frame-core buildings", J. Eng. Struct., 115, 1-17. https://doi.org/10.1016/j.engstruct.2016.02.019
  5. Choi, I. R., and Park, H. G. (2008) "Ductility and energy dissipation capacity of shear-dominated steel plate walls." J. Struct. Eng., ASCE, 134(9), 1495-1507. https://doi.org/10.1061/(asce)0733-9445(2008)134:9(1495)
  6. Choi, I. R., and Park, H. G. (2009) "Steel plate shear walls with various infill plate designs." J. Struct. Eng., ASCE, 135(7), 785-796. https://doi.org/10.1061/(asce)0733-9445(2009)135:7(785)
  7. Choi, H. S., Ho, G., Joseph, L. and Mathias, N. (2012) "Outrigger design for high rise buildings: an output of CTBUH outrigger working group", CTBUH Technical Guide, Council on Tall Buildings and Urban Habitat, Chicago.
  8. Choi, S.W., Kim, I. S., Park, J. H., Kim, Y., Sohn, H. G. and. Park, H. S. (2013), "Evaluation of stiffness changes in a high-rise building by measurements of lateral displacement using GPS technology", Sensors, 13(11), 15489-15503. https://doi.org/10.3390/s131115489
  9. Chung, Y. L., Nagae, T., Hitaka, T. and Nakashima, M. (2010), "Seismic resistance capacity of high-rise buildings subjected to long-period ground motions: E-Defense shaking table test", J. Struct. Eng., 136(6), 637-644. https://doi.org/10.1061/(asce)st.1943-541x.0000161
  10. Civalek, O. (2007), "Linear vibration analysis of isotropic conical shells by discrete singular convolution (DSC)." Structural Engineering and Mechanics, an Int'l Journal, 25(1), 127-130. https://doi.org/10.12989/sem.2007.25.1.127
  11. Civalek, O. (2007), "Nonlinear dynamic response of MDOF systems by the method of harmonic differential quadrature (HDQ)." Structural Engineering and Mechanics, an Int'l Journal, 25(2), 201-217 https://doi.org/10.12989/sem.2007.25.2.201
  12. CSA-S16-09. (2009), Design of Steel Structures, Canadian Standards Association, Toronto.
  13. Du, Y., Chen, Z. and Yu, Y. (2016), "Behavior of rectangular concrete-filled high-strength steel tubular columns with different aspect ratio", Thin-Walled Structures, 109, 304-318. https://doi.org/10.1016/j.tws.2016.10.005
  14. Du, Y., Chen, Z. and Xiong, M.X. (2016), "Experimental behavior and design method of rectangular concrete-filled tubular columns using Q460 high-strength steel", Constr. Build. Mater., 125, 856-872. https://doi.org/10.1016/j.conbuildmat.2016.08.057
  15. Du, Y., Chen, Z., Liew, J.Y. R. and Xiong, M.X. (2017), "Rectangular concrete-filled steel tubular beam-columns using high-strength steel: Experiments and design", J. Constr. Steel Res., 131, 1-18. https://doi.org/10.1016/j.jcsr.2016.12.016
  16. EN-1990 (2010), Eurocode, Basis of Structural Design. European Committee for Standardization, Brussels.
  17. EN-1992-1-1 (2004), Eurocode 2, Design of Concrete Structures Resistance. Part 1-1: General rules and rules for buildings, European Committee for Standardization, Brussels.
  18. EN 1993-1-1 (2005), Eurocode 3, Design of Steel structures. Part 1-1: General rules - General rules and rules for buildings, European Committee for Standardization, Brussels.
  19. EN 1993-1-5 (2006), Eurocode 3, Design of steel structures. Part 1-5: General rules - Plated structural elements, European Committee for Standardization, Brussels.
  20. EN-1994-1-1 (2004), Eurocode 4, Design of composite steel and concrete structures Resistance. Part 1: General rules and rules for buildings, European Committee for Standardization, Brussels.
  21. EN-1998-1(2004), Eurocode 8, Design of Structures for Earthquake Resistance. Part 1: General rules, seismic actions and rules for buildings, European Committee for Standardization, Brussels.
  22. Epackachi, S., Mirghaderi, R., Esmaili, O., Behbahani, A. A. T. and Vahdani, S. (2012), "Seismic evaluation of a 56-storey residential reinforced concrete high-rise building based on nonlinear dynamic time-history analyses", J. Struct. Design Tall Spec. Build., 21(4), 233-248. https://doi.org/10.1002/tal.586
  23. Fan, H., Li, Q.S., Tuan, A.Y. and Xu, L. (2009), "Seismic analysis of the world's tallest building", J. Constr. Steel. Res., 65(5) 1206-1215. https://doi.org/10.1016/j.jcsr.2008.10.005
  24. FEMA-350 (2000), NEHRP Recommended seismic design criteria for new steel moment frame buildings. Federal Emergency, Washington, D.C., USA.
  25. FEMA-450 (2003), NEHRP Recommended Provisions for Seismic Regulations for New Buildings and Other Structures, Part 1: Provisions. Federal Emergency Management Agency, Washington, D.C., USA.
  26. Gantes, C.J., Vayas, I., Spiliopoulos, A., Pouangare, C. C. (2001), "Bending and shear stiffness optimization for rigid and braced multi-story steel frames." Steel and Composite Structures, an Int'l Journal, 1(4), 377-392. https://doi.org/10.12989/scs.2001.1.4.377
  27. George A. Papagiannopoulos and Beskos, D. E. (2011), "Modal strength reduction factors for seismic design of plane steel frames." Earthquakes and Structures, an Int'l Journal, 2(1), 65-88. https://doi.org/10.12989/eas.2011.2.1.065
  28. Ghannadi, P. and Kourehli, S. S. (2019), "Model updating and damage detection in multi-story shear frames using Salp Swarm Algorithm." Earthquakes and Structures, an Int'l Journal, 17(1), 63-73.
  29. Ashkezari G. D. (2018), "A performance based strategy for design of steel moment frames under blast loading." Earthquakes and Structures, an Int'l Journal, 15(2), 155-164.
  30. Gholipour, M. and Alinia, M. M. (2016), "Behavior of multi-story code-designed steel plate shear wall structures regarding bay width", J. Constr. Steel. Res., 122, 40-56. https://doi.org/10.1016/j.jcsr.2016.01.020
  31. Gunal, M. H. and Ilgin, H. E. (2014), Tall Buildings Structural Systems and Aerodynamic Form, Routledge, Taylor and Francis Group, London and New York.
  32. Guo, L., Jia, M., Li, R. and Zhang, S. (2013), "Hysteretic analysis of thin steel plate shear walls", International Journal of Steel Structures, 13(1), 163-174. https://doi.org/10.1007/s13296-013-1015-8
  33. Guo, H. C., Hao, J. P. and Liu, Y. H. (2015), "Behavior of stiffened and unstiffened steel plate shear walls considering joint properties", Thin-Walled Structures, 97, 53-62. https://doi.org/10.1016/j.tws.2015.09.005
  34. Hoenderkamp, J. C. D. and Bakker, M. C. M. (2003), "Analysis of high-rise braced frames with outriggers", J. Struct. Design Tall Spec. Build.,12(4), 335-350.
  35. Hoenderkamp, J. C.D. (2008), "Second outrigger at optimum location on high-rise shear wall", J. Struct. Design Tall Spec. Build., 17(3), 619-634. https://doi.org/10.1002/tal.369
  36. Hosseinzadeh, S.A.A. and Tehranizadeh, M. (2014), "Behavioral characteristics of code designed steel plate shear wall systems", J. Constr. Steel. Res., 99, 72-84. https://doi.org/10.1016/j.jcsr.2014.04.004
  37. Hu, H.T., Huang, C.S., Wu, M.H. and Wu, Y.M. (2003), "Nonlinear analysis of axially loaded concrete-filled tube columns with confinement effect", J. Struct. Eng., 129(10),1322-1329. https://doi.org/10.1061/(asce)0733-9445(2003)129:10(1322)
  38. Ji, X., Kajiwara, K., Nagae, T., Enokida, R. and Nakashima, M. (2009), "A substructure shaking table tests for reproduction of earthquake responses of high-rise buildings", J. Earthquake Engng Struct. Dyn., 38(12),1381-1399. https://doi.org/10.1002/eqe.907
  39. Jiang, H., Lu, X. and Zhu, J. (2012), "Performance-based seismic analysis and design of code-exceeding tall buildings in Mainland China", Struct. Eng. Mech., Int. J., 43(4), 545-560. https://doi.org/10.12989/sem.2012.43.4.545
  40. Lee, J., Park, D., Lee, K. and Ahn, N. (2013), "Geometric nonlinear analysis of tall building structures with outriggers", J. Struct. Design Tall Spec. Build., 22(5), 454-470. https://doi.org/10.1002/tal.715
  41. Lee, S. and Tovar, A. (2014), "Outrigger placement in tall buildings using topology optimization", J. Eng. Struct., 74, 122-129. https://doi.org/10.1016/j.engstruct.2014.05.019
  42. Li, M., Lu, X., Lu, X. and Ye, L. (2014), "Influence of soil-structure interaction on seismic collapse resistance of super-tall buildings", J. Rock Mech. Geotech. Eng., 6(5), 477-485 https://doi.org/10.1016/j.jrmge.2014.04.006
  43. Li, Q. S. and Wu, J. R. (2004), "Correlation of dynamic characteristics of a super-tall building from full-scale measurements and numerical analysis with various finite element models", J. Earthquake Engng Struct. Dyn.,33, 1311-1336. https://doi.org/10.1002/eqe.405
  44. Liew, J.Y., Xiong, M. and Xiong, D. (2016), "Design of Concrete Filled Tubular Beam-columns with High Strength Steel and Concrete", Structures, 8(2), 213-226. https://doi.org/10.1016/j.istruc.2016.05.005
  45. lu, X., Chen, Y. and Mao, Y. (2012), "Shaking table model test and numerical analysis of a super tall building with high-level transfer storey", J. Struct. Design Tall Spec. Build., 21(10), 699-723. https://doi.org/10.1002/tal.632
  46. Lu, X., Su, N. and Zhou, Y. (2013), "Nonlinear time history analysis of a super-tall building with setbacks in elevation", J. Struct. Design Tall Spec. Build., 22(7), 593-614. https://doi.org/10.1002/tal.717
  47. Lu, Z., Chen, X., Lu, X. and Yang, Z. (2016), "Shaking table test and numerical simulation of an RC frame-core tube structure for earthquake-induced collapse", J. Earthquake Engng Struct. Dyn., 45(9), 1537-1556. https://doi.org/10.1002/eqe.2723
  48. Meng, W., Weigum, Y., Yongjiu, S. and Jian, X. (2015), "Seismic behaviors of steel plate shear wall structures with construction details and material", J. Constr. Steel. Res., 107, 194-210. https://doi.org/10.1016/j.jcsr.2015.01.007
  49. Park, H. S., Hong, K., and Seo, J. H. (2002), "Drift design of steel-frame shear-wall systems for tall buildings", J. Struct. Design Tall Spec. Build, 11(1), 35-49. https://doi.org/10.1002/tal.187
  50. Patil, D. M. and Sangle, K. K. (2016), "Seismic Behaviour of Outrigger Braced Systems in High Rise 2-D Steel Buildings", Structures, 8(1), 1-16. https://doi.org/10.1016/j.istruc.2016.07.005
  51. Purba, R. and Bruneau, M. (2014) "Seismic performance of steel plate shear walls considering various design approaches" Technical report MCEER-14-0005, Multidisciplinary Centre for Earthquake Engineering Research, State University of New York at Buffalo, Buffalo, New York.
  52. Purba, R. and Bruneau, M. (2015), "Experimental investigation of steel plate shear walls with in-span plastification along horizontal boundary elements", J. Eng. Struct., 97, 68-79. https://doi.org/10.1016/j.engstruct.2015.04.008
  53. SAP2000 v15. (2010), Integrated software for structural analysis and design. Computers and Structures, Inc., Berkeley, CA.
  54. Vatansever, C. and Yardimci, N. (2011), "Experimental investigation of thin steel plate shear walls with different infill-to-boundary frame connections", Steel Compos. Struct., Int. J., 11(3), 251-271. https://doi.org/10.12989/scs.2011.11.3.251
  55. Vian, D. and Bruneau, M. (2005) "Steel plate shear walls for seismic design and retrofit of building structures" Technical report MCEER-05-0010, Multidisciplinary Centre for Earthquake Engineering Research, State University of New York at Buffalo, Buffalo, New York.
  56. Wang, M., Shi, Y., Xu, J., Yang, W. and Li, Y. (2015), "Experimental and numerical study of unstiffened steel plate shear wall structures", J. Constr. Steel. Res., 112, 373-386. https://doi.org/10.1016/j.jcsr.2015.05.002
  57. Wu, Y.T., Kang, D. Y. and Yang, Y. B. (2016), "Seismic performance of steel and concrete composite shear walls with embedded steel truss for use in high-rise buildings", J. Eng. Struct., 125, 39-53. https://doi.org/10.1016/j.engstruct.2016.06.050
  58. Youssef, N., Wilkerson, R., Fischer, K. and Tunick, D. (2010), "Seismic performance of a 55-storey steel plate shear wall", J. Struct. Design Tall Spec. Build., 19, 139-165.
  59. Zeidabadi, N. A., Mirtalaeand, K. and Mobasher, B. (2004), "Optimized use of the outrigger system to stiffen the coupled shear walls in tall buildings", J. Struct. Design Tall Spec. Build., 13(1), 9-27. https://doi.org/10.1002/tal.228
  60. Zhou, Y., Zhang, C. and Lu, X. (2016), "An inter-story drift-based parameter analysis of optimal location of outriggers in tall buildings", J. Struct. Design Tall Spec. Build., 25(5), 215-231. https://doi.org/10.1002/tal.1236
  61. Zirakian, T. and Zhang, J. (2015), "Structural performance of unstiffened low yield point steel plate shear walls", J. Constr. Steel. Res., 112, 40-53. https://doi.org/10.1016/j.jcsr.2015.04.023