Advances in Computational Design

  • 제5권2호
  • /
  • Pages.127-146
  • /
  • 2020
  • /
  • 2383-8477(pISSN)
  • /
  • 2466-0523(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

A semi-automated method for integrating textural and material data into as-built BIM using TIS

  • Zabin, Asem (Department of Civil Engineering, American University of Sharjah) ;
  • Khalil, Baha (Department of Mathematics and Statistics, American University of Sharjah) ;
  • Ali, Tarig (Department of Civil Engineering, American University of Sharjah) ;
  • Abdalla, Jamal A. (Department of Civil Engineering, American University of Sharjah) ;
  • Elaksher, Ahmed (New Mexico State University)
  • 투고 : 2019.06.08
  • 심사 : 2019.10.01
  • 발행 : 2020.04.25
⟨ 이전 논문 다음 논문 ⟩

초록

Building Information Modeling (BIM) is increasingly used throughout the facility's life cycle for various applications, such as design, construction, facility management, and maintenance. For existing buildings, the geometry of as-built BIM is often constructed using dense, three dimensional (3D) point clouds data obtained with laser scanners. Traditionally, as-built BIM systems do not contain the material and textural information of the buildings' elements. This paper presents a semi-automatic method for generation of material and texture rich as-built BIM. The method captures and integrates material and textural information of building elements into as-built BIM using thermal infrared sensing (TIS). The proposed method uses TIS to capture thermal images of the interior walls of an existing building. These images are then processed to extract the interior walls using a segmentation algorithm. The digital numbers in the resulted images are then transformed into radiance values that represent the emitted thermal infrared radiation. Machine learning techniques are then applied to build a correlation between the radiance values and the material type in each image. The radiance values were used to extract textural information from the images. The extracted textural and material information are then robustly integrated into the as-built BIM providing the data needed for the assessment of building conditions in general including energy efficiency, among others.

키워드

참고문헌

  1. Abdalla, J. A. and Eltayeb, T. M. (2018), "An Integrated Building Information Model (iBIM) for Design of Reinforced Concrete Structures", Proceedings of the 17th International Conference on Computing in Civil and Building Engineering, Tampere, Finland, June 4-7.
  2. Abdalla, J. and Law, K. (2014), "A Framework for Building Information Model for Energy Performance Rating and Simulation", Proceedings of the 15th International Conference on Computing in Civil and Building Engineering, Orlando, FL, U.S.A., June 23-25.
  3. Abdalla, J., Phan, D.H.D. and Howard, H.C. (1991), "Form, function and behavior in structural engineering knowledge representation", Proceedings of the International Conference on the Application of Artificial Intelligence Techniques to Civil and Structural Engineering, Oxford, United Kingdom, September 3-5.
  4. Abdalla, J.A. and Powell, G.H. (1995), "An object design framework for structural engineering", Eng. Comput., 11(4), 213-226. https://doi.org/10.1007/BF01208815.
  5. Alkadri, M.F., Turrina, M. and Sariyildiz, S. (2018), "The use and potential applications of point clouds in simulation of solar radiation for solar access in urban contexts", Adv. Comput. Design, 3(4), 319-338. https://doi.org/10.12989/acd.2018.3.4.319.
  6. Ali, T. and Mehrabian, A. (2008), "A Novel computational paradigm for creating Triangular Irregular Network (TIN) from LiDAR Data", Nonlinear Analysis Series A: Theory, Methods & Applications, 71(12), 624-629. https://doi.org/10.1016/j.na.2008.11.081.
  7. Arayici, Y. (2008), "Towards Building Information Modelling for Existing Structures", Struct. Survey, 26(3), 210-220. https://doi.org/10.1108/02630800810887108.
  8. Armesto, J., Lubowiecka, I., Ordez, C. and Rial, F. I. (2009), "FEM Modeling of Structures Based on Close Range Digital Photogrammetry", Automation Construct., 18(5), 559-569. http://dx.doi.org/10.1016/j.autcon.2008.11.006.
  9. Akula, M., Lipma, R. R., Franaszek, M., Saidi, K. S., Cheok, G. S. and Kamat, V. R. (2013), "Real-time drill monitoring and control using building information models augmented with 3D imaging data", Automation Construct., 36(1), 1-15. https://doi.org/10.1016/j.autcon.2013.08.010.
  10. Balaras, C. and Argiriou, A. (2012), "Infrared Thermography for Building Diagnostics", J. Construct. Eng. Management, 138(3), 431-442. https://doi.org/10.1016/S0378-7788(01)00105-0.
  11. Balaras, C. (2002), "TOBUS A European Method and Software for Office Building Refurbishment", Energy and Buildings, 34(2), 111-112. https://doi.org/10.1016/S0378-7788(01)00099-8
  12. Becerik-Gerber, B., Jazizadeh, F., Li, N. and Calis, G. (2012), "Application Areas and Data Requirements for BIM-Enabled Facilities Management", J. Construct. Eng. Management, 138(3), 431-442. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000433.
  13. Celik, O., Terrell, T., Gul, M. and Catbas. F. N. (2018), "Sensor clustering technique for practical structural monitoring and maintenance", Struct. Monitor. Maintenance, 5(2), 273-295. https://doi.org/10.12989/smm.2018.5.2.273.
  14. Cho, Y. K., Ham, Y. and Golpavar-Fard, M. (2015), "3D As-is Build- ing Energy Modeling and Diagnostics: A Review of the State-of-the-Art", Adv. Eng. Informatics, 29(2), 184-195. https://doi.org/10.1016/j.aei.2015.03.004.
  15. Cho, C. Y., and Liu, X. and Akinci, B. (2018), "Recognizing Symbols in Building Mechanical Drawings for Automated Building Information Models Reconstruction", Proceedings of the 17th International Conference on Computing in Civil and Building Engineering, Tampere, Finland, June 4-7.
  16. Cho, C.Y., Liua, X. and Akinci, B. (2019), "Symbol recognition using vectorial signature matching for building mechanical drawings", Adv. Comput. Design, 4(2), 155-177. https://doi.org/10.12989/acd.2019.4.2.155.
  17. Cho, C. Y., and Liu, X. (2017), "An Automated Reconstruction Approach of Mechanical Systems in Building Information Modeling (BIM) Using 2D Drawings", ASCE International Workshop on Computing in Civil Engineering 2017, Seattle, Washington, USA, June 25-27.
  18. Dimitrov, A. and Golparvar-Fard, M. (2014), "Vision-based Material Recognition for Automated Monitoring of Construction Progress and Generating Building Information Modeling from Unordered Site Image Collections", Adv. Eng. Informatics, 28(1), 37-49. https://doi.org/10.1016/j.aei.2013.11.002.
  19. Eastman, C., Liston, K., Teicholz, P. and Sacks, R. (2011), BIM Handbook - A Guide to Building Information Modeling for Owners, Managers, Designers, Engineers and Contractors, Wiley, Hoboken, U.S.A.
  20. Fadoul, A, Tizani, W. and Koch, C. A. (2018), "BIM-based model for constructability assessment of conceptual design", Adv. Comput. Design, 3(4), 367-384. https://doi.org/10.12989/acd.2018.3.4.367.
  21. Fadoul, A.H. and Tizani, W. (2017), "Evaluation of current practice and associated challenges towards integrated design", Adv. Comput. Design, 2(2), 89-105. https://doi.org/10.12989/acd.2017.2.2.089.
  22. Francis, A., Miresco, E., and Le Meur, E. (2019), "Spatiotemporal chronographical modeling of procurement and material flow for building projects", Adv. Comput. Design, 4(2), 119-139. https://doi.org/10.12989/acd.2019.4.2.119.
  23. Gallaher, M., O'Connor, A., Dettbarn, J. L. and Gilday, L. (2004), "Cost analysis of Inadequate Interoperability in the U.S. Capital Facilities Industry", NIST GCR 04-867, NIST, U.S.A.
  24. Gao, T., Ergan, S., Akinci, B., and Garrett, J. H. (2014), "Evaluation of different features for matching point clouds to building information models", J. Comput. Civil Eng., https://doi.org/10.1061/(ASCE)CP.1943-5487.0000425. https://doi.org/10.1061/(ASCE)CP.1943-5487.0000425.
  25. Grinzato, E., Vavilov, V. and Kauppinen, T. (1998), "Quantitative Infrared Thermography in Buildings", Energy Buildings, 29(1), 1-9. https://doi.org/10.1016/S0378-7788(97)00039-X.
  26. Ham, Y. and Golpavar-Fard, M. (2014), "3D Visualization of thermal resistance and condensation problems using infrared thermography for building energy diagnostics", Visualization Eng., 2(12), 1-15. https://doi.org/10.1186/s40327-014-0012-0.
  27. Ham, Y. and Golparvar-Fard, M. (2014), "Updating R-Values of BIM Elements using 3D Thermography for Accurate Building Energy Performance Simulation", 2014 International Conference on Computing in Civil and Building Engineering, https://doi.org/10.1061/9780784413616.015.
  28. Ham Y. and Golpavar-Fard, M. (2015), "Mapping actual thermal properties to building elements in gbXML-based BIM for reliable building energy performance modeling", Automation Construct., 49, 214-224. https://doi.org/10.1016/j.autcon.2014.07.009.
  29. Hara, T., Shimomura, K, Hamano, K. and Miyake, S. (2019), "Automatic design, planning and drawing of scaffolding system for constructions", Adv. Comput. Design, 4(2), 179-196. https://doi.org/10.12989/acd.2019.4.2.179.
  30. Hunaidi, O., Chu, W., Wang, A. and Guan, W. (2000), "Detecting Leaks in Plastic Pipes", American Water Works Association, 92(2), 82-94. https://doi.org/10.1002/j.1551-8833.2000.tb08819.x.
  31. Ideate BIMLink [A Revit Add-in] (2015), Revit Modelling Plug-in for BIM Data Management; Ideate Software, CA, U.S.A. https://ideatesoftware.com/solutions/ideatebimlink
  32. Jung, J. Hong, S., Jeong, S., Kim, S., Cho, H., Hong, S. and Heo, J. (2014), "Productive Modeling for Development of As-built BIM of Existing Indoor Structures", Automation Construct., 42(4), 68-77. https://doi.org/10.1016/j.autcon.2014.02.021.
  33. Kiefer, R. and Lillesand, T. (2008), Remote Sensing and Image Interpretation, Wiley, Hoboken, U.S.A.
  34. Kim, B. and Lee, Y. (2017), "Genetic algorithms for balancing multiple variables in design practice", Adv. Comput. Design, 2(3), 241-256. https://doi.org/10.12989/acd.2017.2.3.225.
  35. Kottawar, V. G. and Rajurkar, A. M. (2014), "Color Feature Extraction in Content based Image Retrieval based on Quaternion Space", J. Comput. Appl., 107(20), 17-21. https://doi.org/10.5120/18867-0286.
  36. Klein, L., Li, N. and Becerik-Gerber, B. (2012), "Image-based verification of as-built documentation of operational buildings", Automation Construct., 21, 161-171. https://doi.org/10.1016/j.autcon.2011.05.023.
  37. Kuenzer, C. and Dech, S. (2013), Thermal Infrared Remote Sensing, Springer, Dordrecht, Germany.
  38. Lagela, S., Daz-Vilario, L. Martnez, J. and Armesto, J. (2013), "Automatic Thermographic and RGB Texture of As-built BIM for Energy Rehabilitation Purposes", Automation Construct., 31, 230-240. https://doi.org/10.1016/j.autcon.2012.12.013.
  39. Lu, Q., and Lee, S. (2017), "A Semi-Automatic Approach to Detect Structural Components from CAD Drawings for Constructing As-Is BIM Objects", ASCE International Workshop on Computing in Civil Engineering 2017, Seattle, Washington, USA, June 25-27. https://doi.org/10.1061/9780784480823.011.
  40. Maninder, P. (2010), "Detecting & Locating Leaks in Water Distribution Polyethylene Pipes", Proceedings of the World Congress on Engineering 2010, Vol II WCE 2010, London, U.K., June 30 -July 2.
  41. Meola, C. (2012), Infrared Thermography: Recent Advances and Future Trends, Bentham, Italy.
  42. Natephra, W., Motamedi, A., Yabuki, N. and Fukuda, T. (2017), "Integrating 4D thermal information with BIM for building envelope thermal performance analysis and thermal comfort evaluation in naturally ventilated environments", Building Environ., 124, 194-208. https://doi.org/10.1016/j.buildenv.2017.08.004.
  43. Natephra, W., Yabuki, N. and Fukuda, T. (2018), "Parametric modeling-based BIM for evaluating thermal performance of building envelope with real-time energy feedback visualization", Proceedings of the 17th International Conference on Computing in Civil and Building Engineering, Tampere, Finland, June 4-7.
  44. NIBS (2007), "United States Building Information Modeling Standard: Version 2 - Practice documents", National Institute of Building Science, NIBS.
  45. NIBS (2007), "United States National Building Information Modeling Standard: Version 1 - Part 1: Overview, Principles and Methodologies", National Institute of Building Sciences, NIBS.
  46. Roh, S., Aziz, Z. and Pea-Mora, F. (2011) "An object-based 3D walk-through model for interior construction progress monitoring", Automation Construct., 20(1), 66-75. https://doi.org/10.1016/j.autcon.2010.07.003.
  47. Rubinstein, R.Y. and Kroese, D.P. (2008), Simulation and the Monte Carlo Method, Wiley, Hoboken, U.S.A.
  48. Sandoval, C.A.O., Tizani, W. and Christian Koch, (2018), "A method for discrete event simulation and building information modelling integration using a game engine", Adv. Comput. Design, 3(4), 405-418. https://doi.org/10.12989/acd.2018.3.4.405.
  49. Santos, R. , Costa, A. A. and Grilo, A. (2017), "Bibliometric analysis and review of Building Information Modelling literature published between 2005 and 2015", Automation Construct., 80(1), 118-136. https://doi.org/10.1016/j.autcon.2017.03.005.
  50. Santos, D. S., Dionisio, M., Rodrigues, N., Pereira, A., and Leiria, I. I. I. (2011), "Efficient Creation of 3D Models from Buildings' Floor Plans", J. Interactive Worlds, 2011, 1-30. https://doi.org/5171/2011.897069.
  51. Smith, J. and Chang, S.F. (1996), "Automated Binary Texture Feature Sets for Image Retrieval", Proceedings of the International Conference on Acoustics, Speech, and Signal, Atlanta, GA, U.S.A, May.
  52. Tang, P., Huber, D., Akinci, B. Lipman, R. and Lytle, A. (2010), "Automatic reconstruction of as-built building information models from laser-scanned point clouds: a review of related techniques", Automation Construct., 19, 829-843. https://doi.org/10.1016/j.autcon.2010.06.007.
  53. Tafuri, A. N. and Yezzi, J. J. (1997), "Leak Detection and Leak Location in Underground Pipelines", International Oil Spill Conference Proceedings, 1997(1), 379-381. https://doi.org/10.7901/2169-3358-1997-1-379.
  54. Volk, R., Stengel, J. and Schultmann, F. (2014), "Building information modeling (bim) for existing buildings - literature review and future needs", Automation Construct., 43, 109-127. https://doi.org/10.1016/j.autcon.2013.10.023.
  55. Wang, C., Cho, Y. K. and Gai, M. (2013), "As-is 3D Thermal Modeling for Existing Building Envelopes Using a Hybrid LIDAR System", J. Comput. Civil Eng., 27(6), 645-656. https://doi.org/10.1061/(ASCE)CP.1943-5487.0000273.
  56. Yang, X. and Ergan, S. (2015), "Design and Evaluation of an Integrated Visualization Platform to Support Corrective Maintenance of HVAC Problem-Related Work Orders", J. Comput. Civil Eng., https://doi.org/10.1061/(ASCE)CP.1943-5487.0000510, 04015041.

피인용 문헌

  1. Development of BIM-Based Bridge Maintenance System Considering Maintenance Data Schema and Information System vol.13, pp.9, 2020, https://doi.org/10.3390/su13094858