참고문헌
- Jeong, U. H., Hyung, J. P., Lim, S. Y., Lim, H. W., Jang, J. S., "High Temperature Reliability Study of Low Frequency In-door Electrodeless Lamp," Journal of Applied Reliability, Vol. 14, No. 3, pp.203-207, 2014.
- Yang, H. D., Yoo, J. Y., Park, S. H., "A Study on Cooling Characteristics of the LED Lamp Heat Sink for Automobile by Forced Convection," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 17, No. 6, pp. 117-123, 2006. https://doi.org/10.14775/ksmpe.2018.17.6.117
- Chung, Y. I., Jung, D. C., Kim, Y. K., Park, D. H., "Study of the Characteristic and Optimization of Induction Lamp according to Gas Pressure and Amalgam Type," Journal of Korea Institute of Information Electronics and Communication Technology, Vol. 10, No. 1, pp. 23-30, 2017. https://doi.org/10.17661/jkiiect.2017.10.1.23
- Kim, J. H., Shim, K. j., Kong, T. W., Jeong, H. M., Chung, H. S., "A Study on the Temperature and Electrical Characteristics of Carbon Heater," Journal of the Korean Society for Powder System Engineering, Vol. 10, No. 1, pp. 71-76, 2006.
- Lee, I. S., Lee, K. H., "Development of High Efficiency Heater using Carbon Heating Material," The Journal of Korean Institute of Information Technology, Vol. 9, No. 6, pp. 33-37, 2011.
- Bae, K. Y., Lee, K. S., Kong, T. W., Chung, H. S., Jeong, H. Y., Chung, H. T., "A Study on Application of Warm Air Circulator by using the Carbon Heating Element with Particle Type," Journal of the Korean Society for Powder System Engineering, Vol. 7, No. 4, pp. 31-37, 2003.
- Kateb, B., Yamamoto, V., Yu, C., Grundfest, W., Gruen, J. P., "Infrared Thermal Imaging : a Review of the Literature and Case Report," Neurolmage, Vol. 47, No. 2, pp.154-162, 2009
- Cho, J. H., Hwang, H. S., "Image Processing Technology for Analyzing the Heating State of Carbon Fiber Surface Heating Element," Journal fo the Korean Academia Industrial, Vol. 19, No. 2, pp. 683-688, 2018.
- Kim, B. A., Moon, C. K., Choi, Y. M., "Effect of Heat Treatment on the Mechanical Properties of Carbon Fiber," Journal of the Korean Society for Powder System Engineering, Vol. 21, No. 5, pp. 13-19, 2017.
- Lee, S. J., Park, W. K., Lee, S. t., Lee, W. Y., Ha, M. K., "Characteristics of Heat Generation in Time of High Speed Machining using Infrared Thermal Imaging Camera," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 2, No. 3, pp. 26-33, 2003.
- Yang, J. Y., Yoon, D. H., Kim, B. S., Seo, M. K., "Preparation and Characterization of Pitch Based Carbon Paper for Low Energy and High Efficiency Surface Heating Elements," Composites Research, Vol. 31, No. 6, pp. 412-420, 2018.
- Nabais, J. M. V., Carrott, P. J. M., Carrott, M. M. L. R., Menendez, J. A., "Preparation and Modification of Activated Carbon Fibres by Microwave Heating," Carbon, Vol. 42, No. 7, pp. 1315-1320, 2014. https://doi.org/10.1016/j.carbon.2004.01.033
- Park, J. Y., Lee, J. D., "Electrical Properties of Carbon Black Composites for Flexible Fiber Heating Element," Journal of the Korean Oil Chemists Society, Vol. 32, No. 3, pp. 405-411, 2015. https://doi.org/10.12925/jkocs.2015.32.3.405
- Lee, J. H., Yoo, Y. J., Park, S. J., "Preparation and Electrical Properties of Carbon Paper using Chopped Carbon Fiber," Applied Chemistry for Engineering, Vol. 24, No. 2, pp. 121-125, 2013.
-
Zamel, N., Litovsky, E., Li, X., Kleiman, J., "Measurement of the Through Plane Thermal Conductivity of Carbon Paper Diffusion Media for the Temperature Range From
$-50^{\circ}C\;to\;+120^{\circ}C$ ," International Journal of Hydrogen Energy, Vol. 36, No. 2, pp. 12618-12625, 2011. https://doi.org/10.1016/j.ijhydene.2011.06.097 - Kim, M. T., Chang, S. Y., Oh, O. Y., Won, J. B., Park, H. W., "Failure Analysis of Enamel-coated Carbon Steel Heating Elements of Gas-gas Heater for Flue Gas Desulfurization System", Vol. 14, No. 4, pp.686-693, 2007. https://doi.org/10.1016/j.engfailanal.2006.02.009
- Galiguzov, A., Malakho, A., Kulakov, A., Keingfest, A., Kramarenko, E., Avdeev, V., "The Influence of Carbon Fiber Heat Treatment Temperature on Carbon Carbon Brakes Characteristics," Journal of the Carbon Letters, Vol. 14, No. 1, pp. 22-26, 2013. https://doi.org/10.5714/CL.2012.14.1.022