DOI QR코드

DOI QR Code

Gate Driver for Power Cell Driving of Bipolar Pulsed Power Modulator

양극성 펄스 파워 모듈레이터의 파워셀 구동을 위한 게이트 드라이버

  • Song, Seung-Ho (Department of Energy System Engineering, Chung-Ang University) ;
  • Lee, Seung-Hee (Department of Energy System Engineering, Chung-Ang University) ;
  • Ryoo, Hong-Je (Department of Energy System Engineering, Chung-Ang University)
  • Received : 2019.09.30
  • Accepted : 2019.12.10
  • Published : 2020.04.20

Abstract

This study proposes a gate driver that operates semiconductor switches in the bipolar pulsed power modulator. The proposed gate driver was designed to receive isolated power and synchronized signals through the gate transformer. The gate circuit has a separate delay in the on-and-off operation to prevent a short circuit between the top and bottom switches of each leg. On the basis of the proposed gate circuit, a bipolar pulsed power modulator prototype with a 2.5 kV/100 A rating was developed. Finally, the bipolar pulsed power modulator was tested under resistive load and plasma reactor load conditions. It is verified that the proposed gate driver can be applied to a bipolar pulsed power modulator.

Keywords

References

  1. B. L. Qin, Q. Zhang, G. V. Barbosa-Canovas, B. G. Swanson, and P. D. Pedrow, "Inactivation of microorganisms by pulsed electric fields of different voltage waveforms," IEEE Transactions on Dielectrics and Electrical Insulation, Vol. 1, No. 6, pp. 1047-1057, Dec. 1994. https://doi.org/10.1109/94.368658
  2. T. F. Wu, S. Y. Tseng, and J. C. Hung, "Generation of pulsed electric fields for processing microbes," IEEE Transactions on Plasma Science, Vol. 32, No. 4, pp. 1551-1562, Aug. 2004. https://doi.org/10.1109/TPS.2004.831732
  3. C. B. Arena, M. B. Sano, J. H. Rossmeisl, J. L. Caldwell, P. A. Garcia, M. N. Rylander, and R. V. Davalos, "High-frequency irreversible electroporation (H-FIRE) for non-thermal ablation without muscle contraction," Biomedical engineering online, Vol. 10, pp. 102, Nov. 2011. https://doi.org/10.1186/1475-925X-10-102
  4. J. H. Kim, S. C. Lee, B. K. Lee, S. V. Shenderey, J. S. Kim, and G. H. Rim, "A high-voltage bipolar pulse generator a using push-pull inverter," in 29th Annual Conference of the IEEE Industrial Electronics Society, Vol. 1, pp. 102-107, Nov. 2003.
  5. S. H. Ahn, H. J. Ryoo, J. W. Gong, and S. R. Jang, "Robust design of a solid-state pulsed power modulator based on modular stacking structure," IEEE Transactions on Power Electronics, Vol. 30, No. 5, pp. 2570-2577, May. 2015. https://doi.org/10.1109/TPEL.2014.2352651
  6. H. J. Ryoo, J. S. Kim, G. H. Rim, D. Sytykh, and G. Goussev, "Development of 60 kV, 300 A, 3 kHz pulsed power modulator for wide applications," Acta Physica Polonica-Series A General Physics, Vol. 115, No. 6, pp. 967-970, Jun. 2009.
  7. S. B. Ok, H. J. Ryoo, S. R. Jang, S. K. Ahn, and G. Goussev, "Design of a high-efficiency 40-kV, 150-A, 3-kHz solid-state pulsed power modulator," IEEE Transactions on Plasma Science, Vol. 40, No. 10, pp. 2569-2577, Oct. 2012. https://doi.org/10.1109/TPS.2011.2181426
  8. H. S. Jin, S. H. Song, C. G. Cho, S. M Park, and H. J. Ryoo, "Study of exhaust air treatment from a ship building factory painting facility using pulse plasma technology," IEEE Transactions on Plasma Science, Vol. 46, No. 10, pp. 3552-3556, May. 2018. https://doi.org/10.1109/TPS.2018.2829494
  9. S. R. Jang, H. J. Ryoo, G. Goussev, and G. H. Rim, "Comparative study of MOSFET and IGBT for high repetitive pulsed power modulators," IEEE Transactions on Plasma Science, Vol. 40, No. 10, pp. 2561-2568, Oct. 2012. https://doi.org/10.1109/TPS.2012.2186592
  10. L. Gao, D. Wang, J. Qiu, and K. Liu, "All-solid-state pulse adder with bipolar high voltage fast narrow pulses output," IEEE Transactions on Dielectrics and Electrical Insulation, Vol. 18, No. 3, pp. 775-782, Jun. 2011. https://doi.org/10.1109/TDEI.2011.5931065