Smart Structures and Systems

  • 제25권2호
  • /
  • Pages.255-264
  • /
  • 2020
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Defect classification of refrigerant compressor using variance estimation of the transfer function between pressure pulsation and shell acceleration

  • Kim, Yeon-Woo (Department of Mechanical Engineering, Pusan National University) ;
  • Jeong, Weui-Bong (Department of Mechanical Engineering, Pusan National University)
  • 투고 : 2019.02.28
  • 심사 : 2019.06.20
  • 발행 : 2020.02.25
⟨ 이전 논문 다음 논문 ⟩

초록

This paper deals with a defect classification technique that considers the structural characteristics of a refrigerant compressor. First, the pressure pulsation of the refrigerant flowing in the suction pipe of a normal compressor was measured at the same time as the acceleration of the shell surface, and then the transfer function between the two signals was estimated. Next, the frequency-weighted acceleration signals of the defect classification target compressors were generated using the estimated transfer function. The estimation of the variance of the transfer function is presented to formulate the frequency-weighted acceleration signals. The estimated frequency-weighted accelerations were applied to defect classification using frequency-domain features. Experiments were performed using commercial compressors to verify the technique. The results confirmed that it is possible to perform an effective defect classification of the refrigerant compressor by the shell surface acceleration of the compressor. The proposed method could make it possible to improve the total inspection performance for compressors in a mass-production line.

키워드

참고문헌

  1. Althobiani, F. and Ball, A. (2014), "An approach to fault diagnosis of reciprocating compressor valves using Teager-Kaiser energy operator and deep belief networks", Expert Syst. Applica., 41(9), 4113-4122. https://doi.org/10.1016/j.eswa.2013.12.026
  2. Aretakis, N. and Mathioudakis, K. (1998), "Classification of radial compressor faults using pattern-recognition techniques", Control Eng. Practice, 6(10), 1217-1223. https://doi.org/10.1016/S0967-0661(98)00085-9
  3. Attoui, I., Fergani, N., Boutasseta, N., Oudjani, B. and Deliou, A. (2017), "A new time-frequency method for identification and classification of ball bearing faults", J. Sound Vib., 397, 241-265. https://doi.org/10.1016/j.jsv.2017.02.041
  4. Bendat, J.S. and Piersol, A.G. (1980), Engineering Applications of Correlation and Spectral Analysis, Wiley-Interscience.
  5. Cui, H., Zhang, L., Kang, R. and Lan, X. (2009), "Research on fault diagnosis for reciprocating compressor valve using information entropy and SVM method", J. Loss Prevent. Process Indust., 22(6), 864-867. https://doi.org/10.1016/j.jlp.2009.08.012
  6. Elhaj, M., Gu, F., Ball, A.D., Albarbar, A., Al-Qattan, M. and Naid, A. (2008), "Numerical simulation and experimental study of a two-stage reciprocating compressor for condition monitoring", Mech. Syst. Signal Process., 22(2), 374-389. https://doi.org/10.1016/j.ymssp.2007.08.003
  7. Fan, Y., Nowaczyk, S. and Rognvaldsson, T. (2015), "Evaluation of self-organized approach for predicting compressor faults in a city bus fleet", Procedia Comput. Sci., 53, 447-456. https://doi.org/10.1016/j.procs.2015.07.322
  8. Jung, U. and Koh, B.H. (2014), "Bearing fault detection through multiscale wavelet scalogram-based SPC", Smart Struct. Syst., Int. J., 14(3), 377-395. https://doi.org/10.12989/sss.2014.14.3.377
  9. Kim, Y.W. and Jeong, W.B. (2019), "Modification of acceleration signal to improve classification performance of valve defects in a linear compressor", Smart Struct. Syst., Int. J., 23(1), 71-79. https://doi.org/10.12989/sss.2019.23.1.071
  10. Kim, M. and Kim, M.S. (2005), "Performance investigation of a variable speed vapor compression system for fault detection and diagnosis", Int. J. Refrigeration, 28(4), 481-488. https://doi.org/10.1016/j.ijrefrig.2004.11.008
  11. Lei, Y., He, Z. and Zi, Y. (2008), "A new approach to intelligent fault diagnosis of rotating machinery", Expert Syst. Applicat., 35(4), 1593-1600. https://doi.org/10.1016/j.eswa.2007.08.072
  12. Loukopoulos, P., Zolkiewski, G., Bennett, I., Sampath, S., Pilidis, P., Li, X. and Mba, D. (2019), "Abrupt fault remaining useful life estimation using measurements from a reciprocating compressor valve failure", Mech. Syst. Signal Process., 121, 359-372. https://doi.org/10.1016/j.ymssp.2018.09.033
  13. Mathioudakis, K. and Stamatis, A. (1994), "Compressor fault identification from overall performance data based on adaptive stage stacking", J. Eng. Gas Turbines Power, 116(1), 156-164. https://doi.org/10.1115/1.2906785
  14. Ouadine, A., Mjahed, M., Ayad, H. and El Kari, A. (2018), "Aircraft Air Compressor Bearing Diagnosis Using Discriminant Analysis and Cooperative Genetic Algorithm and Neural Network Approaches", Appl. Sci., 8(11), 2243. https://doi.org/10.3390/app8112243
  15. Pichler, K., Lughofer, E., Pichler, M., Buchegger, T., Klement, E. P. and Huschenbett, M. (2016), "Fault detection in reciprocating compressor valves under varying load conditions", Mech. Syst. Signal Process., 70, 104-119. https://doi.org/10.1016/j.ymssp.2015.09.005
  16. Qi, G., Tsai, W.T., Hong, Y., Wang, W., Hou, G. and Zhu, Z. (2016), "Fault-diagnosis for reciprocating compressors using big data", Proceedings of 2016 IEEE Second International Conference on Big Data Computing Service and Applications, pp. 72-81.
  17. Qi, G., Zhu, Z., Erqinhu, K., Chen, Y., Chai, Y. and Sun, J. (2018), "Fault-diagnosis for reciprocating compressors using big data and machine learning", Simul. Model. Pract. Theory, 80, 104-127. https://doi.org/10.1016/j.simpat.2017.10.005
  18. Shen, C., Wang, D., Liu, Y., Kong, F. and Tse, P.W. (2014), "Recognition of rolling bearing fault patterns and sizes based on two-layer support vector regression machines", Smart Struct. Syst., Int. J., 13(3), 453-471. https://doi.org/10.12989/sss.2014.13.3.453
  19. Shin, K. and Hammond, J. (2008), Fundamentals of Signal Processing for Sound and Vibration Engineers, John Wiley & Sons.
  20. Tran, V.T., AlThobiani, F., Tinga, T., Ball, A. and Niu, G. (2017), "Single and combined fault diagnosis of reciprocating compressor valves using a hybrid deep belief network", Proceedings of the Institution of Mechanical Engineers., Part C: J. Mech. Eng. Sci., 232(20), 3767-3780. https://doi.org/10.1177/0954406217740929
  21. Wang, Y., Xue, C., Jia, X. and Peng, X. (2015), "Fault diagnosis of reciprocating compressor valve with the method integrating acoustic emission signal and simulated valve motion", Mech. Syst. Signal Process., 56, 197-212. https://doi.org/10.1016/j.ymssp.2014.11.002
  22. Yang, B.S., Hwang, W.W., Kim, D.J. and Tan, A.C. (2005), "Condition classification of small reciprocating compressor for refrigerators using artificial neural networks and support vector machines", Mech. Syst. Signal Process., 19(2), 371-390. https://doi.org/10.1016/j.ymssp.2004.06.002
  23. Zhou, Y., Ma, X. and Yuan, Y. (2006), "Reciprocating compressor fault diagnosis based on vibration signal information entropy", Mach. Tool Hydraul., 10, 69.
  24. Zhu, D., Feng, Y., Chen, Q. and Cai, J. (2010), "Image recognition technology in rotating machinery fault diagnosis based on artificial immune", Smart Struct. Syst., Int. J., 6(4), 389-403. https://doi.org/10.12989/sss.2010.6.4.389