한국표면공학회지 (Journal of the Korean institute of surface engineering)

  • 제53권6호
  • /
  • Pages.343-350
  • /
  • 2020
  • /
  • 1225-8024(pISSN)
  • /
  • 2288-8403(eISSN)
한국표면공학회 (The Korean Institute of Surface Engineering)
권호 표지
DOI QR코드

DOI QR Code

H13 공구강의 전처리에 따른 Mo-Cu-N 코팅의 기계적 특성

Mechanical Properties of MoN-Cu Coatings according to Pre-treatment of AISI H13 Tool Steel

  • 박현준 (한국생산기술연구원 열처리그룹) ;
  • 문경일 (한국생산기술연구원 열처리그룹) ;
  • 김상섭 (인하대학교 신소재공학과)
  • Park, Hyun-Jun (Heat Treatment R&D Group, Korea Institute of Industrial Technology) ;
  • Moon, Kyoung-Il (Heat Treatment R&D Group, Korea Institute of Industrial Technology) ;
  • Kim, Sang-Sub (Department of Materials Science and Engineering, Inha University)
  • 투고 : 2020.10.13
  • 심사 : 2020.12.30
  • 발행 : 2020.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The degradation of mechanical properties of nitride coatings to steel substrates is one of the main challenges for industrial applications. In this study, plasma nitriding treatment was used in order to increase the mechanical properties of Mo-Cu-N coating to the H13 tool steel. The nanostructured Mo-Cu-N coating was deposited using pulsed DC magnetron sputtering method with a single alloy Mo-Cu target. Mechanical properties of MoN-Cu coated samples after nitriding were found to be relatively better than non-nitrided MoN-Cu coating.

키워드

참고문헌

  1. Hyun-Jun Park, Kwang-Jin Choi, Jong-Yeob Kim, Seung-Yong Shin, Kyoung-Il Moon, Effect on anti-impact and anti-thermal fatigue properties of STD61 material affected by gas quenching pressure of quenching process, J. of the Korean Society for Heat Treatment, 29 (2016) 277-283. https://doi.org/10.12656/jksht.2016.29.6.277
  2. T. Cselle and A. Barimani, Today's applications and future developments of coatings for drills and rotating cutting tools, Surf. Coat. Technol., 76-77 (1995) 712. https://doi.org/10.1016/02578-9729(68)00119-
  3. M. Urgen, O.L. Eryilmaz, A.F. Cakir, E.S. Kayali, B. Niliifer, Y. ISik, Characterization of molybdenum nitride coatings produced by arc-PVD technique, Surf. Coat. Technol., 201 94-95 (1997) 501-506.
  4. A. Aubert and J. Danroc, Hard chrome and molybdenum coatings produced by physical vapor deposition, Thin Solid Films, 126 (1985) 61-67. https://doi.org/10.1016/0040-6090(85)90175-0
  5. Han-Chan Lee, Kyoung-Il Moon, Paik-Kyun Shin, MoN-Cu Thin Films Deposited by Magnetron Sputtering with Single Alloying Target, J. Korean Inst. Surf. Eng., 49 (2016) 368-375. https://doi.org/10.5695/JKISE.2016.49.4.368
  6. M.K. Kazmanli, M. Urgen, A.F. Cakir, Effect of nitrogen pressure, bias, voltage and substrate temperature on the phase structure of Mo-N coatings produced by cathodic arc PVD, Surf. Coat. Technol., 167 (2003) 77-82. https://doi.org/10.1016/S0257-8972(02)00866-6
  7. A. Leyland, A. Matthews, Design criteria for wear-resistant nanostructured and glassy-metal coatings, Surf. Coat. Technol., 177-178 (2004) 317-324. https://doi.org/10.1016/j.surfcoat.2003.09.011
  8. S. Ma, K. Xu, W. Jie, Plasma nitride and TiCN coated AISI H13 steel by pulsed dc PECVD and its application for hot-working dies, Surf. Coatings Technol., 191 (2005) 201-205. https://doi.org/10.1016/j.surfcoat.2004.03.048
  9. S.M.M. Shafiei, M. Divandari, S.M.A. Boutorabi, R. Naghizadeh, Characterization of TiCN thin films deposited by Dc-Pulsed PACVD using methane precursor, Mater. Res., 17 (2014) 1651-1657. https://doi.org/10.1590/1516-1439.309514
  10. S. Guruvenket, D. Li, J.E. Klemberg-Sapieha, L. Martinu, J. Szpunar, Mechanical and tribological properties of duplex treated TiN, nc-TiN, nc-TiN/a-SiN x and nc-TiCN/a-SiCN coatings deposited on 410 low alloy stainless steel, Surf. Coatings Technol., 203 (2009) 2905-2911. https://doi.org/10.1016/j.surfcoat.2009.03.009
  11. 이한찬, 단일 합금 타겟을 이용한 마그네트론 스퍼터링법으로 제작된 Mo-Cu 나노박막의 특성에 관한 연구, 인하대학교 석사학위 논문(2012).
  12. Verein Deutscher Ingenieure Normen, VDI 3198, VDI-Verlag, Dusseldorf, 1991.
  13. Kyun Taek Cho, Kyung Song, Sang Ho Oh, Young-Kook Lee, Won Beom Lee, Surface hardening of shot peened H13 steel by enhanced nitrogen diffusion, Surf. Coatings Technol., 232 (2013) 912-919. https://doi.org/10.1016/j.surfcoat.2013.06.123
  14. Soobyn Kim, Hae-Won Yoon, Han-Chan Lee, KyoungIl Moon, Hyun Seon Hong, Effects of Cu addition on microstructural and mechanical properties of Mo-Cu-N coatings, J. Korean Inst. Surf. Eng., 52 (2019) 227-232.
  15. A.daS. Rocha, T. Strohaecker, T. Hirsch, Effect of different surface states before plasma nitriding on properties and machining behavior of M2 high-speed steel, Surf. Coatings Technol., 165 (2003) 176-185. https://doi.org/10.1016/S0257-8972(02)00768-5
  16. Xing Xu, Fenghua Su, Zhujun Li, Microstructure and tribological behaviors of MoN-Cu nanocomposite coatings sliding against Si3H4 ball under dry and oil-lubricated conditions, Wear, 434-435 (2019) 202994. https://doi.org/10.1016/j.wear.2019.202994
  17. N. Vidakis, A. Antoniadis, N. Bilalis, The VDI 3198 indentation test evaluation of a reliable qualitative control for layered compounds, J. Mater. Pro. Technol. 143-144 (2003) 481-485. https://doi.org/10.1016/S0924-0136(03)00300-5