초록
국내 건축 구조물 방수재료 중 하나인 수용성 고무 아스팔트계 도막 방수재는 주로 실내(화장실, 주방, 배란다 등)에 많이 사용되고 있다. 일반적으로 아스팔트계열의 재료는 검은색의 기본 채도를 벗어나지 못하여 노출용보다는 비노출용으로 많이 쓰이고 있으며, 수용성 고무 아스팔트계 도막방수재의 경우는 기본적으로 낮은 물성 때문에 실내로 한정하여 적용하고 있다. 이에 인장 및 신장성 향상을 위하여 실란커플링제와 무기필러, 프로세서 오일 넣어 물성을 향상시켰고, 이에 따라 실외 도막방 수재 품질기준과의 기초 물성을 분석하였다. 그 결과 노출용 품질기준과 비교한 수용성 고무 아스팔트 도막방수재는 시험 평가가 진행된 전 항목에서 실리콘 고무계의 기본 물성 품질기준을 상회하는 결과가 나타났으나, 우레탄 고무계 1류의 인장강도 및 인열강도 클로로프렌 고무계 인열강도 품질기준 대비 성능이 약 34.2%에서 약 40.8% 정도 부족한 것으로 나타났다.
Water-soluble rubber asphalt-based waterproofing material, which is one of the waterproofing materials for building structures, is mainly used indoors (toilet, kitchen, balcony, etc.). In general, asphalt-based materials are used for non-exposed installation, rather than as exposed type as they do not deviate from their usual basic black pigmentation, and water-soluble rubber asphalt-based coating waterproofing materials are basically limited to indoors because of their low physical properties. Accordingly, in order to improve the tensile and elongation properties, a silane coupling agent, an inorganic filler, and a processor oil w ere added to improve the physical properties, and accordingly, the basic physical properties of the outdoor coating waterproofing material quality standard were analyzed. As a result, the water-soluble rubber asphalt coating waterproofing material compared with the exposure quality standard showed a result that exceeded the basic physical property quality standard of silicone rubber in all items under test evaluation, but the tensile strength and tear strength of the first class of urethane rubber were chloroprene. It was found that the performance compared to the quality standards of rubber-based tear strength was about 34.2% to about 40.8%.