농업과학연구 (Korean Journal of Agricultural Science)

  • 제47권4호
  • /
  • Pages.1123-1134
  • /
  • 2020
  • /
  • 2466-2402(pISSN)
  • /
  • 2466-2410(eISSN)
충남대학교 농업과학연구소 (Institute of Agricultural Science, CNU)
권호 표지
DOI QR코드

DOI QR Code

Development of an accelerated life test procedure considering the integrated equivalent load of an implement working pump for an agricultural tractor

  • Moon, Seok-Pyo (Department of Biosystems Machinery Engineering, Chungnam National University) ;
  • Baek, Seung-Min (Department of Smart Agriculture Systems, Chungnam National University) ;
  • Chung, Sun-Ok (Department of Biosystems Machinery Engineering, Chungnam National University) ;
  • Park, Young-Jun (Department of Biosystems & Biomaterials Science and Engineering, Seoul National University) ;
  • Han, Tae-Ho (Agricultural Machinery Certification Team, Foundation of Agriculture. Tech, Commercialization & Transfer) ;
  • Kim, Yong-Joo (Department of Biosystems Machinery Engineering, Chungnam National University)
  • 투고 : 2020.09.18
  • 심사 : 2020.11.30
  • 발행 : 2020.12.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The goal of this study was to develop an accelerated life test for an implement working pump for an agricultural tractor. The field experiments were conducted to measure the load of an implement working pump during major agricultural operations such as plow tillage, rotary tillage, baler operations, and wrapping operations. The measurement system for an implement working pump load was constructed using a pressure sensor, the engine rotational speed, and the hitch pump displacement. The measured implement working pump load was calculated as an equivalent load for each agricultural operation using the Palmgren-Miner rule, which is a cumulative damage method. The equivalent load was calculated using the total load data and peak load data when the total data included the operation of an implement working. The annual usage time of the agricultural tractor was applied to develop two integrated equivalent loads. The acceleration factor was calculated to develop an accelerated life test and was calculated from the two integrated equivalent loads, the maximum pressure, and the flow rate conditions of the hitch pump. In Korea, the warranty life of a tractor is 2,736 hours, and the time required for the test to guarantee the operational life of tractors was calculated as 7,561 hours. The acceleration factors were calculated as 453.6 and 38.3, respectively, from the total load data and peak load data. The fatigue test time can be shortened by 16.7 and 197.4 hours according to the result of the acceleration factors.

키워드

참고문헌

  1. Baek SM, Kim WS, Kim YS, Lee NG, Kim NH, Kim YG. 2020. Analysis of the load distribution and contact safety factor of PTO gears of a 71 kW class agricultural tractor. Korean Journal of Agricultural Science 47:327-335. [in Korean] https://doi.org/10.7744/KJOAS.20200023
  2. Jung DS, Kim DS. 2010. Reliability evaluation method for hydraulic pump. Journal of Drive and Control 7:16-21. [in Korean]
  3. Jung DS, Kim DS, Lee YB. 2012. Reliability evaluation technique for the main pump of excavator. Journal of Drive and Control 9:88-96. [in Korean]
  4. Jung DS, Lee YB, Kang BS. 2018. Study for the reliability evaluation of a volute pump. Journal of Drive and Control 15:23-29. [in Korean] https://doi.org/10.7839/KSFC.2018.15.4.023
  5. KAMICO (Korea Agricultural Machinery Industry Cooperation), KSAM (Korean Society for Agricultural Machinery). 2017. Agricultural machinery yearbook Republic of Korea. Korea Agricultural Machinery, Cheonan, Korea. [in Korean]
  6. Kim DH, Lee SH, Lim JH. 2015. Reliability analysis of multi-state UH-60 helicopter hydraulic pump system with a multifunctional standby component. Journal of the Applied Reliability 15:233-240 [in Korean]
  7. Kim WS, Kim YS, Kim TJ, Park SU, Choi Y, Choi IS, Kim YK, Kim YJ. 2019. Analysis of power requirement of 78 kW class agricultural tractor according to major field operation. Transactions of the Korean Society of Mechanical Engineers - A 43:911-922. [in Korean] https://doi.org/10.3795/ksme-a.2019.43.12.911
  8. Kim YJ, Chung SO, Choi CH, Lee DH. 2011a. Evaluation of tractor PTO severness during rotary tillage operation. Journal of Biosystems Engineering 36:163-170. [in Korean] https://doi.org/10.5307/JBE.2011.36.3.163
  9. Kim YJ, Chung SO, Park SJ, Choi CH. 2011b. Analysis of power requirement of agricultural tractor by major field operation. Journal of Biosystems Engineering 36:79-88. [in Korean] https://doi.org/10.5307/JBE.2011.36.2.79
  10. Lee DH. 2011. Analysis of power requirements of tractor for field operation. Master Dissertation, Sungkyunkwan Univ., Suwon, Korea. [in Korean]
  11. Lee SU. 2018. A study on control algorithm of independent metering valve and hydraulic pump for improving the working efficiency of excavator. Master dissertation, Sungkyunkwan Univ., Suwon, Korea. [in Korean]
  12. Lee YB, Kim HE, Yoo YC, Park JH. 2005. Accelerated life test model for life prediction of piston assemblies in hydraulic pump and motor. Journal of Drive and Control 2:14-22. [in Korean]
  13. Lim SJ, Kwon HJ, Kang YS, Lee PU, Kim TJ, Kim YJ, Kim YS. 2019. Power analysis of a 3-kW class motor-driven multipurpose walking-type transplanter. Journal of Biosystem Engineering 44:135-145. https://doi.org/10.1007/s42853-019-00016-y
  14. Miner MA. 1945. Cumulative damage in fatigue. Journal of Applied Mechanics 12:159-164. [in Korean] https://doi.org/10.1115/1.4009458
  15. Nelson W. 1990. Accelerated testing: Statical models, test plans, and data analysis. Wiley, New York, USA.
  16. Reliability assessment center of KIMM. 2008. Gear pumps for agricultural machinery Korea agency for technology and standards. RS-B-0063:2008. [in Korean]
  17. Shin SY, Kang CH, Yu SC, Kim BG, Kim YY, Kim JO. 2015. A study on the distribution and post management for agricultural mechanization. Rural Development Administration, Jeonju, Korea. [in Korean]