Acknowledgement
This paper has been supported by a grant from 2019 Academic Research Fund of Andong National University.
References
- ANSYS, Inc. (2020), Engineering Simulation & 3D Design Software; Ansys Inc., Canonsburg, Pennsylvania, https://www.ansys.com
- Bai, Z. (2002), "Krylov subspace techniques for reduced-order modeling of large-scale dynamical systems", Appl. Numer. Math., 43, 9-44. https://doi.org/10.1016/S0168-9274(02)00116-2.
- Bamer, F., Amiri, A.K. and Bucher, C. (2017), "A new model order reduction strategy adapted to nonlinear problems in earthquake engineering", Earthq. Eng. Struct. Dyn., 46, 537-559. https://doi.org/10.1002/eqe.2802.
- Chen, H., Tan, P., Ma, H. and Zhou, F. (2017), "Response spectrum analysis considering non-classical damping in the base-isolated benchmark building", Struct. Eng. Mech., 64(4), 473-485. https://doi.org/10.12989/sem.2017.64.4.473.
- Corigliano, A. Dossi, M. and Mariani, S. (2015), "Model Order Reduction and domain decomposition strategies for the solution of the dynamic elastic-plastic structural problem", Comput. Methods Appl. Mech. Engrg. 290, 127-155. https://doi.org/10.1016/j.cma.2015.02.021.
- Cornwell, R.E., Craig, R.R. and Johnson, C.P. (1983), "On the application of the mode acceleration method to structural engineering problems", Earthq. Eng. Struct. Dyn., 11(5), 679-688. https://doi.org/10.1002/eqe.4290110507.
- Craig, R.R. (1981), Structural Dynamics-An Introduction to Computer Methods, John Wiley, New York, USA.
- Freund, R.W. (2000), "Krylov-subspace methods for reducedorder modeling in circuit simulation", J. Comput. Appl. Math., 123, 395-421. https://doi.org/10.1016/S0377-0427(00)00396-4.
- Han, J.S., Rudnyi, E.B. and Korvink, J.G. (2005), "Efficient optimization of transient dynamic problems in MEMS devices using model order reduction", J. Micromech. Microeng., 15(4), 822-832. https://doi.org/10.1088/0960-1317/15/4/021.
- Han, J.S. (2012), "Efficient frequency response and its direct sensitivity analyses for large-size finite element models using Krylov subspace-based model order reduction", J. Mech. Sci. Tech., 26(4), 1115-1126. https://doi.org/10.1007/s12206-012-0227-8.
- Han, J.S. (2013), "Calculation of design sensitivity for large-size transient dynamic problems using Krylov subspace-based model order reduction", J. Mech. Sci. Tech., 27(9), 2789-2800. https://doi.org/10.1007/s12206-013-0726-2.
- Han, J.S. (2014), "Krylov subspace-based model order reduction for Campbell diagram analysis of large-scale rotordynamic systems", Struct. Eng. Mech., 50(1), 19-36. https://doi.org/10.12989/sem.2014.50.1.019.
- Han, J.S., Won, B., Park, W.S. and Ko, J.H. (2016), "Transient response analysis by model order reduction of a Mokpo-Jeju submerged floating tunnel under seismic excitations", Struct. Eng. Mech., 57(5), 921-936. https://doi.org/10.12989/sem.2016.57.5.921.
- Jayalekshmi, B.R. and Chinmayi, H.K. (2016), "Seismic analysis of shear wall buildings incorporating site specific ground response", Struct. Eng. Mech., 60(3), 433-453. https://doi.org/10.12989/sem.2016.60.3.433.
- Jiang, H., Lu, X. and Zhu, J. (2012), "Performance-based seismic analysis and design of code-exceeding tall buildings in Mainland China", Struct. Eng. Mech., 43(4), 545-560. https://doi.org/10.12989/sem.2012.43.4.545.
- Kline, K.A. (1986), "Dynamic analysis using a reduced basis of exact modes and Ritz vectors", AIAA J., 24(12), 2022-2029. https://doi.org/10.2514/3.9562.
- Ko, J.H., Byun, D. and Han, J.S. (2009), "An efficient numerical solution for frequency response function of micromechanical resonator arrays", J. Mech. Sci. Tech., 23, 2694-2702. https://doi.org/10.1007/s12206-009-0721-9.
- Li, J.H. and Li, J. (2005), "A response spectrum method for seismic response analysis of structures under multi-support excitations", Struct. Eng. Mech., 21(3), 255-273. https://doi.org/10.12989/sem.2005.21.3.255.
- Qu, Z.Q. (2004), Model Order Reduction Techniques: With Application in Finite Element Analysis, Springer-Verlag, London, United Kingdom.
- Rudnyi, E. and Korvink, J. (2006), "Model order reduction for large scale engineering models developed in ANSYS", Lecture Note. Comput. Sci., 3732, 349-356. https://doi.org/10.1007/11558958_41.
- Taranath, B.S. (2005), Wind and Earthquake Resistant Buildings: Structural Analysis and Design, Marcel Dekker, New York, USA.
- The MathWorks, Inc. (2020), https://kr.mathworks.com
- Vibrationdata (2020), Welcome to Vibrationdata El Centro Earthquake Page; Vibrationdata http://www.vibrationdata.com/elcentro.htm
- Wikipedia (2016), 2016 Gyeongju earthquake, https://en.wikipedia.org/wiki/2016_Gyeongju_earthquake
- Wikipedia (2017), 2017 Pohang earthquake, https://en.wikipedia.org/wiki/2017_Pohang_earthquake
- Wikipedia (2019), Fox Plaza (Los Angeles), https://en.wikipedia.org/wiki/Fox_Plaza_(Los_Angeles)
- Wilson, E.L., Yuan, M.W. and Dickens, J.M. (1982), "Dynamic analysis by direct superposition of Ritz vectors", Earthq. Eng. Struct. Dyn., 10, 813-821. https://doi.org/10.1002/eqe.4290100606.
Cited by
- Flow-based seismic resilience assessment of urban water transmission networks vol.79, pp.4, 2020, https://doi.org/10.12989/sem.2021.79.4.517