인출력 저감을 통한 SSD Test Gender의 장수명 설계

Long Life Design of SSD Test Gender by Reducing Ejecting Force

  • 김재경 (공주대학교 생산기술연구소) ;
  • 박형석 ((주)마이크로컨택솔루션) ;
  • 이기석 (공주대학교 기계자동차공학부) ;
  • 전의식 (공주대학교 생산기술연구소)
  • Kim, Jae Kyung (Industrial Technology Research Institute, Kongju National University) ;
  • Park, Hyung Suk (Micro Contact Solution Co., LTD) ;
  • Lee, Ki Seok (Division of Mechanical & Automotive Engineering, Kongju National University) ;
  • Jeon, Euy sik (Industrial Technology Research Institute, Kongju National University)
  • 투고 : 2020.12.21
  • 심사 : 2020.12.23
  • 발행 : 2020.12.31

초록

Recently, the electronic equipment industry has become active due to the continuous increase in portable storage media with high-speed information communication, and in particular, the production of SSD(Solid State Drives) for miniaturization of mobile devices and high-speed information communication has increased rapidly. When the SSD is ejecting in the SSD test gender, the necessary ejecting force must be kept constant to have a lifespan applicable to the test device. When the ejecting force increased, it leads to wear of the link for ejecting, which causes a problem in that repeated durability decreases and the ejecting of the SSD becomes impossible. In this paper, the repeated durability test analysis according to the material and the reducing ejecting force design were performed to increase the life of the test gender for SSD inspection. The wear level of the pusher head and ejector was analyzed through repeated durability tests according to the material of the pusher head. The validity of the design was verified through the ejecting force test and repeated durability test of the Test gender, which was designed by carrying out the design to reduce the size and ejecting force of the test gender.

키워드

참고문헌

  1. Su-Kyung Yoon and Jeong Eun Nah, "Hybrid Memory Adaptor for OpenStack Swift Object Storage", Journal of the Semiconductor & Display Technology, Vol 19, No.3, pp 61-67, 2020.
  2. Jin-Woo Kim, Sun-Ho Ha, Sang-Jin Kim, Chang-Uk Kim, Jung-Il Song, "Structural analysis and wearability evaluation of a vehicle's swash plate A/C compressor", Journal of the Korean Society of Manufacturing Process Engineers, Vol 12, No.5, pp 109-115, 2013. https://doi.org/10.14775/ksmpe.2013.12.6.109
  3. Jeon G. Han, Keun Song, Jin Y. Park, "The study on the change of wear resistance of STD11 steel by nitrogen implantation", Applied Science and Convergence Technology, Vol 3, No.4, pp 449-456, 1994.
  4. Keun-Kuk Choi, Man-Hyung Lee, Dong Hyun Kim, Tae Young Ahn, "An Optimal Design Study of an Equilibrating-Mechanism for the Unbalanced Elevation-Drive System", Journal of Institute of Control, Robotics and Systems, Vol 6, No.11, pp1033-1038, 2011.
  5. Ju-Yong Choi, Sang-In Eom, Jung-Hyun Kim, "Optimal Design for Parallelogram Type Flexure Hinge", Journal of the Korean Society for Precision Engineering, Vol 32, No.1, pp 107-111, 2015. https://doi.org/10.7736/KSPE.2015.32.1.107
  6. Bong-Suk Kim, Seong-Min Lee, Soo-Hun Lee, Jun-Yeob Song, Chang-Woo Lee, "Effect of Scale-down of Structure on Dynamic Characteristic Parameters in Bolted-Joint Beams", Journal of the Korean Society for Precision Engineering, Vol 24, No.3, pp 108-116, 2007.
  7. Hyun-Kyung Cha, Jin-Seok Jang, Wan-Suk Yoo, Jeong-Hyun Sohn, "Optimum Design of Latch Position and Latch Length on Operating Mechanism of a Circuit Breaker using ADAMS and VisualDOC", Transactions of the Korean Society of Mechanical Engineers, Vol 38, No. 11, pp 1215-1220, 2014. https://doi.org/10.3795/KSME-A.2014.38.11.1215
  8. Kyung-nam Kim, Yoo-jeong Noh, Dong-hoon Kim, "Optimization of Base Plates and Contact Switches in Trunk Latches", Transaction of the Korean Society of Automotive Engineers, Vol 22, No.3, pp 97-104, 2014. https://doi.org/10.7467/KSAE.2014.22.3.097
  9. Myung Sik Kim, Jin Won Hong and Kyoo Sik Bae, "Effects of PTFE and W Addition on the Anti-Wear Properties of Ni-P Coatings", JSDT, Vol 6, No.2, pp 25-28, 2007.