Design & Manufacturing

Korean Society of Die & Mold Engineering (한국금형공학회)
권호 표지

Hinge Design and Injection Molding Simulation of Cosmetic Cushion Fact Container Using Eco-Friendly Materials

친환경 소재를 이용한 화장품 쿠션 팩트 용기의 힌지 설계와 사출 성형 시뮬레이션

  • Received : 2019.09.10
  • Accepted : 2019.09.30
  • Published : 2019.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

As the consumer market in the cosmetic, vehicle manufacturing and aerospace industries grows, the demand for manufacturing industries using on injection mold technology. Also, such manufacturing technology of metal machining is expensive, and the shape is limited. Cosmetic cushion fact products are divided into outer relevant to the exterior of the product and inner containers containing the actual contents. In the case of the inner container, it needs to be combined with the upper and lower cases. As environmental regulations are strengthened internationally, the use of a large number of component parts can result in significant losses in recycling and economics. Therefore, this study aims to perform injection molding analysis through injection molding simulation to develop a cushion fact container that can be recycled through the unification of products and materials using polypropylene to cope with environmental regulations. In the case of injection molding conditions, Injection Time(sec): 4.5, Cooling Time(sec): 13, Resin Temperature($^{\circ}C$): 240, and Pressure(MPa): 30 were determined. The results of injection molding simulation according to the two design methods were compared with the sync mark which shows the problem of filling and injection molding.

Keywords

References

  1. Eun Min Park, Sun Kyoung Kim. "Effects of Mold Heat Transfer Coefficient on Numerical Simulation of Injection Molding", Transactions of the Korean Society of Mechanical Engineers - B, Vol. 43, No.3, pp. 201-209, 2019. https://doi.org/10.3795/ksme-b.2019.43.3.201
  2. Jin-Woo Jung, Nam-Hoon Chang, Hyun-Joong Lee, Keun Park., "A Study on Embedded Heating Structure for Plastic Metal Hybrid Molding", Transactions of the Korean Society of Mechanical Engineers - A, Vol.43, No.2, pp. 145-152. 2019. https://doi.org/10.3795/ksme-a.2019.43.2.145
  3. Ho Jin Lee, Dong Gyu Ahn, Sang Hun Lee, Jun Chul Ki, Jae Hong Ko., "Three-Dimensional Thermoforming Analysis of an Inner Case with Three Cavities for Refrigerator", Transactions of the Korean Society of Mechanical Engineers - A, Vol. 40, No.5, pp. 505-511. 2016. https://doi.org/10.3795/KSME-A.2016.40.5.505
  4. Sung Hyun Shin, Eui Chul Jeong, Mi Ae Kim, Jung Eon Son, Sung Yoon Kim, Kyung Hwan Yoon, Sung Hee Lee, "A Study on The Thickness Shrinkage of Injection Molded Parts with The Variation of Injection Mold Core and Molding Materials", Korea Society of Die & Mold Engineering, Vol.13, No.2, pp. 17-21. 2019.
  5. Sung Taek Jung, Seong Hyun Kim, Hyun Jeong Kim, Jeong, Joong Bae Lee, Seung Yub Baek, "An analysis on the injection mold simulation of single cushion pact cosmetic container for the friendly-environment and high productivity", Korea Society of Die & Mold Engineering, Vol.12, No.2, pp. 51-56. 2018.
  6. Dong Gyu Ahn, Min Woo Park, Jeong Woo Park, Hyung Su Kim., "Determination of Molding Conditions of Double-Shot Injection Mold for the Computer Mouse via Three-Dimensional Injection Molding Analysis", Transactions of the Korean Society of Mechanical Engineers - A, Vol.35 No.12, pp. 1619-1625. 2011. https://doi.org/10.3795/KSME-A.2011.35.12.1619
  7. Dong-Gyu Ahn, Min-Woo Park, Hyung-Soo Kim., " A Study on the Design of Cooling Channels of Injection Mould to Manufacture a Flat Part with a Partly Thick Volume", Journal of the Korean Society for Precision Engineering, Vol.29, No.8, pp. 825-834. 2012.
  8. Hakimian, E., and Sulong, A. B., "Analysis of warpage and shrinkage properties of injection-molded micro gears polymer composites using numerical simulations assisted by the Taguchi method", Materials & Design, Vol.42, pp. 62-71. 2012. https://doi.org/10.1016/j.matdes.2012.04.058
  9. Liu, Y., and Gehde, M., "Evaluation of heat transfer coefficient between polymer and cavity wall for improving cooling and crystallinity results in injection molding simulation", Applied Thermal Engineering, Vol.80, pp. 238-246. 2015. https://doi.org/10.1016/j.applthermaleng.2015.01.064
  10. Zink, B., and Kovacs, J. G., "The effect of limescale on heat transfer in injection molding", International Communications in Heat and Mass Transfer, Vol.86, pp. 101-107. 2017. https://doi.org/10.1016/j.icheatmasstransfer.2017.05.018