한국구조물진단유지관리공학회 논문집 (Journal of the Korea institute for structural maintenance and inspection)

  • 제23권3호
  • /
  • Pages.111-118
  • /
  • 2019
  • /
  • 2234-6937(pISSN)
  • /
  • 2287-6979(eISSN)
한국구조물진단유지관리공학회 (Korea Institute for Structural Maintenance Inspection)
권호 표지
DOI QR코드

DOI QR Code

비정질강섬유를 혼입한 초고강도콘크리트의 폭렬특성에 관한 실험적 연구

Experimental Study on the Spalling Properties of Ultra High Strength Concrete containing Amorphous Metallic Fiber

  • 최경철 (충남대학교 사회기반시설기술연구소) ;
  • 김규용 (충남대학교 건축공학과) ;
  • 김홍섭 (동경대학 대학원공학계연구과 건축재료연구실) ;
  • 황의철 (충남대학교 사회기반시설기술연구소) ;
  • 남정수 (충남대학교 건축공학과)
  • 투고 : 2019.02.27
  • 심사 : 2019.04.05
  • 발행 : 2019.05.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 연구에서는 비정질강섬유의 혼입이 초고강도콘크리트의 폭렬특성에 미치는 영향이 실험적으로 검토되었다. 콘크리트는 압축강도 100과 150 MPa의 초고강도콘크리트가 사용되었다. 폴리프로필렌섬유는 0.15 vol%, 비정질강섬유는 0.3 및 0.5 vol%가 혼입되었다. 시험체는 콘크리트의 압축강도와 섬유혼입 조건에 따라 6수준이 제작되었고, ISO-834 가열곡선에 의해 가열되었다. 결과로써 폴리프로필렌섬유와 비정질강섬유가 혼입된 초고강도콘크리트의 폭렬제어에 있어서는 용융된 폴리프로필렌섬유가 형성하는 공극네트워크를 통해 수증기가 이동하는 효과가 지배적인 것으로 나타났다. 또한, 비정질강섬유 0.3v ol% 혼입률에서는 폭렬제어에 큰 영향을 미치지 않지만, 0.5 vol%의 비정질강섬유가 혼입될 경우에는 수증기가 이동할 수 있는 균열의 발생이 억제됨으로써 콘크리트 폭렬의 원인으로 지적되고 있는 수분막힘층(moisture clog)가 형성될 가능성이 높은 것을 확인할 수 있었다.

This study examined the effect of amorphous metallic (AM) fibers on the spalling properties of ultra high strength concrete. Six specimens with concrete strengths of 100 MPa and 150 MPa were evaluated with mix proportions of polypropylene (PP) fibers of 0.15% by concrete volume, and proportions of AM fibers of 0.3% and 0.5% by concrete volume. These specimens were then heated in accordance with the ISO-834 heating curve. The movement of water vapor through a pore network formed by molten PP fibers was found to be a dominant factor controlling the spalling of high-strength concrete. Spalling control was not found to be significantly affected by the addition of 0.3% AM fibers; however, when 0.5% AM fibers was added, cracking was limited and so were paths for water vapor migration, increasing the likelihood of a moisture clog and creating the differential internal pressure often blamed for concrete spalling.

키워드

참고문헌

  1. Kimura, H., Ishikawa, Y., Kambayashi, A., &Takatsu, H. (2007). Seismic behavior of 200 MPa ultra-high-strength steel-fiber reinforced concrete columns under varying axial load. Journal of advanced concrete technology , 5 (2), 193-200. https://doi.org/10.3151/jact.5.193
  2. Kalifa, P., Menneteau, F. D., &Quenard, D. (2000). Spalling and pore pressure in HPC at high temperatures. Cement and concrete research, 30 (12), 1915-1927. https://doi.org/10.1016/S0008-8846(00)00384-7
  3. Kodur, V. K. R. (2000). Spalling in high strength concrete exposed to fire: concerns, causes, critical parameters and cures. In Advanced Technology in Structural Engineering (pp. 1-9).
  4. Choe, G., Kim, G., Gucunski, N., & Lee, S. (2015). Evaluation of the mechanical properties of 200 MPa ultra-high-strength concrete at elevated temperatures and residual strength of column. Construction and Building Materials, 86, 159-168. https://doi.org/10.1016/j.conbuildmat.2015.03.074
  5. Zeiml, M., Leithner, D., Lackner, R., & Mang, H. A. (2006). How do polypropylene fibers improve the spalling behavior of in-situ concrete?. Cement and concrete research, 36(5), 929-942. https://doi.org/10.1016/j.cemconres.2005.12.018
  6. Dancygier Avraham N, Katz Amnon, Benamou David, Yankelevsky David Z. Resistance of double-layer reinforced HPC barriers to projectile impact. Int J Impact Eng 2014;67:39-51 https://doi.org/10.1016/j.ijimpeng.2014.01.001
  7. Kanda T, Li Victor C. Interface property and apparent strength of high strength hydrophilic fiber in cement matrix. J Mater Civ Eng 1998;10:5-13. https://doi.org/10.1061/(ASCE)0899-1561(1998)10:1(5)
  8. Bolat H, Simsek O, Cullu M, Durmus G, Can O. The effects of macro synthetic fiber reinforcement use on physical and mechanical properties of concrete. Compos Part B: Eng 2014;61:191-8. https://doi.org/10.1016/j.compositesb.2014.01.043
  9. Bencardino F, Rizzuti L, Spadea G, Swamy RN. Implications of test methodology on post-cracking and fracture behaviour of steel fibre reinforced concrete. Compos Part B: Eng 2013;46:31-8. https://doi.org/10.1016/j.compositesb.2012.10.016
  10. Peng, G. F., Yang, W. W., Zhao, J., Liu, Y. F., Bian, S. H., & Zhao, L. H. (2006). Explosive spalling and residual mechanical properties of fiber-toughened high-performance concrete subjected to high temperatures. Cement and Concrete Research, 36(4), 723-727. https://doi.org/10.1016/j.cemconres.2005.12.014
  11. Ding, Y., Zhang, C., Cao, M., Zhang, Y., & Azevedo, C. (2016). Influence of different fibers on the change of pore pressure of self-consolidating concrete exposed to fire. Construction and Building Materials, 113, 456-469. https://doi.org/10.1016/j.conbuildmat.2016.03.070
  12. Choi, S. J., Hong, B. T., Lee, S. J., & Won, J. P. (2014). Shrinkage and corrosion resistance of amorphous metallic-fiber-reinforced cement composites. Composite Structures, 107, 537-543. https://doi.org/10.1016/j.compstruct.2013.08.010
  13. Yang, J. M., Shin, H. O., & Yoo, D. Y. (2017). Benefits of using amorphous metallic fibers in concrete pavement for long-term performance. Archives of Civil and Mechanical Engineering, 17(4), 750-760. https://doi.org/10.1016/j.acme.2017.02.010
  14. Yoo, D. Y., Banthia, N., Yang, J. M., & Yoon, Y. S. (2016). Size effect in normal-and high-strength amorphous metallic and steel fiber reinforced concrete beams. Construction and Building Materials, 121, 676-685. https://doi.org/10.1016/j.conbuildmat.2016.06.040
  15. Choe, G., Kim, G., Yoon, M., Hwang, E., Nam, J., & Guncunski, N. (2019). Effect of moisture migration and water vapor pressure build-up with the heating rate on concrete spalling type. Cement and Concrete Research, 116, 1-10. https://doi.org/10.1016/j.cemconres.2018.10.021
  16. Gao, J., Sun, W., & Morino, K. (1997). Mechanical properties of steel fiber-reinforced, high-strength, lightweight concrete. Cement and Concrete Composites, 19(4), 307-313. https://doi.org/10.1016/S0958-9465(97)00023-1
  17. M.R. Bangi, T. Horiguchi, Effect of fibre type and geometry on maximum pore pressures in fibre-reinforced high-strength concrete at elevated temperatures, Cem. Concr. Res. 42(2) (2012) 459-466 https://doi.org/10.1016/j.cemconres.2011.11.014