References
- Greenhouse Gas Inventory and Reseerch Center, "2018 National Gerenhouse Gas Inventory report of Korea", 2018, p. 39. Retrieved from http://www.gir.go.kr/home/board/read.do?pagerOffset=0&maxPageItems=10&maxIndexPages=10&searchKey=&searchValue=&menuId=36&boardId=43&boardMasterId=2&boardCategoryId=.
- T. H. Lim, J. I. Byun, M. S. Cho, and H. S. Kim, "Design and Structural Analysis of Type 4 Composite Pressure Vessel Fitted in Spare Tire Well", Trans. of the Korean Hydrogen and New Energy Society, Vol. 29, No. 6, 2018, pp. 570-577, doi: https://doi.org/10.7316/KHNES.2018.29.6.570.
- H. G. Gang, J. S. Park, C. U. Kim, D. H. Gang, C. S. Hong, and C. G. Kim, "Papers ; Behavior Analysis and Strain Measurement of Filament Wound Composite Tank Part 2. Strain Measurement Using Fiber Optic Sensors", Journal of the Korean Society for Aeronautical & Space Sciences, Vol. 29, No. 8, 2001, pp. 96-102. Retrieved from http://www.koreascience.or.kr/article/JAKO200110102462930.page.
-
B. Lee, H. Lee, C. Moon, S. Moon, and H. Lim, "Preliminary Economic Analysis for
$H_2$ Transportation Using Liquid Organic H2 Carrier to Enter$H_2$ Economy Society in Korea", Trans. of the Korean Hydrogen and New Energy Society, Vol. 30, No. 2, 2019, pp. 119-127, doi: https://doi.org/10.7316/KHNES.2019.30.2.119. -
C. N. Park, "Volume Expansion of
$TiMn_2$ -type Hydrogen Storage Alloy with Hydrogenation", Trans. of the Korean Hydrogen and New Energy Society, Vol. 28, No. 5, 2017, pp. 459-464, doi: https://doi.org/10.7316/KHNES.2017.28.5.459. - Y. Bae, C. Hwang, J. Kim, X. L. Dong, S. Kim, and Y. G. Jung, "Formation and Hydrogen Absorption Properties of Intermetallic Mg-Ni Compound Nanoparticles", Trans. of the Korean Hydrogen and New Energy Society, Vol. 28, No. 3, 2017, pp. 238-245, doi: https://doi.org/10.7316/KHNES.2017.28.3.238.
- P. Preuster, A. Alekseev, and P. Wasserscheid, "Hydrogen storage technologies for future energy systems", Ann. Rev. Chem. Biomol. Eng., Vol. 8, 2017, pp. 445-471, doi: https://doi.org/10.1146/annurev-chembioeng-060816-101334.
- F. W. DuVall, "Cost comparisons of wet filament winding versus prepreg filament winding for type ii and type iv cng cylinders", 12th International Conference on Composite Materials, Paris, 1999, p. 686. Retrieved from https://www.iccm-central.org/Proceedings/ICCM12proceedings/site/papers/pap187.pdf.
- R. Stewart, "Filament winding spins light, strong composite structures with precision", Reinforced Plastics, Vol. 53, No. 5, 2009, pp. 34-39, doi: https://doi.org/10.1016/S0034-3617(09)70223-1.
- S. Koussios and O. K. Bergsma, "Friction Experiments for Filament Winding Applications", Journal of Thermoplastic Composite Materials, Vol. 19, No. 1, 2006, pp. 5-34, doi: https://doi.org/10.1177/0892705706049561.
- J. M. Alegre, P. Bravo, M. Preciado, and M. Solaguren-Beascoa, "Simulation procedure of high pressure vessels using the wire winding technique", Engineering Failure Analysis, Vol. 17, No. 1, 2010, pp. 61-69, doi: https://doi.org/10.1016/j.engfailanal.2008.11.004.
- B. G. Park, "Development of 100L-700MPa High Pressure Vessel Design Technique Using Finite Element Analysis", Korean Society for Precision Engineering Academic Conference, 2019, p. 72. Retrieved from http://www.dbpia.co.kr/journal/articleDetail?nodeId=NODE08742208.
- J. B. Park and J. H. Noh, "A study on the wire winding technique of ultra high pressure vessel for the improvement of physical properties", Korean Society for Precision Engineering Academic Conference, 2017, p. 651. Retrieved from http://www.dbpia.co.kr/journal/articleDetail?nodeId=NODE07205777.
- S. Kim and C. Lee, "Study on the Radial Stress Considering Mechanical Characteristics of Substrate in Wound Rolls", Journal of the Korean Society for Precision Engineering, Vol. 33, No. 2, 2016, pp. 115-119, doi: https://doi.org/10.7736/KSPE.2015.33.2.115.
- B. G. Park and H. J. Lee, "FE Analysis of high pressure vessels using the wire-winding technique", The Korean Society of Mechanical Engineers Academic Conference, 2018, pp. 2630-2263. Retrieved from http://www.dbpia.co.kr/journal/articleDetail?nodeId=NODE07607815.