로봇학회논문지 (The Journal of Korea Robotics Society)

  • 제14권3호
  • /
  • Pages.179-185
  • /
  • 2019
  • /
  • 1975-6291(pISSN)
  • /
  • 2287-3961(eISSN)
한국로봇학회 (Korea Robotics Society)
권호 표지
DOI QR코드

DOI QR Code

고출력 및 경량 협동로봇 위한 케이블-유압 구동 3자유도 매니퓰레이터 설계 및 구현

Design and Implementation of 3DoF Manipulator with Cable-Hydraulic Driven Actuation for Cooperative Robot with High Output and Low Inertia

  • Kim, Jungyeong (Robotics and Virtual Engineering, University of Science and Technology (UST)) ;
  • Kim, Jin Tak (Robotics R&D Group, Korea Institute of Industrial Technology (KITECH)) ;
  • Park, Sangshin (Robotics R&D Group, Korea Institute of Industrial Technology (KITECH)) ;
  • Han, Sangchul (Robotics R&D Group, Korea Institute of Industrial Technology (KITECH)) ;
  • Kim, Jinhyeon (Robotics R&D Group, Korea Institute of Industrial Technology (KITECH)) ;
  • Cho, Jungsan (Robotics, Industrial Technology, University of Science and Technology (UST))
  • 투고 : 2019.05.02
  • 심사 : 2019.08.07
  • 발행 : 2019.08.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents cable-hydraulic driven 3DoF (Degree-of-Freedom) manipulator for cooperative robot with high output/low inertia and enhancing lager workspace of hydraulic manipulator. Hydraulic actuation could be solution to design more higher output manipulator than the one of electric motor actuation due to install actuation source and robot joint separated. In spite of this advantage, the conventional hydraulic driven manipulator using cylinder or vane actuator is not suitable for the candidate of cooperative robot because smaller workspace owing to small RoM (Range of Motion) hydraulic actuator. In this paper, we propose 3DoF manipulator with cable-hydraulic actuation which is more larger ratio of payload-to-weight than the one of conventional cooperative manipulator and larger workspace than the one of existing hydraulic driven manipulator. The performance of proposed manipulator was demonstrated by the experiments for confirming overall workspace task, high payload operation task under worst situation and comparing repeatability between developed manipulator and existed cooperative robots. The results of experiments showed that the appropriate performance of proposed manipulator for cooperative robot.

키워드

참고문헌

  1. FRANKA EMIKA, [Online], https://www.franka.de, Accessed: April 22, 2019.
  2. Universal Robots, [Online], http://www.universal-robots.com, Accessed: April 22, 2019.
  3. YASKAWA, [Online], https://smart.motoman.com/en-us, Accessed: April 22, 2019.
  4. Doosan Robotics, [Online], http://www.doosanrobotics.com, Accessed: April 22, 2019.
  5. KUKA, [Online], https://www.kuka.com, Accessed: April 22, 2019.
  6. Neuromeka, [Online], https://www.neuromeka.com, Accessed: April 22, 2019.
  7. Y.-J. Kim, "Anthropomorphic Low-Inertia High-Stiffness Manipulator for High-Speed Safe Interaction," IEEE Transactions on Robotics, vol. 33, no. 6, pp. 1358-1374, Dec., 2017. https://doi.org/10.1109/TRO.2017.2732354
  8. L. Baccelliere, N. Kashiri, L. Muratore, A. Laurenzi, M. Kamedula, A. Margan, S. Cordasco, J. Malzahan, and N. G. Tsagarakis, "Development of a Human Size and Strength Compliant Bi-Manual Platform for Realistic Heavy Manipulation Tasks," 2017 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), pp. 5594-5601, Vancouver, BC, Canada, 2017.
  9. K.-H. Ahn and J.-B. Song, "6 DOF Industrial Robot Based on Multi-DOF Counterbalance Mechanism," Journal of Korea Robotics Society, vol. 12, no. 1, pp. 11-18, Mar., 2017. https://doi.org/10.7746/jkros.2017.12.1.011
  10. H. E. Merritt, Hydraulic Control Systems, John Wiley & Sons, 1967.
  11. Kraft TeleRobotics, [Online], http://www.krafttelerobotics.com, Accessed: April 22, 2019.
  12. B. U. Rehman, M. Focchi, J. Lee, H. Dallali, D. G. Caldwell, and C. Semini, "Towards a multi-legged mobile manipulat-or," 2016 IEEE International Conference on Robotics and Automation (ICRA), Stockholm, Sweden, pp. 3618-3624, 2016.
  13. J. Kim, S. Park, and J. Cho, "Design and Implementation of the Cable Rod Hydraulic Actuator for Robotic Revolute Joints," Journal of the Korean Society for Precision Engineering, vol. 33, no. 9, pp. 723-780, Sept., 2016. https://doi.org/10.7736/KSPE.2016.33.9.723
  14. LIROS Unlimited Rope Solutions, [Online], https://www.liros.com, Accessed: April 22, 2019.
  15. Steel Wire Rope, [Online], http://www.steelwirerope.com, Accessed: April 22, 2019.
  16. K. Kong, J. Bae, and M. Tomizuka, "Torque Mode Control of a Cable-Driven Actuating System by Sensor Fusion," Journal of Dynamic Systems, Measurement, and Control, vol. 135, no. 3, pp. 031003.1-7, 2013. https://doi.org/10.1115/1.4023064
  17. KNR Systems Inc., [Online], http://rnd.knrsys.com, Accessed: April 22, 2019.
  18. J. Kim, B. Park, S. Park, J. Kim, and J. Cho, "Development of Mobile Hydraulic Manipulator for Complex Tasks," The 33rd ICROS Annual Conference (ICROS 2018), Buan, Korea, pp. 232-233, 2018.
  19. J. S. Cho, "A Study of Hydraulic Actuator Based on Electro Servo Valve for A Walking Robot," Journal of Drive and Control, vol. 13, no. 2, pp. 26-33, 2016. https://doi.org/10.7839/ksfc.2016.13.2.026
  20. J. Seo, S. Park, B. Park, and J. Kim, "Implementation of Hydraulic Quadruped Robot Platform with SLIP Based Leg," KSPE 2016 Spring Conference, pp. 199-200, Jeju, Korea, 2016.
  21. J. Kim, B. Park, J. Kim, S. Park, J. Kim, and J. Cho, "Development of Integrated Platform of Quadruped Robot and Manipulator for Traveling and Manipulation on Rugged Terrain," The 14th Korea Robotics Society Annual Confere-nce (KRoC 2019), Pyeongchang, Korea, 2019.
  22. ISO 9283:1998 Manipulating industrial robots - Performan-ce criteria and related test methods, [Online], Available: https://www.iso.org/standard/22244.html, Accessed: April 22, 2019.

피인용 문헌

  1. 고출력 및 경량 협동로봇 위한 케이블-유압 구동 3자유도 매니퓰레이터 설계 및 구현 vol.14, pp.3, 2019, https://doi.org/10.7746/jkros.2019.14.3.179