Acknowledgement
Supported by : Sam Higginbottom University of Agriculture Technology and Sciences (SHUATS)
References
- Aabid, A. and Khan, S.A. (2018), "Optimization of heat transfer on thermal barrier coated gas turbine blade", Mater. Sci. Eng., 370 (1), 1-9. https://doi.org/10.1088/1757-899X/370/1/012022
- Al Ali, A.R. and Janajreh, I. (2015), "Numerical simulation of turbine blade cooling via jet impringement", Proceeding of the 7th International Conference on Applied Energy, Abu Dhabi, United Arab Emirates, March.
- Ali, R., Shehbaz, T. and Bemporad, E. (2018), "Investigation on Failure in Thermal Barrier Coating on Gas Turbine First-Stage Rotor Blade", J. Fail. Anal. Prevention, 18(5), 1062-1072. https://doi.org/10.1007/s11668-018-0530-5
- Almasi, A., Avval, H.B. and Ahmadi, P. (2011), "Thermodynamic modelling, energy and exergoeconomic analysis and optimization of marsh gas turbine plant", Proceeding of The Global Conference on Global Warming, Lisbon, Portugal, July.
- Begum, F., Reddy, V.R. and Ramanjaneyulu, S. (2016), "Design and thermal analysis of cooling of gas turbine blade through radial holes", Material Today, ICAAMM, 4, 7714-7722. https://doi.org/10.1016/j.matpr.2017.07.106
- Beghini, M., Bertini, L. and Santus, C. (2017), "High temperature fatigue testing of gas turbine blades", Procedia Structural Integrity, FDMD, 7, 206-213. https://doi.org/10.1016/j.prostr.2017.11.079
- Bons, J.P. (2010), "A review of surface roughness effect in gas turbine", J. Turbomach., 132 (2), 1-16. https://doi.org/10.1115/1.3066315
- Brandao, P., Infante, V. and Deus, A.M. (2016), "Thermo-mechanical modelling of a high pressure turbine blade of an airplane gas turbine engine", Proceedings of the 15th Portuguese Conference on Fracture, Paco de Arcos, Portugal, February.
- Caron, P. and Khan, T. (1999), "Evolution of Ni-based superalloys for single crystal gas turbine blade application", Aerosp. Sci. Technol., 3, 513-523. https://doi.org/10.1016/S1270-9638(99)00108-X
- Carter, T.J. (2005), "Common failures in gas turbine blade", Eng. Fail. Anal., 12, 237-247. https://doi.org/10.1016/j.engfailanal.2004.07.004
- Casadei, F., Bertoldi, K. and Clarke, D.R. (2013), "Finite element study of multi-modal vibration damping for thermal barrier coating applications", Comput. Mater. Sci., 79, 908-917. https://doi.org/10.1016/j.commatsci.2013.07.027
- Chintala, G. and Gudimetla, P. (2014), "Optimum material evaluation for gas turbine using RE and FEA", Proceedings of the 12th Global Conference on Manufacturing and Management, Vellore, India, December.
- Chung, H., Sohn, H. and Park, J.S. (2016), "Thermo-structural analysis of the cracks on the gas turbine vane segment having multiple airfoils", Energy, 118, 1275-1285. https://doi.org/10.1016/j.energy.2016.11.005
- Cowles, B.A. (1996), "High cycle fatigue in aircraft gas turbines - an industry perspective", Int. J. Fracture, 80, 147-163. https://doi.org/10.1007/BF00012667
- Gurajarapu, N., Rao, V.N.B. and Kumar, I.N.N. (2014), "Selection of a suitable material and failure investigation on a turbine blade of marine gas turbine engine using Reverse Engineering and FEA Techniques", Int. J. u- and e- Service, Sci. Technol., 7(6), 297-308. https://doi.org/10.14257/ijunesst.2014.7.6.26
- Hou, J., Wicks, B.J. and Antoniou, R.A. (2002), "An investigation of fatigue failures of turbine blades in a gas turbine engine by mechanical analysis", Eng. Fail. Anal., 9, 201-211. https://doi.org/10.1016/S1350-6307(01)00005-X
- Huda, Z. (2009), "Metallurgical failure analysis for a blade failed in a gas turbine engine of a power plant", Mater. Des., 30, 3121-3125. https://doi.org/10.1016/j.matdes.2008.11.030
- Huda, Z. (2017), "Energy-efficient gas-turbine blade-material technology - a review", Mater. Technol., 51(3), 355-361. https://doi.org/10.17222/mit.2015.196
- Kanesund, J., Brodin, H. and Johansson, S. (2019), "Hot corrosion influence on deformation and damage mechanisms in turbine blade made of IN-792 during service", Eng. Fail. Anal., 96, 118-129. https://doi.org/10.1016/j.engfailanal.2018.10.004
- Khawaja, H. and Motamedi, M. (2014), "Selection of high performance alloy for gas turbine blade using multiphysics analysis", Int. J. Multiphys. Volume, 8(1), 91-100. http://dx.doi.org/10.1260/1750-9548.8.1.91
- Kim, K.M., Yun, N. and Jeon, Y.H. (2010), "Conjugated heat transfer and temperature distributions in a gas turbine combustion liner under base-load operation", J. Mech. Sci. Technol., 24 (9), 1939-1946. https://doi.org/10.1007/s12206-010-0625-8
- Kini, C.R., Shenoy, B.S. and Sharma, N.Y. (2014), "Thermo-structural analysis of HP stage gas turbine blades having helicoidal cooling ducts", Int. J. Adv. Mech. Aeronaut. Eng., 1(2), 57-60.
- Kumar, R.R. and Pandey, K.M. (2016), "Static structural analysis of gas turbine blade", J. Basic Appl. Eng. Res., 3(3), 276-281. https://doi.org/10.1088/1757-899X/225/1/012102
- Kumar, G.M. and Rose, J.B.R. (2015), "Comparative analysis of advanced gas turbine blade materials used in aircraft application", Int. J. Innov. Res. Technol. Sci. Eng., 1(4), 34-43.
- Li, B., Fan, X., Li, D. and Jiang, P. (2017), "Design of thermal barrier coatings thickness for gas turbine blade based on Finite Element Analysis", Report No. ID 2147830; State Key Laboratory for Strength and Vibration of Mechanical Structures, School of Aerospace Engineering, Xi'an Jiaotong University, Xi'an, China.
- Madhu, P. (2016), "Stress analysis and life estimation of gas turbine blisk for different materials of a jet engine", Int. J. Sci. Res., 5(6), 1103-1107. http://dx.doi.org/10.21275/v5i6.NOV164440
- Marcin, J.D. and Gupta, D.K. (1994), "Protective coating in the gas turbine engine", Surf. Coat. Technol., 68/69, 1-9. https://doi.org/10.1016/0257-8972(94)90129-5
- Mazarbhuiya, H.M.S.M. and Pandey, K.M. (2017), "Steady state analysis of high pressure gas turbine blade using finite element analysis", Mater. Sci. Eng. IOP Conference Series, 225(1), 012113. https://doi.org/10.1088/1757-899X/225/1/012113
- Mazur, Z., Luna-Ramirez, A. and Islas, J.A. (2005), "Failure analysis of a gas turbine blade made up of Inconel 738LC alloy", Eng. Fail. Anal., 12, 474-486. https://doi.org/10.1016/j.engfailanal.2004.10.002
- Mirzaei, M. and Karimi, R. (2001), "Stress analysis and life assessment of a gas turbine blade", ICF100312OR.
- Poursaeidi, E., Aieneravaie, M. and Mohammadi, M.R. (2008), "Failure analysis of second stage blade in a gas turbine engine", Eng. Fail. Anal., 15, 1111-1129. https://doi.org/10.1016/j.engfailanal.2007.11.020
- Rani, S., Agrawal, A.K. and Rastogi, V. (2017), "Failure analysis of a first stage IN738 gas turbine blade tip cracking in a thermal power plant", Case Studies Eng. Fail. Anal., 8, 1-10. https://doi.org/10.1016/j.csefa.2016.11.002
- Rao, V.N.B., Kumar, I.N.N. and Prasad, K.B. (2014), "Failure analysis of gas turbine blades in a gas turbine engine used for marine applications", Int. J. Eng. Sci. Technol., 6(1), 43-48. https://doi.org/10.4314/ijest.v6i1.5
- Ravindra, K. and Raju, P.V.D. (2017), "Modelling and analysis of gas turbine rotor blade", Int. Res. J. Eng. Technol., 4(12), 141-146.
- Reyhani, M.R., Alizadeh, M., Fathi, A. and Khaledi, H. (2013), "Turbine blade temperature calculation and life estimation- a sensitive analysis", Propuls. Power Res., 2(2), 148-161. https://doi.org/10.1016/j.jppr.2013.04.004
- Saini, A.K. and Shandil, N. (2015), "Thermal analysis of partially stabilised zirconia and lanthanum magnesium Hexa-aluminate as Thermal Barrier coating over Hastealloy X gas turbine blade", J. New Technol. Mater., 5(2), 8-19. https://doi.org/10.12816/0019427
- Saini, A.K., Das, D. and Pathak, M.K. (2012), "Thermal barrier coating- application, stability and longevity aspect", Procedia Eng., 38, 3173-3179. https://doi.org/10.1016/j.proeng.2012.06.368
- Salehnasab, B., Hajjari, E. and Mortazavi, S.A. (2017), "Failure assessment of the first stage blade of a gas turbine engine", Transact. Indian Inst. Metals, 70(8), 1-8. https://doi.org/10.1007/s12666-016-1031-4
- Tong, F., Gou, W. and Li, L. (2018), "Thermo-mechanical stress analysis for gas turbine blade with cooling structures", Multidiscipl. Model. Mater. Struct., 14(4), 722-734. https://doi.org/10.1108/MMMS-08-2017-0081
- Ujade, G.D. and Bhambere, M.B. (2014), "Review of structural and thermal analysis of gas turbine", Int. J. Mech. Eng. Rob. Res., 3(2), 347-352.
- Xue, X., Yu, Y. and Xie, J. (2017), "The influence of the nozzle diameters on the interaction characteristics of combustion gas jets and liquid", Defence Technology, 13, 257-262. https://doi.org/10.1016/j.dt.2017.05.016
-
Zhu, J. and Ma, K. (2014), "Microstructure and mechanical properties of thermal barrier coating at
$1400^{\circ}C$ treatment", Theoret. Appl. Mech. Lett., 4, 1-5. https://doi.org/10.1063/2.1402108
Cited by
- Experimental and numerical investigation on gas turbine blade with the application of thermal barrier coatings vol.8, pp.4, 2019, https://doi.org/10.12989/amr.2019.8.4.275