그림 1. FBR 회로 Fig. 1 FBR circuit
그림 2. FBR 회로 시뮬레이션 (a) 전류 파형 (b) 전압 파형 Fig. 2 FBR circuit simulation (a) current waveform (b) voltage waveform
그림 3. SSHI 회로 Fig. 3 SSHI circuit
그림 4. SSHI 동작 파형 Fig. 4 SSHI operation waveform
그림 5. SECE 회로 Fig. 5 SECE circuit
그림 6. SECE 시뮬레이션 파형 (a) 전압 파형 및 스위치 제어신호 (b) 전류 파형 Fig. 6 SECE simulation waveform (a) Voltage waveform (b) Current waveform
그림 7. FBR, SSHI, SECE 회로 출력 전력 비교 Fig. 7 FBR, SSHI, SECE circuit output power comparison
그림 8. 제안된 SECE 회로 Fig. 8 The proposed SECE circuit
그림 9. 제안된 스위치 제어회로(:SW_CTRL) Fig. 9 The proposed switch control circuit (:SW_CTRL)
그림 10. 고전압 비교기 회로 및 시뮬레이션 (a) 고전압 비교기 회로 (b) 입력전압 및 출력 전압 Fig. 10 High voltage comparator circuit and simulation (a) High voltage comparator circuit (b) Input voltage and output voltage
그림 11. CSD 회로 및 시뮬레이션 (a) CSD 회로 (b) 입력 전압 및 출력 전압 Fig. 11 CSD circuit and simulation (a) CSD circuit (b) Input voltage and output voltage
그림 12. 제안된 스위치 제어회로 파형 Fig. 12 The proposed switch control circuit waveform
그림 13. 제안된 SECE 출력 전압 비교 Fig. 13 The proposed switch control circuit waveform
그림 14. 제안된 SECE 회로 레이아웃 Fig. 14 The proposed SECE circuit layout
표 1. FBR, SSHI, SECE회로의 부하에 따른 출력 전력 비교표 Table 1. Comparison of output power according to load of FBR, SSHI, SECE circuit
References
- K. Song, "Development Trend of Piezoelectric Energy Harvesting Technology," Konetic Report, 2016-117.
- R. Matsuzaki and A. Todoroki "Wireless Strain Monitoring of Tires Using Electrical Capacitance Changes with an Oscillating Circuit," J. of Sensors and Actuators a-Physical, vol. 119, 2005, pp. 323-331. https://doi.org/10.1016/j.sna.2004.10.014
- I. Kim "Thermoelectric energy conversion technology," Kulturno Informativni Centar News, vol. 16, no. 4, 2013.
- Q. Brogan, T. Conner, D. Ha, "Solar and thermal energy harvesting with a wearable jacket," In Proc. IEEE Int. Symp. on Circuits and Systems, June. 2014, pp. 1412-1415.
- J. Park, "Low power RF energy harvesting from UHF RFID system," J. of The Korean Institute of Illuminating and Electrical Installation Engineers, vol. 23 no. 1, 2009, pp. 182-187. https://doi.org/10.5207/JIEIE.2009.23.1.182
- H. Park, B. Kim, and D. Kim, "An Multiple energy harvester with an improved energy harvesting platform for self-powered wearable device," J. of the Korea Institute of Electronic Communication Sciences, vol. 13, no. 1, 2018, pp. 153-162. https://doi.org/10.13067/JKIECS.2018.13.1.153
- H. Park, J. Kwon, B. Kim, and D. Kim, "Multi-Source Based Energy Harvesting Architecture for IoT and Wearable System," J. of the Korea Institute of Electronic Communication Sciences, vol. 14, no. 1, 2019, pp. 225-234. https://doi.org/10.13067/JKIECS.2019.14.1.225
- S. Y. Jia, C. D. Do, and A. A. Seshia, "An Efficient SSHI Interface with Increased Input Range for Piezoelectric Energy Harvesting under Variable Conditions," J. of Solid-State Circuit, vol. 51, Nov. 2016, pp.2729-2742. https://doi.org/10.1109/JSSC.2016.2594943
- Y. Wu, A. Badel, F Formosa, W. Liu, and A. E. Agbossou, "Piezoelectric Vibration Energy Harvesting by Optimized Synchronous Electric Charge Extraction," J. of Intelligent Material Systems and Structure, vol. 24, Aug. 2013, pp. 1445-1458. https://doi.org/10.1177/1045389X12470307
- Y. K. Ramadass and A. P. handrakasan, "An Efficient Piezoelectric Energy Harvesting Interface Circuit Using a Bias-Flip Rectifier and Shared Inductor," IEEE. J. of Solid-State Circuit ,vol. 45, 2010, pp.189-204. https://doi.org/10.1109/JSSC.2009.2034442