DOI QR코드

DOI QR Code

A Study on Slamming Impact Pressure by a Numerical Method based on the Cartesian-grid System

직교격자계 기반의 수치계산법을 이용한 슬래밍 충격압력의 연구

  • Kim, Ki-Yong (Dept. of Naval Architecture and Ocean Engineering, Graduate School, Inha University) ;
  • Lee, Young-Gill (Dept. of Naval Architecture and Ocean Engineering, Inha University) ;
  • Ha, Yoon-Jin (Offshore Plant and Marine Energy Research Division, KRISO/KIOST) ;
  • Kang, Ui-Ha (Dept. of Naval Architecture and Ocean Engineering, Graduate School, Inha University) ;
  • Park, Jeong-Ho (Dept. of Naval Architecture and Ocean Engineering, Graduate School, Inha University) ;
  • Lee, Sun-Kyu (Dept. of Naval Architecture and Ocean Engineering, Graduate School, Inha University) ;
  • Lee, Chang-Jin (Dept. of Naval Architecture and Ocean Engineering, Graduate School, Inha University)
  • 김기용 (인하대학교 대학원 조선해양공학과) ;
  • 이영길 (인하대학교 조선해양공학과) ;
  • 하윤진 (선박해양플랜트연구소 해양플랜트.에너지연구본부) ;
  • 강의하 (인하대학교 대학원 조선해양공학과) ;
  • 박정호 (인하대학교 대학원 조선해양공학과) ;
  • 이선규 (인하대학교 대학원 조선해양공학과) ;
  • 이창진 (인하대학교 대학원 조선해양공학과)
  • Received : 2018.08.08
  • Accepted : 2019.01.30
  • Published : 2019.08.20

Abstract

In this study, numerical simulations of slamming impact pressure acting on the flat plate and wedge type models using the cartesian-grid system and Modified Marker-Density Method (MMD method) were performed and the results were examined. The flat plate and wedge type models were selected as target objects, the turbulence characteristics were considered by applying the Sub-Grid Scale (SGS) turbulence model. Through this study, how the pressure acting on the target objects according to the incident angle influences the slamming impact pressure was examined and the results were compared with the flow characteristics of other experimental results. Also, the degree of slamming impact pressure is evaluated with respect to the cartesian-grid system and MMD method, which is easy to use and has a high degree of calculation for free surface.

Keywords

References

  1. Hong, S.Y., Kim, K.H. & Hwang, S. C., 2017. Comparative study of water-impact problem for ship section and wedge drops, International Journal of Offshore and Polar Engineering, 27(2), pp.123-134. https://doi.org/10.17736/ijope.2017.jc699
  2. Jeong, K.L. & Lee, Y.G., 2014. Numerical simulation of spilling breaker using the modified marker-density method. Journal of the Society of Naval Architects of Korea, 51(1), pp.58-66. https://doi.org/10.3744/SNAK.2014.51.1.58
  3. Kim, K.H. et al., 2014. Experimental study of water impact loads on symmetric and asymmetric wedges, Journal of Ocean Engineering and Technology, 28(3), pp.209-217. https://doi.org/10.5574/KSOE.2014.28.3.209
  4. Lee, Y.G., Jeong, K.L. & Kim, N.C., 2012. The marker-density method in cartesian grids applied to nonlinear ship waves. Computer & Fluids, 63(30), pp.57-69. https://doi.org/10.1016/j.compfluid.2012.04.003
  5. Park, I.R. & Chun, H.H., 1999a. Analysis of flow around a rigid body on water-entry & exit problem. Journal of the Society of Naval Architects of Korea, 36(4), pp.37-47.
  6. Park, J.C., Kim, M.H. & Miyata, 1999b. Fully non-linear free-surface simulations by a 3D viscous numerical wave tank, International Journal for Numerical Methods in Fluids, 29(6), pp.685-703. https://doi.org/10.1002/(SICI)1097-0363(19990330)29:6<685::AID-FLD807>3.0.CO;2-D
  7. Park, J.S., Oh, S.H., Kwon, S.H. & Chung, J.Y., 2009. A study on slamming impact pressure. Journal of Ocean Engineering and Technology, 23(1), pp.67-73.
  8. Shin, H.K., Kim, S.C. & Cho, S.R., 2010. Experimental investigations on slamming impact by drop test. Journal of the Society of Naval Architects of Korea, 47, pp.410-420. https://doi.org/10.3744/SNAK.2010.47.3.410
  9. Von Karman, T., 1929. The impact of seaplane floats during landing. National Advisory Committee for Aeronautics, No.321. Washington, pp.1-8.
  10. Wagner, V.H., 1932. Uber Stoss und Gleitvorgange an der Oberflache von Flussigkeiten, Aeischrift fuur Angewandle Mathematik und Mechanik, 12, pp193-215. https://doi.org/10.1002/zamm.19320120402
  11. Yum, D.J. & Yoon, B.S., 2008. Numerical simulation of slamming phenomena for 2-D wedges. Journal of the Society of Naval Architects of Korea, 45(5), pp.477-486. https://doi.org/10.3744/SNAK.2008.45.5.477