Structural Engineering and Mechanics

  • 제71권2호
  • /
  • Pages.109-118
  • /
  • 2019
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Numerical study on tensioned membrane structures under impact load

  • Zhang, Yingying (Jiangsu Key Laboratory of Environmental Impact and Structural Safety in Engineering, State Key Laboratory for Geomechanics & Deep Underground Engineering, Jiangsu Collaborative Innovation Center for Building Energy Saving and Construction Technology, China University of Mining and Technology) ;
  • Zhao, Yushuai (Jiangsu Key Laboratory of Environmental Impact and Structural Safety in Engineering, State Key Laboratory for Geomechanics & Deep Underground Engineering, Jiangsu Collaborative Innovation Center for Building Energy Saving and Construction Technology, China University of Mining and Technology) ;
  • Zhang, Mingyue (Jiangsu Key Laboratory of Environmental Impact and Structural Safety in Engineering, State Key Laboratory for Geomechanics & Deep Underground Engineering, Jiangsu Collaborative Innovation Center for Building Energy Saving and Construction Technology, China University of Mining and Technology) ;
  • Zhou, Yi (School of Civil Engineering, Southwest Jiaotong University) ;
  • Zhang, Qilin (College of Civil Engineering, Tongji University)
  • 투고 : 2018.10.30
  • 심사 : 2019.03.21
  • 발행 : 2019.07.25
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents the numerical simulation of membrane structure under impact load. Firstly, the numerical simulation model is validated by comparing with the test in Hao's research. Then, the effects of the shape of the projectile, the membrane prestress and the initial impact speed, are investigated for studying the dynamic response and failure mechanism, based on the membrane displacement, projectile acceleration and kinetic energy. Finally, the results show that the initial speed and the punch shape are related with the loss of kinetic energy of projectiles. Meanwhile, the membrane prestress is an important factor that affects the energy dissipation capacity and the impact resistance of membrane structures.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China

참고문헌

  1. AS/NZS (2011), Structural Design Actions. Part 2: Wind Actions, Standard Australia and Standards New Zealand; Sydney, NSW, Australia.
  2. Chen, W. and Hao, H. (2015), "Performance of structural insulated panels with rigid skins subjected to windborne debris impacts-Experimental investigations", Construct. Build. Mater., 77, 241-252. https://doi.org/10.1016/j.conbuildmat.2014.12.112.
  3. Chen, W., Hao, H. and Chen, S. (2015), "Performance of composite structural insulated panel with metal skin subjected to blast loading", Mater. Design, 84, 194-203. https://doi.org/10.1016/j.matdes.2015.06.081.
  4. Chen, W., Hao, H. and Irawan, P. (2016), "Experimental investigations of fabric material against projectile impacts", Construct. Build. Mater., 104, 142-153. https://doi.org/10.1016/j.conbuildmat.2015.12.028.
  5. Ding, J. (2010), "Mechanism analysis of wind-induced damage of cable-membrane structures", Ph.D. Dissertation, Tongji University, Shanghai, China.
  6. Forster, B. and Mollaret, M. (2004), European Design Guide for Tensile Structures, Tensinet, Brussel, Belgium.
  7. Grayson, M., Pang W.C. and Schiff, S. (2012), "Threedimensional probabilistic wind-borne debris trajectory model for building envelope impact risk assessment", J. Wind Eng. Industrial Aerodynam., 102(3), 22-35. https://doi.org/10.1016/j.jweia.2012.01.002.
  8. Li, D., Zheng, Z.L. and Liu, C.Y. (2017), "Dynamic response of rectangular prestressed membrane subjected to uniform impact load", Arch. Civil Mech. Eng., 17(3), 586-598. https://doi.org/10.1016/j.acme.2017.01.006.
  9. Li, D., Zheng, Z.L. and Tian, Y. (2017), "Stochastic nonlinear vibration and reliability of orthotropic membrane structure under impact load", Thin-Wall. Struct., 119, 247-255. https://doi.org/10.1016/j.tws.2017.06.008
  10. Li, D.Y., Yang, Q.S. and Tian, Y.J. (2015), "Wind pressure zones on a saddle roof based on fuzzy C-means clustering", J. Vib. Shock, 34(5).
  11. Li, Y., Gu, B. and Sun, B. (2016), "Energy absorption of threedimensional braided composites under impact punch shear loading", Text. Res. J., 86(19). https://doi.org/10.1177/0040517515621127.
  12. Lin, N., Holmes, J.D. and Letchford, C.W. (2007), "Trajectories of wind-borne debris in horizontal winds and applications to impact testing", J. Struct. Eng., 133(2), 274-282. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:2(274).
  13. Liu, C., Zheng, Z. and Yang, X. (2016), "Analytical and numerical studies on the nonlinear dynamic response of orthotropic membranes under impact load", Earthq. Eng. Eng. Vib, 15(4), 657-672. https://doi.org/10.1007/s11803-016-0356-7.
  14. Malla, R.B. and Gionet, T.G. (2013), "Dynamic response of a pressurized frame-membrane lunar structure with regolith cover subjected to impact load", J. Aerosp. Eng., 26(4), 855-873. https://doi.org/10.1061/(ASCE)AS.1943-5525.0000187.
  15. Meng, Q., Hao, H. and Chen, W. (2016), "Laboratory test and numerical study of structural insulated panel strengthened with glass fiber laminate against windborne debris impact", Construct. Build. Mater., 114, 434-446. https://doi.org/10.1016/j.conbuildmat.2016.03.190.
  16. Meng, Q.F., Hao, H. and Chen, W.S. (2016), "Numerical study of basalt fiber cloth strengthened structural insulated panel under windborne debris impact", Appl. Mech. Mater., 846(17):446-451. https://doi.org/10.4028/www.scientific.net/AMM.846.446.
  17. Moghim, F. and Caracoglia, L. (2012), "A numerical model for wind-borne compact debris trajectory estimation: Part 1 - Probabilistic analysis of trajectory in the proximity of tall buildings", Eng. Struct., 38(4), 153-162. https://doi.org/10.1016/j.engstruct.2011.11.020.
  18. Moghim, F., Xia, F.T. and Caracoglia, L. (2015), "Experimental analysis of a stochastic model for estimating wind-borne compact debris trajectory in turbulent winds", J. Fluids Struct., 54, 900-924. https://doi.org/10.1016/j.jfluidstructs.2015.02.007.
  19. Moghim, F., Xia, F.T. and Caracoglia, L. (2015), "Experimental analysis of a stochastic model for estimating wind-borne compact debris trajectory in turbulent winds", J. Fluid. Struct., 54, 900-924. https://doi.org/10.1016/j.jfluidstructs.2015.02.007.
  20. Mostofi, T.M., Babaei, H. and Alitavoli, M. (2016), "Theoretical analysis on the effect of uniform and localized impulsive loading on the dynamic plastic behaviour of fully clamped thin quadrangular plates", Thin-Wall. Struct., 109, 367-376. https://doi.org/10.1016/j.tws.2016.10.009.
  21. Ning, L., Holmes, J. and Letchford, C. (2007), "Trajectories of windborne debris and applications to impact testing", J. Struct. Eng., 133(2), 274-282. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:2(274).
  22. Phoenix, S.L. and Porwal, P.K. (2003), "A new membrane model for the ballistic impact response and V 50, performance of multiply fibrous systems", J. Solids. Struct., 40(24), 6723-6765. https://doi.org/10.1016/S0020-7683(03)00329-9.
  23. Sun, Y., Su, N. and Wu, Y. (2014), "Modeling of conical vortex induced fluctuating wind pressure spectra on large-span flat roofs", China Civil Eng. J., 47(1), 88-98.
  24. Wang, Y., Chen, X. and Young, R. (2015), "A numerical and experimental analysis of the influence of crimp on ballistic impact response of woven fabrics", Compos. Struct., 140, 44-52. https://doi.org/10.1016/j.compstruct.2015.12.055.
  25. Xu, H., Gentilini, G. and Yu, Z.X. (2018), "An energy allocation based design approach for flexible rockfall protection barriers", Eng. Struct., 173, 831-852. https://doi.org/10.1016/j.engstruct.2018.07.018.
  26. York, A.R., Sulsky, D. and Schreyer, H.L. (2015), "The material point method for simulation of thin m embranes", J. Numeric. Method. Eng., 44(10), 1429-1456. .
  27. Yu, Z.X., Qiao, Y.K. and Zhao L. (2018), "A simple analytical method for evaluation of flexible rockfall barrier part 2: application and full-scale test", Adv. Steel Construct., 14(2), 142-165.
  28. Yu, Z.X., Qiao, Y.K. and Zhao, L. (2018), "A simple analytical method for evaluation of flexible rockfall barrier part 1: working mechanism and analytical solution", Adv. Steel Construct., 14(2), 115-141.
  29. Zhang Y.Y., Xu, J.H. and Zhou, Y. (2019), "Central tearing behaviors of PVC coated fabrics with initial notch", Compos. Struct., 208, 618-633. https://doi.org/10.1016/j.compstruct.2018.09.104
  30. Zhang, Y.Y., Xu, J.H. and Zhang, Q.L. (2018), "Advances in mechanical properties of coated fabrics in civil engineering", J. Industiral Textile., 48(1), 255-271. https://doi.org/10.1177%2F1528083716679159. https://doi.org/10.1177/1528083716679159
  31. Zhang, Y.Y., Zhang, Q.L. and Yang, Z.F. (2015), "Load-dependent mechanical behavior of membrane materials and its effect on the static behaviors of membrane structures", J. Mater. Civil Eng., 27(11), https://doi.org/10.1061/(ASCE)MT.1943-5533.0001273.
  32. Zheng, Z., Guo, J. and Song, W. (2014), "Nonlinear free vibration analysis of axisymmetric polar orthotropic circular membranes under the fixed boundary condition", Math. Problem. Eng., 2014(3), 1-8. http://dx.doi.org/10.1155/2014/651356.
  33. Zheng, Z., Song, W. and Liu, G. (2012), "Study on dynamic response of rectangular orthotropic membranes under impact loading", J. Adhes. Sic. Technol., 26(10-11), 1467-1479. https://doi.org/10.1163/156856111X618335
  34. Zhou, H., Dhiradhamvit, K. and Attard, T.L. (2014), "Tornadoborne debris impact performance of an innovative storm safe room system protected by a carbon fiber reinforced hybrid polymeric-matrix composite", Eng. Struct., 59(2), 308-319. https://doi.org/10.1016/j.engstruct.2013.10.041.

피인용 문헌

  1. Impact Tensile Behaviors of PVDF Building Coated Fabrics vol.2020, 2019, https://doi.org/10.1155/2020/1620760
  2. Cutting pattern of a fabric for architectural hypar vol.890, 2019, https://doi.org/10.1088/1757-899x/890/1/012077
  3. Hailstone-induced dynamic responses of pretensioned umbrella membrane structure vol.24, pp.1, 2019, https://doi.org/10.1177/1369433220940149