• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.5
• /
• pp.18-24
• /
• 2016

An electromagnetic linear actuator is controlled precisely and securely and is useful in devices that require linear motion. The most commonly used method in the performance verification process for an electromagnetic actuator is finite element analysis that utilizes CAE. However, finite element analysis has the disadvantage that modeling and analysis consume a lot of time. Accordingly, lumped parameter analysis can be an alternative approach to the finite element method because of its computation iteration capability with fair accuracy. In this paper, the lumped parameter model and simulation results are presented. In addition, the results of the lumped parameter analysis are compared with those obtained from finite element analysis for verification.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.11 no.9
• /
• pp.462-474
• /
• 2001

In this paper, Generalized Differential Quadrature Method is applied to the buckling analysis of built-up columns without or with stay plates. numerical analysis using GDQM is carried out for various boundary conditions(simply supported conditions, fixed conditions, fixed-simply supported conditions), dimensionless stiffness parameter and dimensionless inertia moment parameter. The accuracy and convergence of solutions are compared with exact solutions of Gjelsvik to validate the results of GDQM. Results obtained by this method are as follows. 91) This method can yield the accurate numerical solutions using few grid points. (2) The buckling load of built-up column increases as the dimensionless stiffness parameter decreases. (3) The effects of boundary conditions on the buckling load are not considerable as the dimensionless stiffness parameter increases. (4) The buckling load of built-up column increases due to the stay plate.

• 한국데이터정보과학회:학술대회논문집
• /
• 2004.04a
• /
• pp.131-139
• /
• 2004

Robust parameter design is to identify appropriate settings of control factors that make the system's performance robust to changes in the noise factors that represent the source of variation. In this paper, we introduce a factor analysis approach to simultaneously optimize multiple quality characteristics in the robust parameter design. An example is illustrated to compare it with already proposed method.

• Journal of Korean Institute of Industrial Engineers
• /
• v.38 no.3
• /
• pp.198-207
• /
• 2012

In product or process parameter design, the case of multiple performance characteristics appears more commonly than that of a single characteristic. Numerous methods have been developed to deal with such multi-characteristic parameter design (MCPD) problems. Among these, this paper considers three representative methods, which are respectively based on the desirability function (DF), grey relational analysis (GRA), and principal component analysis (PCA). These three methods are then used to solve the MCPD problems in ten case studies reported in the literature. The performance of each method is evaluated for various combinations of its algorithmic parameters and alternatives. Relative performances of the three methods are then compared in terms of the significance of a design parameter and the overall performance value corresponding to the compromise optimal design condition identified by each method. Although no method is significantly inferior to others for the data sets considered, the GRA-based and PCA-based methods perform slightly better than the DF-based method. Besides, for the PCA-based method, the compromise optimal design condition depends much on which alternative is adopted while, for the GRA-based method, it is almost independent of the algorithmic parameter, and therefore, the difficulty involved in selecting an appropriate algorithmic parameter value can be alleviated.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.11
• /
• pp.1174-1179
• /
• 2008

Many modeling and calibration methods have been developed to analyze and design the biological wastewater treatment process. For the systematic use of activated sludge model (ASM) in a real treatment process, a most important step in this usage is a calibration which can find a key parameter set of ASM, which depends on the microorganism communities and the process conditions of the plants. In this paper, a standardized calibration protocol of the ASM model is developed. First, a weighted effluent quality index(WEQI) is suggested far a calibration protocol. Second, the most sensitive parameter set is determined by a sensitive analysis based on WEQI and then a parameter optimization method are used for a systematic calibration of key parameters. The proposed method is applied to a calibration problems of the single carbon removal process. The results of the sensitivity analysis and parameter estimation based on a WEQI shows a quite reasonable parameter set and precisely estimated parameters, which can improve the quality and the efficiency of the modeling and the prediction of ASM model. Moreover, it can be used for a calibration scheme of other biological processes, such as sequence batch reactor, anaerobic digestion process with a dedicated methodology.

• The KSFM Journal of Fluid Machinery
• /
• v.11 no.2
• /
• pp.7-12
• /
• 2008

It is attempted, in this study, to analyze the movement of the fluidity of polar magnetic fluid and to relate Newtonian fluid with the Inlet Length of infinity plates when distance between parallel plates is L. A numerical analysis is performed for the variation of inlet length when magnetic effect parameter and polar effect parameter which give special advantages to magnetic fluid are increased. From the result of numerical analysis, we confirmed that the inlet length shortens as the flux around the center axis is accelerated and the flux around the surface of a wall is controlled as the magnetic effect parameter and the polar effect parameter are increased.

• Journal of the Korean Society of Safety
• /
• v.14 no.1
• /
• pp.141-149
• /
• 1999

At present time, industrial accidents statistics are used as the basic data of the policy to prevent industrial accidents and the plan to applicate the industrial accident insurance. But this statistical data is not sufficient for the effective safety management because it is the expression of the itemized distribution and the frequency for the whole cases. This study tried to correlational analysis for each causes by defining investigational items as their accident parameters. The correlational analysis, between the unsafe action and status and their relational causes, was performed to analyze the occurrence causes of industrial accident. And to assume the severity of accident, the correlativity and independency between causes and direct causes which are defined hospital days subordinate parameter were analyzed. In addition, this study expressed numerically the effectiveness of subordinate parameters depended on the level of independent parameter by presenting the predictive model between dependent parameter and independent parameter, which have the categorical parameter, through the Logit analysis method.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.3
• /
• pp.439-444
• /
• 2016

The method for extracting the SPICE model parameter of Schottky diode under DC forward bias is proposed. A method for improving the accuracy of the SPICE model parameter at various temperatures is proposed. Three analysis steps according to the magnitude of the current is used in order to extract the parameters effectively. At each analysis step, initial parameters are calculated by using the current-voltage equations and the Levenberg-Marquardt analysis is proceeded. To verify the validity of the proposed method, the SPICE model parameters for the BAT45 and FSV1045 under DC forward bias is extracted. Schottky diode currents obtained from the proposed method shows the average relative error of 6.1% and 9% compared with the measured data for the BAT45 and FSV1045 sample at various temperatures.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.1
• /
• pp.92-99
• /
• 2011

In this study, new multi-axial, critical plane based, fretting fatigue crack initiation parameter is developed by the addition of a new term into the Modified Shear Stress Range(MSSR) parameter. The newly developed parameter (MSSR') is then used to evaluate fretting fatigue life of titanium alloy, Ti-6A1-4V with various contact conditions. Finite element analysis is also used in order to obtain stress distribution on the contact surface during fretting fatigue test, which is then used for the calculation of fretting fatigue parameter. The MSSR' parameter shows better performance in predicting fretting fatigue lives from the conventional fatigue data, and less scattering within fretting fatigue data with different contact geometries.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.103-104
• /
• 2023

In this study, the correlation between the rheolog y parameter of fresh concrete and the rheology parameter of wet sieving mortar was analyzed for analyzing to possibility predicting the rheology parameter of fresh concrete. Through the experiment, the dynamic yield stress and plastic viscosity of concrete and wet sieving mortar show a direct proportional relationship, and the two data had a correlation. Therefore, it is thought that it is possible to predict the rheology parameter of fresh concrete through the rheology parameter of wet sieving mortar. However, in order to more accurately predict the rheology parameter of fresh concrete, it is need additional relationship analysis by collecting more rheology parameter data of fresh concrete and wet sieving mortar.