Steel and Composite Structures

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Dynamic instability region analysis of sandwich piezoelectric nano-beam with FG-CNTRCs face-sheets based on various high-order shear deformation and nonlocal strain gradient theory

  • Arefi, Mohammad (Department of Solid Mechanics, Faculty of Mechanical Engineering, University of Kashan) ;
  • Pourjamshidian, Mahmoud (Department of Solid Mechanics, Faculty of Mechanical Engineering, University of Kashan) ;
  • Arani, Ali Ghorbanpour (Department of Solid Mechanics, Faculty of Mechanical Engineering, University of Kashan)
  • Received : 2018.01.30
  • Accepted : 2018.11.28
  • Published : 2019.07.25
⟨ Previous Next ⟩

Abstract

In this research, the dynamic instability region (DIR) of the sandwich nano-beams are investigated based on nonlocal strain gradient elasticity theory (NSGET) and various higher order shear deformation beam theories (HSDBTs). The sandwich piezoelectric nano-beam is including a homogenous core and face-sheets reinforced with functionally graded (FG) carbon nanotubes (CNTs). In present study, three patterns of CNTs are employed in order to reinforce the top and bottom face-sheets of the beam. In addition, different higher-order shear deformation beam theories such as trigonometric shear deformation beam theory (TSDBT), exponential shear deformation beam theory (ESDBT), hyperbolic shear deformation beam theory (HSDBT), and Aydogdu shear deformation beam theory (ASDBT) are considered to extract the governing equations for different boundary conditions. The beam is subjected to thermal and electrical loads while is resting on Visco-Pasternak foundation. Hamilton principle is used to derive the governing equations of motion based on various shear deformation theories. In order to analysis of the dynamic instability behaviors, the linear governing equations of motion are solved using differential quadrature method (DQM). After verification with validated reference, comprehensive numerical results are presented to investigate the influence of important parameters such as various shear deformation theories, nonlocal parameter, strain gradient parameter, the volume fraction of the CNTs, various distributions of the CNTs, different boundary conditions, dimensionless geometric parameters, Visco-Pasternak foundation parameters, applied voltage and temperature change on the dynamic instability characteristics of sandwich piezoelectric nano-beam.

Keywords

References

  1. Ait Amar Meziane, M., Abdelaziz, H.H. and Tounsi, A. ( 2014 ), "An efficient and simple refined theory for buckling and free vibration of exponentially graded sandwich plates under various boundary conditions", J. Sandw. Struct. Mater., 16(3), 293-318. https://doi.org/10.1177/1099636214526852
  2. Amine, Z., Houari, M.S.A., Bousahla, A.A. and Tounsi, A. (2015), "A mechanical response of functionally graded nanoscale beam: an assessment of a refined nonlocal shear deformation theory beam theory", Struct. Eng. Mech., Int. J., 54(4), 693-710. https://doi.org/10.12989/sem.2015.54.4.693
  3. Ansari, R., Faghih Shojaei, M., Mohammadi, V., Gholami, R. and Sadeghi, S. (2014a), "Nonlinear forced vibration analysis of functionally graded carbon nanotube-reinforced composite Timoshenko beams", Compos. Struct., 113, 316-327. https://doi.org/10.1016/j.compstruct.2014.03.015
  4. Ansari, R., Shojaei, M.F., Mohammadi, V., Gholami, R. and Darabi, M.A. (2014b), "Nonlinear vibrations of functionally graded mindlin microplates based on the modified couple stress theory", Compos. Struct., 114, 124-134. https://doi.org/10.1016/j.compstruct.2014.04.013
  5. Ansari, R., Mohammadi, V., Faghih Shojaei, M., Gholami, R. and Sahmani, S. (2014c), "On the forced vibration analysis of Timoshenko nanobeams based on the surface stress elasticity theory", Compos. Part B: Eng., 60, 158-166. https://doi.org/10.1016/j.compositesb.2013.12.066
  6. Arefi, M. (2016), "Analysis of wave in a functionally graded magneto-electro-elastic nano-rod using nonlocal elasticity model subjected to electric and magnetic potentials", Acta Mech., 227, 2529-2542. https://doi.org/10.1007/s00707-016-1584-7
  7. Arefi, M. and Allam, M.N.M. (2015), "Nonlinear responses of an arbitrary FGP circular plate resting on the Winkler-Pasternak foundation", Smart. Struct. Syst., Int. J., 16(1), 81-100. https://doi.org/10.12989/sss.2015.16.1.081
  8. Arefi, M. and Zenkour, A.M. (2017a), "Transient analysis of a three-layer microbeam subjected to electric potential", Int. J. Smart. Nano. Mater., 8(1), 20-40. https://doi.org/10.1080/19475411.2017.1292967
  9. Arefi, M. and Zenkour, A.M. (2017b), "Size-dependent free vibration and dynamic analyses of piezo-electro-magnetic sandwich nanoplates resting on viscoelastic foundation", Phys B: Cond. Matt., 521, 188-197. https://doi.org/10.1016/j.physb.2017.06.066
  10. Arefi, M. and Zenkour, A.M. (2017c), "Electro-magneto-elastic analysis of a three-layer curved beam", Smart Struct. Syst., Int. J., 19(6), 695-703.
  11. Arefi, M. and Zenkour, A.M. (2017d), "Influence of magneto-electric environments on size-dependent bending results of three-layer piezomagnetic curved nanobeam based on sinusoidal shear deformation theory", J. Sandw. Struct. Mater. DOI: 1099636217723186
  12. Arefi, M. and Zenkour, A.M. (2017e), "Effect of thermo-magneto-electro-mechanical fields on the bending behaviors of a three-layered nanoplate based on sinusoidal shear-deformation plate theory", J. Sandw. Struct. Mater. DOI: 1099636217697497
  13. Arefi, M. and Zenkour, A.M. (2017f), "Size dependent vibration and bending analyses of the piezomagnetic three-layer nanobeams", Appl. Phys. A, Mater. Sci. Processing.
  14. Arefi, M. and Zenkour, A.M. (2017g), "Thermo-electro-mechanical bending behavior of sandwich nanoplate integrated with piezoelectric face-sheets based on trigonometric plate theory", Compos. Struct., 162, 108-122. https://doi.org/10.1016/j.compstruct.2016.11.071
  15. Arefi, M. and Zenkour, A.M. (2017h), "Transient sinusoidal shear deformation formulation of a size-dependent three-layer piezo-magnetic curved nanobeam", Acta. Mech., 228(10), 3657-3674. https://doi.org/10.1007/s00707-017-1892-6
  16. Arefi, M. and Zenkour, A.M. (2017i), "Vibration and bending analysis of a sandwich microbeam with two integrated piezo-magnetic face-sheets", Compos. Struct., 159, 479-490. https://doi.org/10.1016/j.compstruct.2016.09.088
  17. Arefi, M. and Zenkour, A.M. (2017j), "Wave propagation analysis of a functionally graded magneto-electro-elastic nanobeam rest on Visco-Pasternak foundation", Mech. Res. Commun., 79, 51-62. https://doi.org/10.1016/j.mechrescom.2017.01.004
  18. Arefi, M. and Zenkour, A.M. (2018), "Employing the coupled stress components and surface elasticity for nonlocal solution of wave propagation of a functionally graded piezoelectric Love nanorod model", J. Intel. Mater. Syst. Struct., 28(17), 2403-2413. https://doi.org/10.1177/1045389X17689930
  19. Arefi, M., Pourjamshidian, M. and Ghorbanpour Arani, A. (2017), "Application of nonlocal strain gradient theory and various shear deformation theories to nonlinear vibration analysis of sandwich nano-beam with FG-CNTRCs face-sheets in electro-thermal environment", Appl. Phys. A, 123, 323. https://doi.org/10.1007/s00339-017-0922-5
  20. Arefi, M. Zamani, M.H. and Kiani, M. (2018), "Size-dependent free vibration analysis of three-layered exponentially graded nanoplate with piezomagnetic face-sheets resting on Pasternak's foundation", J. Intel. Mater. Syst. Struct., 29(5), 774-786. https://doi.org/10.1177/1045389X17721039
  21. Arvin, H. and Bakhtiari-Nejad, F. (2013), "Nonlinear free vibration analysis of rotating composite Timoshenko beams", Compos. Struct., 96, 29-43. https://doi.org/10.1016/j.compstruct.2012.09.009
  22. Ashrafi, B. and Hubert, P. (2006), "Vengallatore S. Carbon nanotube-reinforced composites as structural materials for microactuators in microelectromechanical systems", Nanotechnol., 17, 4895-4903. https://doi.org/10.1088/0957-4484/17/19/019
  23. Bennoun, M., Sid Ahmed Houari, M. and Tounsi, A. (2016), "A novel five variable refined plate theory for vibration analysis of functionally graded sandwich plates", Mech. Adv. Mater. Struct., 23(4), 423-431. https://doi.org/10.1080/15376494.2014.984088
  24. Boukhari, A., Hassen, A.A., Tounsi, A. and Hassan, S. (2016), "An efficient shear deformation theory for wave propagation of functionally graded material plates", Struct. Eng. Mech., Int. J., 57(5), 837-859. https://doi.org/10.12989/sem.2016.57.5.837
  25. Bousahla, A.A., Benyoucef, S., Tounsi, A. and Hassan, S. (2016), "On thermal stability of plates with functionally graded coefficient of thermal expansion ", Struct. Eng. Mech., Int. J., 60(2), 313-335 . https://doi.org/10.12989/sem.2016.60.2.313
  26. Chen, L.-W., Lin, C.-Y. and Wang, C.-C. (2002), "Dynamic stability analysis and control of a composite beam with piezoelectric layers", Compos. Struct., 56, 97-109. https://doi.org/10.1016/S0263-8223(01)00183-0
  27. Ebrahimy, F. and Hosseini, S.-H. (2016), "Nonlinear electroelastic vibration analysis of NEMS consisting of double-viscoelastic nanoplates", Appl. Phys. A, 122(10), 922. https://doi.org/10.1007/s00339-016-0452-6
  28. El-Haina, F., Bakora, A., Anis Bousahla, A. and Tounsi, A. (2017), "A simple analytical approach for thermal buckling of thick functionally graded sandwich plates ", Struct. Eng. Mech., Int. J., 63(5), 585-595.
  29. Eringen, A.C. (1983), "On differential equations of nonlocal elasticity and solutions of screw dislocation and surface waves", J. Appl. Phys., 54(9), 4703-4710. https://doi.org/10.1063/1.332803
  30. Esawi, A. and Farag, M. (2007), "Carbon nanotube reinforced composites: potential and current challenges", Mater. Des., 28, 2394-2401. https://doi.org/10.1016/j.matdes.2006.09.022
  31. Fantuzzia, N., Tornabenea, F., Bacciocchia, M. and Dimitri, R. (2017), "Free vibration analysis of arbitrarily shaped Functionally Graded Carbon Nanotube-reinforced plates", Compos. Part B: Eng., 115, 384-408. https://doi.org/10.1016/j.compositesb.2016.09.021
  32. Fu, Y., Wang, J. and Mao, Y. (2012), "Nonlinear analysis of buckling, free vibration and dynamic stability for the piezoelectric functionally graded beams in thermal environment", Appl. Math. Model., 36, 4324-4340. https://doi.org/10.1016/j.apm.2011.11.059
  33. Ghorbani Shenas, A., Malekzadeh, P. and Ziaee, S. (2017), "Vibration analysis of pre-twisted functionally graded carbon nanotube reinforced composite beams in thermal environment", Compos. Struct., 162(15), 325-340. https://doi.org/10.1016/j.compstruct.2016.12.009
  34. Ghorbanpour Arani, A., Kolahchi, R., Mosallaie Barzoki, A.A., Mozdianfard, M.R. and Noudeh Farahani, M. (2012a), "Elastic foundation effect on nonlinear thermo-vibration of embedded double-layered orthotropic graphene sheets using differential quadrature method", Proceedings of the Institution of Mechanical Engineers, Part C: J. Mech. Eng. Sci., 1-18.
  35. Ghorbanpour Arani, A., Vossough, H., Kolahchi, R. and Mosallaie Barzoki, A.A. (2012b), "Electro-thermo nonlocal nonlinear vibration in an embedded polymeric piezoelectric micro plate reinforced by DWBNNTs using DQM", J. Mech. Sci. Technol., 26(10), 3047-3057. https://doi.org/10.1007/s12206-012-0816-6
  36. Ghorbanpour Arani, A., Roudbari, M.A. and Amir, S. (2012c), "Nonlocal vibration of SWBNNT embedded in bundle of CNTs under a moving nanoparticle", Physica B, 407, 3646-3653. https://doi.org/10.1016/j.physb.2012.05.043
  37. Ghorbanpour Arani, A., Vossough, H. and Kolahchi, R. (2015a), "Nonlinear vibration and instability of a visco-Pasternak coupled double-DWBNNTs-reinforced microplate system conveying microflow", J. Mech. Eng. Sci., 1-17.
  38. Ghorbanpour Arani, A., Kolahchi, R. and Zarei, M.S. (2015b), "Visco-surface-nonlocal piezoelasticity effects on nonlinear dynamic stability of graphene sheets integrated with ZnO sensors and actuators using refined zigzag theory", Compos. Struct., 132(15), 506-526. https://doi.org/10.1016/j.compstruct.2015.05.065
  39. Hichem, B., Benrahou, K.H., Bousahla, A.A. and Tounsi, A. (2017), "A nonlocal zeroth-order shear deformation theory for nonlinear postbuckling of nanobeams", Struct. Eng. Mech., Int. J., 62(6), 695-702.
  40. Kanani, A.S., Niknam, H., Ohadi, A.R. and Aghdam, M.M. (2014), "Effect of nonlinear elastic foundation on large amplitude free and forced vibration of functionally graded beam", Compos. Struct., 115, 60-68. https://doi.org/10.1016/j.compstruct.2014.04.003
  41. Ke, L.-L., Yang, J. and Kitipornchai, S. (2010), "Nonlinear free vibration of functionally graded carbon nanotube-reinforced composite beams", Compos. Struct., 92, 676-683. https://doi.org/10.1016/j.compstruct.2009.09.024
  42. Khetir, H., Bouiadjra, M.B., Houari, M.S.A. and Tounsi, A. (2017), "A new nonlocal trigonometric shear deformation theory for thermal buckling analysis of embedded nanosize FG plates", Struct. Eng. Mech., Int. J., 64(4), 391-402.
  43. Kolahchi, R. and Moniri Bidgoli, A.M. (2016), "Size-dependent sinusoidal beam model for dynamic instability of single-walled carbon nanotubes", Appl. Math. Mech. -Engl. Ed., 37(2), 265-274. https://doi.org/10.1007/s10483-016-2030-8
  44. Kolahchi, R., Safari, M. and Esmailpour, M. (2016), "Dynamic stability analysis of temperature-dependent functionally graded CNT-reinforced visco-plates resting on orthotropic elastomeric medium", Compos. Struct., 150, 255-265. https://doi.org/10.1016/j.compstruct.2016.05.023
  45. Komijani, M., Esfahani, S.E., Reddy, J.N., Liu, Y.P. and Eslami, M.R. (2014), "Nonlinear thermal stability and vibration of pre/post-buckled temperature-and microstructure-dependent functionally graded beams resting on elastic foundation", Compos. Struct., 112, 292-307. https://doi.org/10.1016/j.compstruct.2014.01.041
  46. Li, L. and Hu, Y. (2016), "Wave propagation in fluid-conveying viscoelastic carbon nanotubes based on nonlocal strain gradient theory", Comput. Mater. Sci., 112, 282-288. https://doi.org/10.1016/j.commatsci.2015.10.044
  47. Li, J., Wu, Z., Kong, X., Li, X. and Wu, W. (2014), "Comparison of various shear deformation theories for free vibration of laminated composite beams with general lay-ups", Compos. Struct., 108, 767-778. https://doi.org/10.1016/j.compstruct.2013.10.011
  48. Li, L., Hu, Y. and Ling, L. (2015), "Wave propagation in viscoelastic single-walled carbon nanotubes with surface effect under magnetic field based on nonlocal strain gradient theory", Physica E, 75, 118-124. https://doi.org/10.1016/j.physe.2015.09.028
  49. Liew, K.M., Yang, J. and Kitipornchai, S. (2003), "Postbuckling of piezoelectric FGM plates subject to thermo-electro-mechanical loading", Int. J. Solids Struct., 40, 3869-3892. https://doi.org/10.1016/S0020-7683(03)00096-9
  50. Liew, K.M., Hu, Y.G. and He, X.Q. (2008), "Flexural wave propagation in single-walled carbon nanotubes", J. Comput. Theor. Nanosci., 5(4), 581-586. https://doi.org/10.1166/jctn.2008.019
  51. Maraghi, Z.K., Ghorbanpour Arani, A., Kolahchi, R., Amir, S. and Bagheri, M.R. (2013), "Nonlocal vibration and instability of embedded DWBNNT conveying viscose fluid", Compos.: Part B, 45, 423-432. https://doi.org/10.1016/j.compositesb.2012.04.066
  52. Mohammadimehr, M., Rousta Navi, B. and Ghorbanpour Arani, A. (2015), "Free vibration of viscoelastic double-bonded polymeric nanocomposite plates reinforced by FG-SWCNTs using MSGT, sinusoidal shear deformation theory and meshless method", Compos. Struct., 131, 654-671. https://doi.org/10.1016/j.compstruct.2015.05.077
  53. Natarajan, S., Haboussi, M. and Manickam, G. (2014), "Application of higher-order structural theory to bending and free vibration analysis of sandwich plates with CNT reinforced composite", Compos. Struct., 113, 197-207. https://doi.org/10.1016/j.compstruct.2014.03.007
  54. Rafiee, M., Yang, J. and Kitipornchai, S. (2013), "Large amplitude vibration of carbon nanotube reinforced functionally graded composite beams with piezoelectric layers", Compos. Struct., 96, 716-725. https://doi.org/10.1016/j.compstruct.2012.10.005
  55. Rafiee, M., He, X.Q. and Liew, K.M. (2014), "Non-linear dynamic stability of piezoelectric functionally graded carbon nanotube-reinforced composite plates with initial geometric imperfection", Int. J. Non-Linear Mech., 59, 37-51. https://doi.org/10.1016/j.ijnonlinmec.2013.10.011
  56. Reddy, J.N. (2007), "Nonlocal theories for bending, buckling and vibration of beams", Int. J. Eng. Sci., 45, 288-307. https://doi.org/10.1016/j.ijengsci.2007.04.004
  57. Reddy, J.N. and El-Borgi, S. (2014), "Eringen's nonlocal theories of beams accounting for moderate rotations", Int. J. Eng. Sci., 82, 159-177. https://doi.org/10.1016/j.ijengsci.2014.05.006
  58. Shen, H.-S. and Zhang, C.-L. (2012), "Non-linear analysis of functionally graded fiber reinforced composite laminated plates, Part I: Theory and solutions", Int. J. Non-Linear Mech., 47, 1045-1054. https://doi.org/10.1016/j.ijnonlinmec.2012.05.005
  59. Simsek, M. and Reddy, J.N. (2013a), "A unified higher order beam theory for buckling of a functionally graded microbeam embedded in elastic medium using modified couple stress theory", Compos. Struct., 101, 47-58. https://doi.org/10.1016/j.compstruct.2013.01.017
  60. Simsek, M. and Reddy, J.N. (2013b), "Bending and vibration of functionally graded microbeams using a new higher order beam theory and the modified couple stress theory", Int. J. Eng. Sci., 64, 37-53. https://doi.org/10.1016/j.ijengsci.2012.12.002
  61. Tornabene, F., Fantuzzi, N., Ubertini, F. and Viola, E. (2014a), "Strong formulation finite element method based on differential quadrature: a survey", Appl. Mech. Rev., 67, 020801. https://doi.org/10.1115/1.4028859
  62. Tornabene, F., Fantuzzi, N. and Bacciocchi, M. (2014b), "The strong formulation finite element method: stability and accuracy", Frattura ed Integrita Strutturale, 29, 251-265.
  63. Tornabene, F., Fantuzzi, N., Bacciocchi, M. and Viola, E. (2016), "Effect of agglomeration on the natural frequencies of functionally graded carbon nanotube-reinforced laminated composite doubly-curved shells", Compos. Part B: Eng., 89, 187-218. https://doi.org/10.1016/j.compositesb.2015.11.016
  64. Tornabene, F., Fantuzzi, N. and Bacciocchi, M. (2017), "Linear static response of nanocomposite plates and shells reinforced by agglomerated carbon nanotubes", Compos. Part B: Eng., 115, 449-476. https://doi.org/10.1016/j.compositesb.2016.07.011
  65. Wu, H., Kitipornchai, S. and Yang, J. (2017), "Imperfection sensitivity of thermal post-buckling behaviour of functionally graded carbon nanotube-reinforced composite beams", Appl. Math. Model., 42, 735-752. https://doi.org/10.1016/j.apm.2016.10.045
  66. Xua, R. and Wu, Y. (2007), "Static, dynamic, and buckling analysis of partial interaction composite members using Timoshenko's beam theory", Int. J. Mech. Sci., 49, 1139-1155. https://doi.org/10.1016/j.ijmecsci.2007.02.006
  67. Yahia, S.A., Hassen, A.A., Mohammed Sid Ahmed, H. and Tounsi, A. (2015), "Wave propagation in functionally graded plates with porosities using various higher-order shear deformation plate theories", Struct. Eng. Mech., Int. J., 53(6), 1143-1165. https://doi.org/10.12989/sem.2015.53.6.1143
  68. Yang, Y. and Lim, C.W. (2012), "Non-classical stiffness strengthening size effects for free vibration of a nonlocal nanostructure", Int. J. Mech. Sci., 54, 57-68. https://doi.org/10.1016/j.ijmecsci.2011.09.007
  69. Zhang, Z.J. and Paulino, G.H. (2007), "Wave propagation and dynamic analysis of smoothly graded heterogeneous continua using graded finite elements", Int. J. Solids Struct., 44(11), 3601-3626. https://doi.org/10.1016/j.ijsolstr.2005.05.061
  70. Zidi, M., Tounsi, A., Sid Ahmed Houari, M., Adda Bedia, E.-A. and Anwar Beg, O. (2014), "Bending analysis of FGM plates under hygro-thermo-mechanical loading using a four variable refined plate theory", Aerosp. Sci. Tech., 34, 24-34. https://doi.org/10.1016/j.ast.2014.02.001

Cited by

  1. On the mechanics of nanocomposites reinforced by wavy/defected/aggregated nanotubes vol.38, pp.5, 2019, https://doi.org/10.12989/scs.2021.38.5.533