DOI QR코드

DOI QR Code

Lateral performance of CRCS connections with tube plate

  • Jafari, Rahman (Civil Engineering Department, University of Science and Culture) ;
  • Attari, Nader K.A. (Structural Engineering Department, Road, Housing, and Urban Development Research Center) ;
  • Nikkhoo, Ali (Civil Engineering Department, University of Science and Culture) ;
  • Alizadeh, Saeid (Civil Engineering Department, University of Canterbury)
  • Received : 2018.06.24
  • Accepted : 2019.05.22
  • Published : 2019.07.10

Abstract

This paper presents experimental and analytical studies to evaluate the cyclic behaviour of Circular Reinforced Concrete column Steel beam (CRCS) connections. Two 3/4-scale CRCS specimens are tested under quasi-static reversed cyclic loading. Specimens were strengthened with a tube plate (TP) and a steel doubler plate (SDP). Furthermore; nine interior beam-through type RCS connections are simulated using nonlinear three-dimensional finite element method using ABAQUS software and are verified with experimental results. The results revealed that using the TP improves the performance of the panel zone by providing better confinement to the concrete. Utilizing the TP at the panel zone may absorb and distribute stress in this region. Results demonstrate that TP can be used instead of SDP. Test records indicate that specimens with TP, with and without SDP maintained their maximum strength up to 4% drift angle, satisfying the recommendation given by AISC341-2016 for composite special moment-resisting frames.

Keywords

References

  1. ABAQUS (2010), Abaqus analysis user's manual-version 6.10-1. Pawtucket, RI: Hibbit, Karlsson & Sorenson.
  2. Alizadeh, S., Attari, N.K.A. and Kazemi, M.T. (2013), "The seismic performance of new detailing for RCS connections", J. Construct. Steel Res., 91, 76-88. https://doi.org/10.1016/j.jcsr.2013.08.010
  3. Alizadeh, S., Attari, N.K.A. and Kazemi, M.T. (2015), "Experimental investigation of RCS connections performance using self-consolidated concrete", J. Construc. Steel Res., 114, 204-216. https://doi.org/10.1016/j.jcsr.2015.07.026
  4. ANSI/AISC 341-16 (2016), Seismic Provisions for Structural Steel Buildings, American Institute of Steel Construction.
  5. ASCE41-17 (2017), American Society of Civil Engineers, seismic evaluation and Upgrade of existing buildings, Reston, Virginia.
  6. ASCE Task Committee on Design Criteria for Composite Structures in Steel and Concrete (1994), Guidelines for design of joints between steel beams and reinforced concrete columns, J. Struct. Eng. ASCE, 120(8), 2330-2357. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:8(2330)
  7. ASTM A572/A572M-12 (2012), Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel.
  8. ASTM A615/A615M-12 (2012), Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement.
  9. Comite Euro-International du Beton (CEB-FIP Model Code 1990), International Recommendation for the Design and Construction of Concrete Structures. Thomas Telford, UK.
  10. Cordova, P. and Deierlein, G.G. (2005), "Validation of the seismic performance of composite RCS framed: full-scale testing, analytical modeling, and seismic design", Report No. 155; Department of Civil and Environmental Engineering, Stanford University, CA, USA.
  11. Ghods, S., Kheyroddin, A., Nazeryan, M., Mirtaheri, S.M. and Gholhaki, M. (2016), "Nonlinear behavior of connections in RCS frames with bracing and steel plate shear wall", Steel Compos. Struct., Int. J., 22(4), 915-935. http://dx.doi.org/10.12989/scs.2016.22.4.915
  12. Kanno, R. (1993), "Strength, deformation, and seismic resistance of joints between steel beams and reinforced concrete columns", Ph.D. Dissertation; Cornell University, Ithaca, NY, USA.
  13. Men, J., Guo, Z. and Shi, Q. (2015a), "Experimental research on seismic behavior of novel composite RCS joints", Steel Compos. Struct., Int. J., 19(1), 209-221. http://dx.doi.org/10.12989/scs.2015.19.1.209
  14. Men, J., Zhang, Y., Guo, Z. and Shi, Q. (2015b), "Experimental research on seismic behavior of composite RCS frame", Steel Compos. Struct., Int. J., 18(4), 971-983. http://dx.doi.org/10.12989/scs.2015.18.4.971
  15. Nguyen, X.H., Nguyen, Q.H., Le, D.D. and Mirza, O. (2017), "Experimental study on seismic performance of new RCS connection", Structures, 9(1), 53-62. https://doi.org/10.1016/j.istruc.2016.09.006
  16. Nishiyama, I., Kuramoto, H. and Noguchi, H. (2004), "Guidelines: seismic design of composite reinforced concrete and steel buildings", J. Struct. Eng. ASCE, 130(2), 336-342. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:2(336)
  17. Parra-Montesinos, G. and Wight, J.K. (2001), "Modeling shear behavior of hybrid RCS beam-column connections", J. Struct. Eng. ASCE, 127(1), 3-11. https://doi.org/10.1016/j.jcsr.2013.08.010
  18. Sheikh, T.M., Deierlein, G.G., Yura, J.A. and Jirsa, J.O. (1989), "Beam-column moment connections for composite frames, part 1", J. Struct. Eng. ASCE, 115(11), 2858-2876. https://doi.org/10.1061/(ASCE)0733-9445(1989)115:11(2858)
  19. Thai, H.T., Uy, B. and Aslani, F. (2017), "Behaviour of bolted endplate composite joints to square and circular CFST columns", J. Constr. Steel Res., 131, 68-82. https://doi.org/10.1016/j.jcsr.2016.12.022
  20. Zhang, X., Zhang, J., Gong, X. and Zhang, S. (2017), "Seismic performance of prefabricated high-strength concrete tube column-steel beam joints", Adv. Struct. Eng., 21(5), 658-674. https://doi.org/10.1177/1369433217726895

Cited by

  1. Simplified method for modeling reinforced concrete column-steel beam connections with tube plate vol.23, pp.11, 2019, https://doi.org/10.1177/1369433220906224