DOI QR코드

DOI QR Code

Removal of iron oxide scale from feed-water in thermal power plant using superconducting magnetic separation

  • Nishijima, S. (Fukui University of Technology)
  • 투고 : 2019.03.04
  • 심사 : 2019.06.18
  • 발행 : 2019.06.30

초록

The superconducting magnetic separation system has been developing to separate the iron oxide scale from the feed water of the thermal power plant. The accumulation in the boiler lowers the heat exchange rate or in the worst case damages it. For this reason, in order to prevent scale generation, controlling pH and redox potential is employed. However, these methods are not sufficient and then the chemical cleaning is performed regularly. A superconducting magnetic separation system is investigated for removing iron oxide scale in a feed water system. Water supply conditions of the thermal power plant are as follows, flow rate 400 t / h, flow speed 0.2 m / s, pressure 2 MPa, temperature $160-200^{\circ}C$, amount of scale generation 50 - 120 t / 2 years. The main iron oxide scale is magnetite (ferromagnetic substance) and its particle size is several tens ${\mu}m$. As the first step we are considering to introduce the system to the chemical cleaning process of the thermal power plant instead of the thermal power plant itself. The current status of development will be reported.

키워드

CJJOCB_2019_v21n2_22_f0001.png 이미지

Fig. 1. Feed-water system and location of separator.

CJJOCB_2019_v21n2_22_f0002.png 이미지

Fig. 2. Flow speed dependency of Separation efficiency of membrane filter and high gradient superconducting magnet separation.

CJJOCB_2019_v21n2_22_f0003.png 이미지

Fig. 3. Chemical cleaning line.

CJJOCB_2019_v21n2_22_f0004.png 이미지

Fig. 4. Superconducting magnet used in this work and magnetic field density distribution.

CJJOCB_2019_v21n2_22_f0005.png 이미지

Fig. 5. Magnetic filter stack before (a) and after (b) experiment.

TABLE I CHARACTERISTICS OF SCALE FROM DIFFERENT TEMPERATURE.

CJJOCB_2019_v21n2_22_t0001.png 이미지

TABLE II CONDITIONS OF CHEMICAL CLEANING LINE AND HIGH PRESSURE FEED WATER HEATED DRAIN.

CJJOCB_2019_v21n2_22_t0002.png 이미지

참고문헌

  1. Greenhouse Gas Inventory Office of Japan, "National Greenhouse Gas Inventory Report of Japan," 2018.
  2. E. Imamura, M. Iuchi and S. Bando, "Comprehensive Assessment of Life Cycle CO2 Emissions form Power Generation Technologies in Japan," CRIEPI Research Report, vol. Y06, 2016.
  3. M. Siddhartha Bhatt, "Effect of water side deposits on the energy performance of coal fired power plants," Energy Conversion and Management, vol. 47, pp. 1247-1263, 2006. https://doi.org/10.1016/j.enconman.2005.07.002
  4. CRIEIPI Environmental Science Research Laboratory, "Optimization of chemical cleaning time of supercritical pressure boiler," CRIEPI Research Report, vol. 206, pp. 73-74, 1980.
  5. H. Okada, K. Imamura, N. Hirota, et al., "Development of a Magnetic Separation System of Boiler Feedwater Scale in Thermal Power Plants," IEEE Trans. Appl. Supercond., vol. 26, no. 3, pp. 3701505, 2016.
  6. N. Nizuno, F. Mishima, et al., "Removal of iron oxide with superdonducting magnet high gradient magnetic separation form feed-water in thermal Plant," IEEE Trans. Appl. Supercond., vol. 25, no. 3, pp. 3700804, 2015.
  7. T. Kiyoshi, S. Matsumoto, et al., "Cryocooler-cooled split-paired magnet for anisotropic conductive sheet production," IEEE Trans. Appl. Supercond., vol. 16, no. 2, pp. 1134-1137, 2006. https://doi.org/10.1109/TASC.2006.871344