Geomechanics and Engineering

  • 제18권3호
  • /
  • Pages.291-298
  • /
  • 2019
  • /
  • 2005-307X(pISSN)
  • /
  • 2092-6219(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Study on the mechanical properties test and constitutive model of rock salt

  • Zhao, Baoyun (School of Civil Engineering and Architecture, Chongqing University of Science and Technology) ;
  • Huang, Tianzhu (School of Civil Engineering and Architecture, Chongqing University of Science and Technology) ;
  • Liu, Dongyan (School of Civil Engineering and Architecture, Chongqing University of Science and Technology) ;
  • Liu, Yang (School of Civil Engineering and Architecture, Chongqing University of Science and Technology) ;
  • Wang, Xiaoping (School of Civil Engineering and Architecture, Chongqing University of Science and Technology) ;
  • Liu, Shu (Graduate Office, Chongqing University of Science and Technology) ;
  • Yu, Guibao (Graduate Office, Chongqing University of Science and Technology)
  • 투고 : 2019.01.19
  • 심사 : 2019.06.04
  • 발행 : 2019.06.30
⟨ 이전 논문 다음 논문 ⟩

초록

In order to study the mechanical properties of rock salt, triaxial compression tests under different temperatures and confining pressure are carried out on rock salt specimens, the influence of temperature and confining pressure on the mechanical properties of rock salt was studied. The results show that the temperature has a deteriorative effect on the mechanical properties of rock salt. With the increase of temperature, the peak stress of rock salt decreases visibly; the plastic deformation characteristics become much obvious; the internal friction angle increases; while the cohesion strength decreases. With the increase of confining pressure, the peak stress and peak strain of rock salt will increase under the same temperature. Based on the test data, the Duncan-Chang constitutive model was modified, and the modified Duncan-Chang rock salt constitutive model considering the effect of temperature and confining pressure was established. The stress-strain curve calculated by the modified model was compared with the stress-strain curve obtained from the test. The close match between the test results and the model prediction suggests that the modified Duncan-Chang constitutive model is accurate in describing the behavior of rock slat under different confining pressure and temperature conditions.

키워드

과제정보

연구 과제 주관 기관 : Chongqing Municipal Education Commission

참고문헌

  1. Bottcher, N., Gorke, U.J., Kolditz, O. and Nagel, T. (2017), "Thermo-mechanical investigation of salt caverns for short-term hydrogen storage", Environ. Earth Sci., 76, 98. https://doi.org/10.1007/s12665-017-6414-2.
  2. Chen, J., Kang, Y.F., Liu, W., Fan, J.Y., Jiang, D.Y. and Chemenda, A. (2018), "Self-healing capacity of damaged rock salt with different initial damage", Geomech. Eng., 15(1), 615-620. https://doi.org/10.12989/gae.2018.15.1.615.
  3. Duncan, J.M. and Chang, C.Y. (1970), "Nonlinear analysis of stress and strain in soils", J. Soil Mech. Found. Div., 96(5), 1629-1653. https://doi.org/10.1061/JSFEAQ.0001458
  4. Guo, Y.T., Yang, C.H. and Fu, J.J. (2014), "Experimental research on mechanical characteristics of salt rock under triaxial unloading test", Rock Soil Mech., 33(3), 725-730,738. https://doi.org/10.3969/j.issn.1000-7598.2012.03.012.
  5. Hunsche, U. and Albrecht, H. (1990), "Results of true triaxial strength tests on rock salt", Eng. Fract. Mech., 35(4-5), 867-877. https://doi.org/10.1016/0013-7944(90)90260-N.
  6. Jiang, Y.D., Xian, X.F. and Su, J. (2005), "Research on distortion of singlerock and constitutive relation", Rock Soil Mech., 26(6), 941-945. https://doi.org/10.1007/s11769-005-0030-x.
  7. Khaledi, K., Mahmoudi, E., Datcheva, M. and Schanz, T. (2016), "Analysis of compressed air storage caverns in rock salt considering thermo-mechanical cyclic loading", Environ. Earth Sci., 75(15), 1149. https://doi.org/10.1007/s12665-016-5970-1.
  8. Li, H.R., Yang, C.H., Liu, Y.G., Chen, F. and Ma, H.L. (2014), "Experimental study of ultrasonic velocity and acoustic emission properties of salt rock under uniaxial compression load", Chin. J. Rock Mech. Eng., 33(10), 2107-2116. https://doi.org/10.11779/CJGE201410020.
  9. Li, P., Deng, J.C., Zhao, W.L. and Feng, Y.C. (2012), "An experimental study on creep characteristics of salt rock and gypsum-salt rock in Puguang gas field", Petrol. Sci. Technol., 30(16), 1715-1724. https://doi.org/10.1080/10916466.2010.523742.
  10. Li, Z., Ma, H.L. and Yao, Y.F. (2013), "A preliminary study on basic mechanical properties of rock salt at high temperature and high pressure", Chin. J. Undergr. Sp. Eng., 9(5), 981-985.
  11. Mahmoudi, E., Khaledi, K., von Blumenthal, A., Konig, D. and Schanz, T. (2016), "Concept for an integral approach to explore the behavior of rock salt caverns under thermo-mechanical cyclic loading in energy storage systems", Environ. Earth Sci., 75(14), 1069. https://doi.org/10.1007/s12665-016-5850-8.
  12. Mei, G.X., Chen, Q.M. and Jiang, P.M. (2010), "Stress-strain relationship of unsaturated cohesive soil", J. Central South Univ. Technol., 17(3), 653-657. https://doi.org/10.1007/s11771-010-0536-y.
  13. Mohamadi, M. and Richard, G.W. (2016), "Strength and post-peak response of Colorado shale at high pressure and temperature", Int. J. Rock Mech. Min. Sci., 84, 34-46. https://doi.org/10.1016/j.ijrmms.2015.12.012.
  14. Moradi, S.S.T., Nikolaev, N.I., Chudinova I.V. and Martel, A.S. (2018), "Geomechanical study of well stability in high-pressure, high-temperature conditions", Geomech. Eng., 16(3), 331-339. http://doi.org/10.12989/gae.2018.16.3.331.
  15. Rossi, E., Kant, M.A., Madonna, C., Saar, M.O. and Rohr, P.R.V. (2018), "The effects of high heating rate and high temperature on the rock strength: Feasibility study of a thermally assisted drilling method", Rock Mech. Rock Eng., 51(9), 2957-2964. https://doi.org/10.1007/s00603-018-1507-0.
  16. Sheinin, V.I. and Blokhin, D.I. (2012), "Fractures of thermomechanical effects in rock salt sample under uniaxial compression", Geomechanics, 48(1), 39-45. https://doi.org/10.1134/s1062739148010054.
  17. Sriapai, T., Walsri, C. and Fuenkajorn, K. (2012), "Effect of temperature on compressive and tensile strengths of salt", Sci. Asia, 38(2), 166-174. https://doi.org/10.2306/scienceasia1513-1874.2012.38.166.
  18. Wang, H. and Lin, H. (2018), "Non-linear shear strength criterion for a rock joint with consideration of friction variation", Geotech. Geol. Eng., 36(6), 3731-3741. https://doi.org/10.1007/s10706-018-0567-y.
  19. Wang, Z.L., Shi, H. and Wang, J.G. (2018), "Mechanical behavior and damage constitutive model of granite under coupling of temperature and dynamic loading", Rock Mech. Rock Eng., 51(10), 3045-3059. https://doi.org/10.1007/s00603-018-1523-0.
  20. Wu, G., Wan, Y., Swift, G. and Chen, J. (2013), "Laboratory investigation of the effects of temperature on the mechanical properties of sandstone", Geotech. Geol. Eng., 31(2), 809-816. https://doi.org/10.1007/s10706-013-9614-x.
  21. Xu, Y.H. and Xu, X.L. (2017), "Study on damage constitutive model of rock under high temperature", J. Guangxi Univ. Nat. Sci. Ed., 42(1), 226-235. https://doi.org/10.13624/j.cnki.issn.1001-7445.2017.0226.
  22. Zhang, G.M., Li, Y.P., Yang, C.H. and Daemen, J.J.K. (2014), "Stability and tightness evaluation of bedded rock salt formations for underground gas/oil storage", Acta Geotechnica, 9(1), 161-179. https://doi.org/10.1007/s11440-013-0227-6.
  23. Zhang, P., Mishra, B. and Heasley, K.A. (2015), "Experimental investigation on the influence of high pressure and high temperature on the mechanical properties of deep reservoir rocks", Rock Mech. Rock Eng., 48(6), 2197-2211. https://doi.org/10.1007/s00603-015-0718-x.
  24. Zhou, S.W., Xia, C.C., Zhao, H.B., Mei, S.H. and Zhou, Y. (2017), "Statistical damage constitutive model for rocks subjected to cyclic stress and cyclic temperature", Acta Geophysica, 65(5), 893-906. https://doi.org/10.1007/s11600-017-0073-2.

피인용 문헌

  1. Mechanical properties and damage constitutive model for uniaxial compression of salt rock at different loading rates vol.30, pp.5, 2019, https://doi.org/10.1177/1056789520983868