DOI QR코드

DOI QR Code

Suggestion of Multi-Electrode Type Electronic Paper Film to Can be Used as a Transparent Display

투명 디스플레이로써 활용 가능한 다수전극형 전자종이 필름 제안

  • Lee, Sang-il (Department of Electronic Engineering, Incheon national University) ;
  • Hong, Youn-Chan (Department of Electronic Engineering, Incheon national University) ;
  • Kim, Young-cho (Department of Electronic Engineering, Chungwoon University)
  • Received : 2019.02.14
  • Accepted : 2019.04.08
  • Published : 2019.07.01

Abstract

A multiple-electrode-type electronic paper film can implement a single color and control the transparency, as it has multiple electrodes in one cell. Therefore, it can be used as a transparent display. In this paper, we explain the structure and driving method of a transparent electronic paper display, and then propose a control method of transmittance. Subsequently, we verify the theory by measuring the transmittance via experiment. Thus, by changing the manner of applying the voltage to three lower electrodes and one upper electrode, transmittance in eight cases could be realized. It was confirmed that the transmittance derived from the experiment could be controlled from a minimum of 6.75% to a maximum of 71.18%.

Keywords

JJJRCC_2019_v32n4_296_f0001.png 이미지

Fig. 1. Types of transparent displays using flat panel displays.

JJJRCC_2019_v32n4_296_f0002.png 이미지

Fig. 2. Electrode placement of multi-electrode type electronic paper display.

JJJRCC_2019_v32n4_296_f0003.png 이미지

Fig. 3. Method for controlling the transmittance of a multiple electrode type electronic paper film.

JJJRCC_2019_v32n4_296_f0004.png 이미지

Fig. 4. How to measure transmittance.

JJJRCC_2019_v32n4_296_f0005.png 이미지

Fig. 5. Transmittance measurement result.

JJJRCC_2019_v32n4_296_f0006.png 이미지

Fig. 6. Microphotograph of sample with different transmittance.

JJJRCC_2019_v32n4_296_f0007.png 이미지

Fig. 7. The image of the opposite side was observed by varying the transmittance.

Table 1. Aperture ratio according to driving method.

JJJRCC_2019_v32n4_296_t0001.png 이미지

References

  1. R. Sakurai, S. G. Lee, W. K Cho, B. G. Ryu, and M. B. Song, IMID Digest, 5, 423 (2005).
  2. J. Heikenfeld, P. Drzaic, J. S. Yeo, and T. Koch, J. Soc. Inf. Disp., 19, 129 (2011). [DOI: https://doi.org/10.1889/jsid19.2.129]
  3. H. Koga, M. Nogi, N. Komoda, T. T. Nge, T. Sugahara, and K. Suganuma, NPG Asia Mater., 6, e93 (2014). [DOI:https://doi.org/10.1038/am.2014.9]
  4. W.K.T. Coltro, D. P. de Jesus, J.A.F. da Silva, C. L. do Lago, and E. Carrilho, Electrophoresis, 31, 2487 (2010). [DOI:https://doi.org/10.1002/elps.201000063]
  5. H. K. Park, J. Korea Des. Knowl., 28, 33 (2013). [DOI:https://doi.org/10.17246/jkdk.2013..28.004]
  6. J. M. Sim and S. H. You, Journal of Integrated Design Research, 2, 9 (2016).
  7. B. S. Moon and S. H. You, Archives of Design Research, 2, 183 (2014).
  8. D. J. Lee, R. E. Sloper, Y. H. Jeon, S. K. Han, S. Lee, K. H. Choi, W. Huh, and Y. C. Kim, Dig. Tech. Pap. - Soc. Inf. Disp. Int. Symp., 42, 1523 (2011). [DOI: https://doi.org/10.1889/1.3621149]
  9. H. L. Kang, C. A. Kim, S. I. Lee, Y. K. Shin, Y. H. Lee, Y. C. Kim, and B. K. Ju, J. Disp. Technol., 12, 747 (2016). [DOI: https://doi.org/10.1109/jdt.2016.2524023]
  10. D. J. Lee, Y. M. Oh, S. W. Park, B. E. Park, and Y. C. Kim, J. Disp. Technol., 8, 361 (2012). [DOI: https://doi.org/10.1109/jdt.2012.2190135]
  11. D. J. Lee and Y. C. Kim, J. Disp. Technol., 9, 972 (2013). [DOI: https://doi.org/10.1109/jdt.2013.2273125]
  12. Y. K. Shin and Y. C. Kim, J. Korean Inst. Electr. Electron. Mater. Eng., 28, 524 (2015). [DOI: https://doi.org/10.4313/JKEM.2015.28.8.524]
  13. S. I. Lee, Y. C. Hong, and Y. C. Kim, J. Korean Inst. Electr. Electron. Mater. Eng., 29, 231 (2016). [DOI: https://doi.org/10.4313/JKEM.2016.29.4.231]
  14. S. I. Lee, Y. C. Hong, and Y. C. Kim, J. Korean Inst. Electr. Electron. Mater. Eng., 31, 171 (2018). [DOI: https://doi.org/10.4313/JKEM.2018.31.3.171]
  15. Y. K. Shin and Y. C. Kim, J. Korean Inst. Electr. Electron. Mater. Eng., 28, 21 (2015). [DOI: https://doi.org/10.4313/JKEM.2015.28.1.21]