DOI QR코드

DOI QR Code

Safety Evaluation of the Precast Half Deck Pannel Joints Reinforced by Connection Rebar

이음철근이 보강된 반단면 프리캐스트 판넬 이음부의 강도 안전성 평가

  • 황훈희 (한국도로협회 기술연구센터)
  • Received : 2019.03.19
  • Accepted : 2019.04.15
  • Published : 2019.04.30

Abstract

The Half-depth precast deck is a structural system that utilizes pre-cast panels pre-built at the factory as formwork at the construction stage and as a major structural member at the same time after completion. These systems have joints between segments, and the detail and performance of the joints are factors that have a very large impact on the quality, such as the constructability and durability of the bridge decks. In this study, strength performance evaluation was performed for improved joints using connecting rebar by experimental method. Static loading tests were conducted on the test specimen with improved joint, those with existing joint and those without joint. The test results of the specimens were compared to each other, and the flexural strength required by the design was compared. The flexural strength required in the design was presented by finite element analysis. It has been shown that the flexural strength of the specimens with joints were more than twice that required by the design. But the flexural strength of the specimen with existing joint was about 84% of that without joint. The flexural strength of the specimen with improved joints was a nearly similar degree of that compared to the specimen without joint. And a comparison of the moment-deflection relationship curves of the two specimens also shows a very similar flexural behavior. It is confirmed that improved joint has sufficient flexural strength. In addition to strength, the bridge decks require serviceability, such as deflection and cracking, and in particular, fatigue resistance due to repetitive live loads is an important performance factor. Therefore, further verification studies are required.

Keywords

HOJHB0_2019_v34n2_40_f0001.png 이미지

Fig. 1. Moment distribution for longitudinal direction by FEM.

HOJHB0_2019_v34n2_40_f0002.png 이미지

Fig. 2. Details of RC specimen.

HOJHB0_2019_v34n2_40_f0003.png 이미지

Fig. 3. Details of Half-depth precast deck Specimens.

HOJHB0_2019_v34n2_40_f0004.png 이미지

Fig. 4. Static test of the specimens.

HOJHB0_2019_v34n2_40_f0005.png 이미지

Fig. 5. Failure of RC specimen.

HOJHB0_2019_v34n2_40_f0006.png 이미지

Fig. 6. Failure of LBH16 specimen.

HOJHB0_2019_v34n2_40_f0007.png 이미지

Fig. 7. Failure of LBH16H10 specimen.

HOJHB0_2019_v34n2_40_f0008.png 이미지

Fig. 8. Moment-deflection relationship of RC specimen.

HOJHB0_2019_v34n2_40_f0009.png 이미지

Fig. 9. Moment-deflection relationship of LBH16 specimen.

HOJHB0_2019_v34n2_40_f0010.png 이미지

Fig. 10. Moment-deflection relationship of LBH16H10 specimen.

HOJHB0_2019_v34n2_40_f0011.png 이미지

Fig. 11. Moment-deflection relationship of all specimens.

HOJHB0_2019_v34n2_40_f0012.png 이미지

Fig. 12. Load-strain relationship of RC specimens.

HOJHB0_2019_v34n2_40_f0013.png 이미지

Fig. 13. Load-strain relationship of LBH16 specimens.

HOJHB0_2019_v34n2_40_f0014.png 이미지

Fig. 14. Load-strain relationship of LBH16H10 specimens.

HOJHB0_2019_v34n2_40_f0015.png 이미지

Fig. 15. Load-strain relationship of the connecting rebar.

Table. 1. Summary of specimens

HOJHB0_2019_v34n2_40_t0001.png 이미지

References

  1. D. W. Kim and C. S. Shim, "Structural Performance of Pre-tensioned Half-depth Precast Panels", Journal of the Korean Society of Civil Engineers, Vol. 34, No. 6, pp. 1707-1721, 2014. https://doi.org/10.12652/Ksce.2014.34.6.1707
  2. C. S. Shim, K. Y. Choi and S. P. Chang, "Design of Transverse Joints in Composite Bridges with Precast Decks", Journal of Korea Society of Civil Engineers, Vol. 5, No. 1, pp. 17-27, 2001.
  3. H. K. Ryu, Y. J. Kim and S. P. Chang, "Experimental Study on Static and Fatigue Strength of Loop Joints", Journal of Engineering Structures, Elsevier, Vol. 29, Issue 2, pp. 145-162, 2007. https://doi.org/10.1016/j.engstruct.2006.04.014
  4. I. Rosenthal and J. Shimoni, "Bending Behavior of a Doubleloop Connection between Precast Concrete Slabs.", Concrete International, Vol. 6, Issue 11, pp. 30-34, 1984.
  5. D. H. Shin, S. J. Park, H. C. Oh, I. G. Kim and Y. J. Kim, "Evaluation on Flexural Performance of Precast Bridge Decks with Ribbed Connection.", Journal of the Korean Institute for Structural Maintenance and Inspection, Vol. 19, No. 3, pp. 1-9, 2015.
  6. H. H. Hwang and S. Y. Park, "A Study on the Flexural Behavior of Lap-spliced Cast-In-Place Joints under Static Loading in Ultra-High Performance Concrete Bridge Deck Slabs.", Canadian Journal of Civil Engineering, Vol. 41, No. 7, 2014.
  7. C. H. Chung, Y. E. Sung, B. H. Hyun and S. J. Park, "Experimental Study on Connectability of Half-Depth Deck Panels with Loop Joint.", Journal of Korean Society of Civil Engineers., Vol. 28, No. 4A, pp. 581-590, 2008.
  8. H. H. Hwang and S. Y. Park, "Structural Safety Evaluation for Static Strength of Thin Plate RC Member with High Strength Concrete", Journal of The Korean Society of Safety, Vol. 32, No. 5, pp. 69-75, 2017. https://doi.org/10.14346/JKOSOS.2017.32.5.69
  9. H. J. Lee, Y. W. Lee and C. H. Chung, "Evaluation of Structural Performance of RC Deck Slabs by High-Strength Concrete", Journal of The Korean Society of Safety, Vol. 31, No. 3, pp. 89-95, 2016. https://doi.org/10.14346/JKOSOS.2016.31.3.89
  10. Ministry of Land, Infrastructure and Transport, "KDS 24 14 21 Concrete Bridge Design Code(Limit State Design) in 2016", Korea Construction Standards Center, 2016.
  11. H. J. Lee, Y. W. Lee and C. H. Chung, "Study on the Minimum Thickness of Long Span Decks", Journal of Korean Society of Civil Engineers, Vol. 23, No. 5, pp. 851-857, 2003.
  12. H. H. Hwang and C. B. Joh, "Minimum Thickness of RC Deck Slab for a Composite Two-Girder Bridge Considering Serviceability and Contructability", Journal of Korean Society of Civil Engineers, Vol. 25, No. 6, pp. 981-988, 2005.