Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

Design Analysis of Substructure for Offshore Wind Pile Excavation

해상풍력 파일 굴착직경 결정을 위한 하부구조물 설계해석

  • Lee, Gi-Ok (ICT Convergence Ship And Marine Research Institute, Kunsan National University) ;
  • Sun, Min-Young (Department of Mechanical Design Engineering, ChonBuk National University)
  • 이기옥 (ICT 군산대학교 융합조선해양연구원) ;
  • 선민영 (전북대학교 기계설계공학부)
  • Received : 2019.02.18
  • Accepted : 2019.03.16
  • Published : 2019.04.30
Download PDF
⟨ Previous Next ⟩

Abstract

With recent rapid increases in the power generation capacity of offshore wind power generators, reliable structural analysis of the large-scale infrastructure needed to install wind power generators at sea is required. Therefore, technology for heavy marine equipment such as barges and excavation equipment is needed. Under submarine conditions, rock drilling technology to install the substructure for offshore wind pile excavation is a very important factor in supporting a wind farm safely under dynamic loads over periods of at least 20 years. After investigating the marine environment and on-site ground excavation for the Saemangeum offshore wind farm, in this study we suggest.

Keywords

References

  1. Sun, M. Y., Lee, S. B., Lee, K. Y., Moon, B. Y., "The study on substructure design and analysis for 5MW offshore wind turbine," Journal of the Korean Society of Marine Engineering, Vol. 38, No. 9, pp. 1075-1080, 2014. https://doi.org/10.5916/jkosme.2014.38.9.1075
  2. Jeon, J. D., Jeon, E. C., "Optimize Design for 5MW Offshore Wind Turbine Sub-structure Jack-up Platform," The Korean Society of Manufacturing Process Engineers, Vol. 11, No. 6, pp. 115-122, 2012.
  3. Frank, R., Bauduin, C., Driscoll, R., Kavvadas, M., Krebs Ovesen, N., Orr, T., Schuppener, B., Designers' guide to EN 1997-1 Eurocode 7: Geotechnical design-General rules, ThomasTelford, pp. 19-47, 2004.
  4. De Normalizacion, C. E., EN 1993-1-1: Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings, European Committee for Standardization, pp. 15-48, 2005.
  5. DNV-GL, DNVGL-ST-0126: Support Structures for Wind Turbines, DNV-GL, pp. 65-72, 2016.
  6. Choi, Y. H., Kang, M. G., Park, S. H., "Seismic Qualification Analysis of a Small Savonius Style Vertical Axis Wind Turbine," The Korean Society of Manufacturing Process Engineers, Vol. 17, No. 1, pp. 122-129, 2018. https://doi.org/10.14775/ksmpe.2018.17.1.122
  7. Choi, Y. H., Hong, M. G., "Seismic Qualification Analysis of a Vertical-Axis Wind Turbine," The Korean Society of Manufacturing Process Engineers, Vol. 15, No. 3, pp. 21-27, 2016. https://doi.org/10.14775/ksmpe.2016.15.3.021
  8. Chen, I. W., Wong, B. L., Chau, S. W., Huang, H. H., "Design and Analysis of Jacket Substructures for Offshore Wind Turbines," Energies, Vol. 9, No. 4, pp. 5, 2016.
  9. DNV-GL, Fatigue Design Of Offshore Steel Structures, DNV-GL, pp. 12-16, 2012.
  10. DNV-GL, Design of Offshore Wind Turbine Structures (DNV-OS-J101), DNV-GL, pp. 99-139, 2014.