Earthquakes and Structures

  • 제16권4호
  • /
  • Pages.437-453
  • /
  • 2019
  • /
  • 2092-7614(pISSN)
  • /
  • 2092-7622(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Optimum design of viscous dampers to prevent pounding of adjacent structures

  • Karabork, Turan (Aksaray University, Engineering Faculty, Department of Civil Engineering) ;
  • Aydin, Ersin (Nigde Omer Halisdemir University, Engineering Faculty, Department of Civil Engineering)
  • 투고 : 2019.01.24
  • 심사 : 2019.03.15
  • 발행 : 2019.04.25
⟨ 이전 논문 다음 논문 ⟩

초록

This study investigates a new optimal placement method for viscous dampers between structures in order to prevent pounding of adjacent structures with different dynamic characteristics under earthquake effects. A relative displacement spectrum is developed in two single degree of freedom system to reveal the critical period ratios for the most risky scenario of collision using El Centro earthquake record (NS). Three different types of viscous damper design, which are classical, stair and X-diagonal model, are considered to prevent pounding on two adjacent building models. The objective function is minimized under the upper and lower limits of the damping coefficient of the damper and a target modal damping ratio. A new algorithm including time history analyses and numerical optimization methods is proposed to find the optimal dampers placement. The proposed design method is tested on two 12-storey adjacent building models. The effects of the type of damper placement on structural models, the critical period ratios of adjacent structures, the permissible relative displacement limit, the mode behavior and the upper limit of damper are investigated in detail. The results of the analyzes show that the proposed method can be used as an effective means of finding the optimum amount and location of the dampers and eliminating the risk of pounding.

키워드

참고문헌

  1. Abdeddaim, M., Ounis, A., Djedoui, N. and Shrimali, M.K. (2016), "Pounding hazard mitigation between adjacent planar buildings using coupling strategy", Struct. Control Hlth. Monit., 6, 603-617.
  2. Abdullah, M.M., Hanif, J.H., Richardson, A. and Sobanjo, J. (2001), "Use of a shared tuned mass damper (STMD) to reduce vibration and pounding in adjacent structures", Earthq. Eng. Struct. Dyn., 30, 1185-1201. https://doi.org/10.1002/eqe.58
  3. Aldemir, U. and Aydin, E. (2005), "An active control algorithm to prevent the pounding of adjacent structures", Vib. Prob. ICOVP, 33-38.
  4. Amini, F. and Ghaderi, P. (2013), "Hybridization of harmony search and ant colony optimization for optimal locating of structural dampers", Appl. Soft. Comput., 13, 2272-2280. https://doi.org/10.1016/j.asoc.2013.02.001
  5. Anagnostopoulos, S.A. (1995), "Earthquake induced pounding: state of the art", Proceedings of the 10th Europ. Conf. on Earth. Eng., 897-905.
  6. Aydin, E. (2013), "A simple damper optimization algorithm for both target added damping ratio and interstorey drift ratio", Earthq. Struct., 5(1), 083-109. https://doi.org/10.12989/eas.2013.5.1.083
  7. Aydin, E., Boduroglu, M.H. and Guney, D. (2007), "Optimal damper distribution for seismic rehabilitation of planar building structures", Eng. Struct., 29, 176-185. https://doi.org/10.1016/j.engstruct.2006.04.016
  8. Basili, M. and De Angelis, M. (2007), "Optimal passive control of adjacent structures interconnected with nonlinear hysteretic devices", J. Sound Vib., 301, 106-125. https://doi.org/10.1016/j.jsv.2006.09.027
  9. Bekdas, G. and Nigdeli, S.M. (2012), "Preventing the pounding of adjacent buildings with harmony search optimized tuned mass damper", 3rd Euro. Conf. of Civ. Eng., Paris, France.
  10. Bharti, S.D., Dumne, S.M. and Shrimali, M.K. (2010), "Seismic response analysis of adjacent buildings connected with MR dampers", Eng. Struct., 32, 2122-2133. https://doi.org/10.1016/j.engstruct.2010.03.015
  11. Bhaskararao, A.V. and Jangid, R.S. (2006), "Seismic response of adjacent buildings connected with friction dampers", Bull. Earthq. Eng., 4(1), 43-64. https://doi.org/10.1007/s10518-005-5410-1
  12. Bigdeli, K., Hare, W. and Tesfamariam, S. (2012), "Configuration optimization of dampers for adjacent buildings under seismic excitations", Eng. Optim., 44(12), 1491-1509. https://doi.org/10.1080/0305215X.2012.654788
  13. Chau, K.T., Wei, X.X., Guo, X. and Shen, C.Y. (2003), "Experimental and theoretical simulations of seismic poundings between two adjacent structures", Earthq. Eng. Struct. Dyn., 32, 537-554. https://doi.org/10.1002/eqe.231
  14. Chouw, N. and Hao, H. (2012), "Pounding damage to buildings and bridges in the 22 February 2011 Christchurch earthquake", Int. J. Protec. Struct., 3(2), 123-139. https://doi.org/10.1260/2041-4196.3.2.123
  15. Cundumi, O. and Suarez, L.E. (2008), "Numerical investigation of a variable damping semiactive device for the mitigation of the seismic response of adjacent structures", Comput. Aid. Civil Infrastr. Eng., 23, 291-308. https://doi.org/10.1111/j.1467-8667.2007.00537.x
  16. Garcia, D.L. and Soong, T.T. (2009), "Assessment of the separation necessary to prevent seismic pounding between linear structural systems", Prob. Eng. Mech., 24, 210-223. https://doi.org/10.1016/j.probengmech.2008.06.002
  17. Hameed, A., Saleem, M., Qazi, A.U., Saeed, S. and Bashir, M.A. (2012), "Mitigation of seismic pounding between adjacent buildings", Pak. J. Sci., 64(4), 326-333.
  18. Hameed, M., Tsuji, M. and Takewaki, I. (2013), "Smart passive control of buildings with higher redundancy and robustness using base-isolation and inter-connection", Earthq. Struct., 4(6), 649-670. https://doi.org/10.12989/eas.2013.4.6.649
  19. Hong, H.P., Wang, S.S. and Hong, P. (2003), "Critical building separation distance in reducing pounding risk under earthquake excitation", Struct. Saf., 25, 287-303. https://doi.org/10.1016/S0167-4730(02)00080-2
  20. Jankowski, R. (2008), "Earthquake-induced pounding between equal height buildings with substantially different dynamic properties", Eng. Struct., 30(10), 2818-2829. https://doi.org/10.1016/j.engstruct.2008.03.006
  21. Jankowski, R. and Mahmoud, S. (2015), Earthquake-Induced Structural Pounding, Springer, Switzerland.
  22. Jeng, V., Kasai, K. and Maison, B.F. (1992), "A spectral difference method to estimate building separations to avoid pounding", Earthq. Spectra, 8(2), 201-223. https://doi.org/10.1193/1.1585679
  23. Karayannis, C.G. and Favvata, M.J. (2005), "Earthquake-induced interaction between adjacent reinforced concrete structures with non-equal heights", Earthq. Eng. Struct. Dyn., 34(1), 1-20. https://doi.org/10.1002/eqe.398
  24. Khatiwada, S., Chouw, N. and Butterworth, J.W. (2014), "A generic structural pounding model using numerically exact displacement proportional damping", Eng. Struct., 62-63, 33-41. https://doi.org/10.1016/j.engstruct.2014.01.016
  25. Kim, J., Ryu, J. and Chung, L. (2006), "Seismic performance of structures connected by viscoelastic dampers", Eng. Struct., 28, 183-195. https://doi.org/10.1016/j.engstruct.2005.05.014
  26. Komodromos, P. (2008), "Simulation of the earthquake-induced pounding of seismically isolated buildings", Comput. Struct., 86, 618-626. https://doi.org/10.1016/j.compstruc.2007.08.001
  27. Lin, J.H. (1997), "Separation distance to avoid seismic pounding of adjacent buildings", Earthq. Eng. Struct. Dyn., 26(3), 395-403. https://doi.org/10.1002/(SICI)1096-9845(199703)26:3<395::AID-EQE655>3.0.CO;2-F
  28. Lin, J.H. and Weng, C.C. (2001), "Probability analysis of seismic pounding adjacent buildings", Earthq. Eng. Struct. Dyn., 30(10), 1539-1557. https://doi.org/10.1002/eqe.78
  29. Luco, J.E. and De Barros, F.C.P. (1998), "Optimal damping between two adjacent elastic structures", Earthq. Eng. Struct. Dyn., 27, 649-659. https://doi.org/10.1002/(SICI)1096-9845(199807)27:7<649::AID-EQE748>3.0.CO;2-5
  30. Mahmoud, S., Chen, X. and Jankowski, R. (2008), "Structural pounding models with hertz spring and nonlinear damper", J. App. Sci., 8(10), 1850-1858. https://doi.org/10.3923/jas.2008.1850.1858
  31. Matsagar, V.A. and Jangid, R.S. (2005), "Viscoelastic damper connected to adjacent structures involving seismic isolation", J. Civil Eng. Manage., 11(4), 309-322. https://doi.org/10.3846/13923730.2005.9636362
  32. Mazanoglu, E.C.K. and Mazanoglu, K. (2017), "An optimization study for viscous dampers between adjacent buildings", Mech. Syst. Signal Pr., 89, 88-96. https://doi.org/10.1016/j.ymssp.2016.06.001
  33. Mouzakis, H.P. and Papadrakakis, M. (2004), "Three dimensional nonlinear building pounding with friction during earthquakes", J. Earthq. Eng., 8(1), 107-132. https://doi.org/10.1080/13632460409350483
  34. Muthukumar, S. and DesRoches, R. (2006), "A Hertz contact model with non-linear damping for pounding simulation", Earthq. Eng. Struct. Dyn., 35, 811-828. https://doi.org/10.1002/eqe.557
  35. Park, K.S. and Ok, S.Y. (2015), "Hybrid control approach for seismic coupling of two similar adjacent structures", J. Sound Vib., 349, 1-17. https://doi.org/10.1016/j.jsv.2015.03.028
  36. Patel, C.C. and Jangid, R.S. (2010), "Seismic response of dynamically similar adjacent structures connected with viscous dampers", IES J. Part A: Civil Struct. Eng., 3(1), 1-13. https://doi.org/10.1080/19373260903236833
  37. Patel, C.C. and Jangid, R.S. (2014), "Dynamic response of identical adjacent structures connected by viscous damper", Struct. Control Hlth. Monit., 21, 205-224. https://doi.org/10.1002/stc.1566
  38. Penzien, J. (1997), "Evaluation of building separation distance required to prevent pounding during strong earthquakes", Earthq. Eng. Struct. Dyn., 26(8), 849-858. https://doi.org/10.1002/(SICI)1096-9845(199708)26:8<849::AID-EQE680>3.0.CO;2-M
  39. Polycarpou, P.C. and Komodromos, P. (2010), "Earthquakeinduced poundings of a seismically isolated building with adjacent structures", Eng. Struct., 32, 1937-1951. https://doi.org/10.1016/j.engstruct.2010.03.011
  40. Quinonero, F.P., Massegu, J.R., Rossell, J.M. and Karimi, H.R. (2012), "Semiactive-passive structural vibration control strategy for adjacent structures under seismic excitation", J. Frank. Inst., 349, 3003-3026. https://doi.org/10.1016/j.jfranklin.2012.09.005
  41. Quinonero, F.P., Massegu, J.R., Rossell, J.M. and Karimi, H.R. (2014), "Vibration control for adjacent structures using local state information", Mechatron., 24, 336-344. https://doi.org/10.1016/j.mechatronics.2013.08.001
  42. Raheem, S.E.A. (2006), "Seismic pounding between adjacent building structures", Electr. J. Struct. Eng., 6, 66-74.
  43. Rajaram, C. and Kumar, R.P. (2015), "Calculation of separation distance between adjacent buildings: a review on codal provisions", J. Seismol. Earthq. Eng., 17(1), 31-42.
  44. Rosenblueth, E. and Meli, R. (1986), "The 1985 earthquake: causes and effects in Mexico City", Concrete Int., 8(5), 23-34.
  45. Schexnayder, C., Alarcon, L.F., Antillo, E.D., Morales, B.C. and Lopez, M. (2014), "Observations on bridge performance during the Chilean earthquake of 2010", J. Constr. Eng. Manage., 140(4), B4013001-1-6.
  46. Shakya, K. and Wijeyewickrema, A.C. (2009), "Mid-column pounding of multi-story reinforced concrete buildings considering soil effects", Adv. Struct. Eng., 12(1), 71-85. https://doi.org/10.1260/136943309787522687
  47. Soltysik, B., Falborski, T. and Jankowski, R. (2017), "Preventing of earthquake-induced pounding between steel structures by using polymer elements: experimental study", Proc. Eng., 199, 278-283. https://doi.org/10.1016/j.proeng.2017.09.029
  48. Sonmez, M., Aydin, E. and Karabork, T. (2013), "Using an artificial bee colony algorithm for the optimal placement of viscous dampers in planar building frames", Struct. Multi. Optim., 48, 395-409. https://doi.org/10.1007/s00158-013-0892-y
  49. Stavroulakis, G.E. and Abdalla, K.M. (1991), "Contact between adjacent structures", J. Struct. Eng., 117(10), 2838-2850. https://doi.org/10.1061/(ASCE)0733-9445(1991)117:10(2838)
  50. Takewaki, I. (1997), "Optimal damper placement for minimum transfer functions", Earthq. Eng. Struct. Dyn., 26, 1113-1124. https://doi.org/10.1002/(SICI)1096-9845(199711)26:11<1113::AID-EQE696>3.0.CO;2-X
  51. Takewaki, I. (2000), "Optimal damper placement for planar building frames using transfer functions", Struct. Multi. Optim., 20, 280-287. https://doi.org/10.1007/s001580050158
  52. Tubaldi, E., Barbato, M. and Ghazizadeh, S. (2012), "A probabilistic performance-based risk assessment approach for seismic pounding with efficient application to linear systems", Struct. Saf., 36-37, 14-22. https://doi.org/10.1016/j.strusafe.2012.01.002
  53. Turkish Building Earthquake Code (2019), Prime Ministry, Disaster and Emergency Management Presidency, AFAD, Turkey.
  54. Uz, M.E. and Hadi, M.N.S. (2014), "Optimal design of semi active control for adjacent buildings connected by MR damper based on integrated fuzzy logic and multi-objective genetic algorithm", Eng. Struct., 69, 135-148. https://doi.org/10.1016/j.engstruct.2014.03.006
  55. Valles-Mattox, V.E. and Reinhorn, A.M. (1996), "Evaluation, prevention and mitigation of pounding effects in building structures", Eleven. World Conf. Earthq. Eng., Paper No. 26.
  56. Wolfram Research (2003), Mathematica Edition Version 5.0, Wolfram Research, Champaign, Illinois.
  57. Xu, Y.L. and Zhang, W.S. (2002), "Closed-form solution for seismic response of adjacent buildings with linear quadratic Gaussian controllers", Earthq. Eng. Struct. Dyn., 31, 235-259. https://doi.org/10.1002/eqe.107
  58. Xu, Y.L., He, Q. and Ko, J.M. (1999), "Dynamic response of damper-connected adjacent buildings under earthquake excitation", Eng. Struct., 21,135-148. https://doi.org/10.1016/S0141-0296(97)00154-5
  59. Yang, Z., Xu, Y.L. and Lu, X.L. (2003), "Experimental seismic study of adjacent buildings with fluid dampers", J. Struct. Eng., 129(2), 197-205. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:2(197)
  60. Ying, Z.G., Ni, Y.Q. and Ko, J.M. (2003), "Stochastic optimal coupling-control of adjacent building structures", Comput. Struct., 81, 2775-2787. https://doi.org/10.1016/S0045-7949(03)00332-8
  61. Yu, Z.W., Liu, H.Y., Guo, W. and Liu, Q. (2017), "A general spectral difference method for calculating the minimum safety distance to avoid the pounding of adjacent structures during earthquakes", Eng. Struct., 150, 646-655. https://doi.org/10.1016/j.engstruct.2017.07.068
  62. Zhang, W.S. and Xu, Y.L. (1999), "Dynamic characteristics and seismic response of adjacent buildings linked by discrete dampers", Earthq. Eng. Struct. Dyn., 28(10),1163-1185. https://doi.org/10.1002/(SICI)1096-9845(199910)28:10<1163::AID-EQE860>3.0.CO;2-0
  63. Zhu, H., Wen, Y. and Iemura, H. (2001), "A study on interaction control for seismic response of parallel structures", Comput. Struct., 79, 231-242. https://doi.org/10.1016/S0045-7949(00)00119-X
  64. Zhu, H.P. and Xu, Y.L. (2005), "Optimum parameters of Maxwell model defined damper used to link adjacent structures", J. Sound Vib., 279, 253-274. https://doi.org/10.1016/j.jsv.2003.10.035
  65. Zhu, H.P., Ge, D.D. and Huang, X. (2011), "Optimum connecting dampers to reduce the seismic responses of parallel structures", J. Sound Vib., 330, 1931-1949. https://doi.org/10.1016/j.jsv.2010.11.016

피인용 문헌

  1. A Design Method for Viscous Dampers Connecting Adjacent Structures vol.6, 2019, https://doi.org/10.3389/fbuil.2020.00025
  2. Dimensional pounding response analysis for adjacent inelastic MDOF structures based on modified Kelvin model vol.79, pp.3, 2019, https://doi.org/10.12989/sem.2021.79.3.347