Fig. 1. Demec strain gauge
Fig. 2. Flow according to the CSA contents
Fig. 3. Compressive strength according to the CSA contents
Fig. 4. Compressive strength ratio according to the CSA contents
Fig. 5. Rate of length change
Fig. 6. Absorption ratio
Fig. 7. Incremental void distribution volume
Fig. 8. Cumulative void volume
Table 1. Experiment plan and mix design
Table 4. Chemical compositions of raw Materials
Table 2. Physical properties and chemical composition of OPC and slag
Table 3. Physical properties and chemical composition of drystalline gypsum
참고문헌
- Kim, M.G., Kim, K.J., Jeong, G.C. (2018). Assessment of the cause and pathway of contamination and sustainability in an abandoned mine, The Journal of Engineering Geology, 28(3), 411-429 [in Korean]. https://doi.org/10.9720/kseg.2018.3.411
- Lee, S.E., Park, S.J., Kim, H.S., Jang, H.S., Kim, T.H. (2012). A study on the model test for mine filling using coal ash, Tunnel and Underground Space, 22(6), 449-461 [in Korean]. https://doi.org/10.7474/TUS.2012.22.6.449
- Kim, T.W., Hahm, H.G. (2012). Mechanical properties of the alkaliactivated slag mortar with gypsum, Journal of The Korea Institute for Structural Maintenance and Inspection, 16(3), 109-116 [in Korean]. https://doi.org/10.11112/jksmi.2012.16.3.109
- Sakai, E., Raina, K., Asaga, K., Goto, S., Kondo, R. (1980). Influence of sodium aromatic sulfonates on the hydration of tricalcium aluminate with or without gypsym, Cement and Concrete Research, 10(3), 311-319. https://doi.org/10.1016/0008-8846(80)90107-6
- Lee, H.W., Min, S.E., Lee, K.H., Kim, C.S., Eom, H.J. (2014). Characterization of high early strength type shrinkage reducing cement utilizing CSA expansion admixture of low-activity, Journal of Korean Recycled Construction Resources Institute, 9(2), 38-45 [in Korean].
- Kim, Y.U., Kim, D.B., Choi, S.J. (2018). An experimental study on the setting time and compressive strength of mortar using ferronickel slag powder, Journal of the Korea Institute of Building Construction, 18(6), 551-558 [in Korean]. https://doi.org/10.5345/JKIBC.2018.18.6.551
- Han, C.G., Lee, M.H., Park, Y.S., Pei, C.C. (2005). Physical properties of concrete with the contents of CSA expansive admixture, Magazine of the Korea Concrete Institute, 5, 369-372 [in Korean].
- Park, C.B., Ryu, D.H., Seo, C.H. (2012). Properties of high volume mineral admixtures concrete using inorganic additives, Journal of the Architectural Institute of Korea, 28(3), 631-637 [in Korean].
- Sung, C.J., Song, M.S., Lee, K.H., Han, C.G. (2002). Hydration of expansive materials with CSA-system, Journal of the Korea Concrete Institute, 14(5), 631-637 [in Korean]. https://doi.org/10.4334/JKCI.2002.14.5.631
- Cho, Y.K., Nam, S.Y., Kim, C.S., Lee, H.W., Jo, S.H., Ahn, J.W. (2018). Evaluation of physical properties of mine polymer liner and cover material containing re-emulsification type EVA resin, The Polymer Society Of Korea, 42(4), 637-642 [in Korean]. https://doi.org/10.7317/pk.2018.42.4.637
- Joo, M.K., Lho, B.C. (2015). Evaluation of properties of polymer-modified mortar with CSA, Journal of the Korea Institute for Structural Maintenance and Inspection, 19(1), 35-44 [in Korean]. https://doi.org/10.11112/jksmi.2015.19.1.035
- Song, H.S., Lee, C.Y., Min, C.S. (2007). Hydration of high volume mineral admixtures binder with kind of activators, Journal of the Korea Institute for Structural Maintenance Inspection, 11(1), 85-94 [in Korean].