Fig. 1. Typical condensation process flow diagram for polyester resin
Fig. 2. Utility flow diagram of condensation reaction process for polyester resin
Table 1. Hazard guide words for K-PSR
Table 2. Likehood (L) Criteria
Table 3. Severity (S) Criteria
Table 4. Risk (Severity and frequency matrix) Criteria (R)
Table 5. Risk assessment results by using K-PSR
참고문헌
- H. S. Lee, W. T. Kim, "A Study on Settlement Planning of PSM system in the Small and Meduim Sites", Korean Journal of Hazardous Materials, Vol. 5, No.1, pp. 90-97, June, 2017.
- J. M. Lee, J. H. Yoo, J. W. Ko, "A Study on Hazard Identification Method for Small and Medium Chemical Industries", Korea Chem. Eng. Res., Vol. 45, No.1, pp. 103-108, February, 2007.
- Ministry of Employment and Labor (MOEL) & Korea Occupational Safety&Health Agency (KOSHA), "Distribution of PSM site's degree in 2016", 2016.
- Korean Occupational Safety & Health Agency, "K-PSR Method Application", Technical Guide, pp, 111-2012, 2012.
- CCPS, "Guideline for Process Safety in Batch Reaction System", AIChE, New York, 1999.
- Korean Occupational Safety & Health Agency, "An Introduction to the Petrochemical Process Evaluation Technology", 2008.
- Korean Occupational Safety & Health Agency, "Technical guidelines for Hazard and Operability (HAZOP) of batch process", KOSHA GUIDE, P-86-2017, 2017.
- Korean Occupational Safety&Health Agency, "Technical guidelines for Hazard and Operability (HAZOP) of continuous process", 2012.
- Korean Occupational Safety&Health Agency, "Technical guideline for priority decision on Risk assessment", 2012
- J. M. Lee, J. H. Yoo, J. W. Ko, "Qualitative Hazard Analysis for LNG Gas Stations Using K-PSR Method", KIGAS, Vol. 45, No. 4, December, 2006.