Biomaterials and Biomechanics in Bioengineering

  • 제4권1호
  • /
  • Pages.9-20
  • /
  • 2019
  • /
  • 2465-9835(pISSN)
  • /
  • 2465-9959(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Small creatures can lift more than their own bodyweight and a human cannot-an explanation through structural mechanics

  • Balamonica, K (Department of Civil and Environmental Engineering, National University of Singapore) ;
  • Jothi Saravanan, T. (Department of Civil Engineering, Yokohama National University) ;
  • Bharathi Priya, C. (CSIR-Structural Engineering Research Center) ;
  • Gopalakrishnan, N. (CSIR- Central Building Research Institute)
  • 투고 : 2018.09.17
  • 심사 : 2019.02.28
  • 발행 : 2019.03.25
⟨ 이전 논문 다음 논문 ⟩

초록

Living beings are formed of advanced biological and mechanical systems which exist for millions of years. It is known that various animals and insects right from small ants to huge whales have different weight carrying capacities, which is generally expressed as a ratio of their own bodyweights i.e., Strength to Bodyweight Ratio (SBR). The puzzle is that when a rhinoceros beetle (scientific name: Dynastinae) can carry 850 times its own bodyweight, why a man cannot accomplish the same feat. There are intrinsic biological and mechanical reasons related to their capacities, as per biomechanics. Yet, there are underlining principles of engineering and structural mechanics which tend to solve this puzzle. The paper attempts to give a plausible answer for this puzzle through structural mechanics and experimental modeling techniques. It is based on the fact that smaller an animal or creature, it has larger value of weight lifting by self-weight ratio. The simple example of steel prism model discussed in this paper, show that smaller the physical model size, larger is its SBR value. To normalize this, the basic length of the model need to be considered and when multiplied with SBR, a constant is arrived. Hence, the aim of the research presented is to derive this constant on a pan-living being spectrum through size/scaling effect.

키워드

참고문헌

  1. Ahlborn, B.K. (2006), Zoological Physics: Quantitative Models of Body Design, Actions, and Physical Limitations of Animals, Springer Science & Business Media.
  2. Alexander, R.M. (1985), "The maximum forces exerted by animals", J. Exper. Biol., 115(1), 231-238. https://doi.org/10.1242/jeb.115.1.231
  3. Alexander, R.M. (1991), "Energy-saving mechanisms in walking and running", J. Exper. Biol., 160(1), 55-69. https://doi.org/10.1242/jeb.160.1.55
  4. Balcombe, J. (2009), "Animal pleasure and its moral significance", Appl. Anim. Behav. Sci., 118(3-4), 208-216. https://doi.org/10.1016/j.applanim.2009.02.012
  5. Bartholomew, G.A., Lighton, J.R. and Feener Jr, D.H. (1988), "Energetics of trail running, load carriage, and emigration in the column-raiding army ant eciton hamatum", Physiol. Zool., 61(1), 57-68. https://doi.org/10.1086/physzool.61.1.30163737
  6. Bazant, Z.P. (2005), Scaling of Structural Strength, Butterworth-Heinemann.
  7. Bazant, Z.P. and Cao, Z. (1987), "Size effect in punching shear failure of slabs", ACI Struct. J., 84(1), 44-53.
  8. Bazant, Z.P. and Kazemi, M.T. (1991), "Size dependence of concrete fracture energy determined by RILEM work-of-fracture method", Int. J. Fract., 51(2), 121-138. https://doi.org/10.1007/BF00033974
  9. Biewener, A.A. (1989). "Scaling body support in mammals: Limb posture and muscle mechanics", Sci., 245(4913), 45-48. https://doi.org/10.1126/science.2740914
  10. Broom, D.M. (2010), "Cognitive ability and awareness in domestic animals and decisions about obligations to animals", Appl. Anim. Behav. Sci., 126(1-2), 1-11. https://doi.org/10.1016/j.applanim.2010.05.001
  11. Carpinteri, A. and Pugno, N. (2005), "Are scaling laws on strength of solids related to mechanics or to geometry?", Nat. Mater., 4(6), 421. https://doi.org/10.1038/nmat1408
  12. Christman, M.C. and Leone, E.H. (2007), "Statistical aspects of the analysis of group size effects in confined animals", Appl. Anim. Behav. Sci., 103(3-4), 265-283. https://doi.org/10.1016/j.applanim.2006.05.020
  13. Federle, W., Rohrseitz, K. and Holldobler, B. (2000), "Attachment forces of ants measured with a centrifuge: Better 'wax-runners' have a poorer attachment to a smooth surface", J. Exper. Biol., 203(3), 505-512. https://doi.org/10.1242/jeb.203.3.505
  14. Garhammer, J. (1991), "A comparison of maximal power outputs between elite male and female weightlifters in competition", Int. J. Sport Biomech., 7(1), 3-11. https://doi.org/10.1123/ijsb.7.1.3
  15. Harris, H.G. and Sabnis, G.M. (1999), Structural Modeling and Experimental Techniques, CRC Press.
  16. Heethoff, M. and Koerner, L. (2007), "Small but powerful: Theoribatid mite archegozetes longisetosus Aoki (Acari, Oribatida) produces disproportionately high forces", J. Exper. Biol., 210(17), 3036-3042. https://doi.org/10.1242/jeb.008276
  17. Kram, R. (1996), "Inexpensive load carrying by rhinoceros beetles", J. Exper. Biol., 199(3), 609-612. https://doi.org/10.1242/jeb.199.3.609
  18. Kram, R. and Taylor, C.R. (1990), "Energetics of running: A new perspective", Nat., 346(6281), 265. https://doi.org/10.1038/346265a0
  19. Maloiy, G.M.O., Heglund, N.C., Prager, L.M., Cavagna, G.A. and Taylor, C.R. (1986), "Energetic cost of carrying loads: Have African women discovered an economic way?", Nat., 319(6055), 668. https://doi.org/10.1038/319668a0
  20. McMahon, T.A. (1975), "Using body size to understand the structural design of animals: Quadrupedal locomotion", J. Appl. Physiol., 39(4), 619-627. https://doi.org/10.1152/jappl.1975.39.4.619
  21. Nguyen, V., Lilly, B. and Castro, C. (2014), "The exoskeletal structure and tensile loading behavior of an ant neck joint", J. Biomech., 47(2), 497-504. https://doi.org/10.1016/j.jbiomech.2013.10.053
  22. Noyes, F.R. and Grood, E.S. (1976), "The strength of the anterior cruciate ligament in humans and rhesus monkeys", J. Bone Joint Surg., 58(8), 1074-1082. https://doi.org/10.2106/00004623-197658080-00006
  23. O'Neill, M.C., Umberger, B.R., Holowka, N.B., Larson, S.G. and Reiser, P.J. (2017), "Chimpanzee super strength and human skeletal muscle evolution", Proceedings of the National Academy of Sciences, 114(28), 7343-7348. https://doi.org/10.1073/pnas.1619071114
  24. Rochmat, T.A., Wibowo, S.B., Iswahyudi, S., Wiratama, C. and Kartika, W. (2018), "The flow visualization CFD studies of the fuselage and rolled-up vortex effects of the chengdu J-10-like fighter canard", Mod. Appl. Sci., 12(2), 148. https://doi.org/10.5539/mas.v12n2p148
  25. Sabnis, G.M. (1980), "Size effects in material systems and their impact on model studies: A theoretical approach", Proceedings of the SECTAM X Conference, Knoxville, Tennessee, U.S.A.
  26. Sabnis, G.M. and Mirza, S.M. (1979), "Size effect in model concretes", J. Struct. Div., 105(6), 1007-1020. https://doi.org/10.1061/JSDEAG.0005160
  27. Saravanan, T.J., Rao, G.V.R., Prakashvel, J., Gopalakrishnan, N., Lakshmanan, N. and Murty, C.V.R. (2017), "Dynamic testing of open ground story structure and in situ evaluation of displacement demand magnifier", J. Perform. Constr. Facilit., 31(5), 04017055. https://doi.org/10.1061/(ASCE)CF.1943-5509.0001052
  28. Schmidt-Nielsen, K. (1984), Scaling: Why is Animal Size So Important?, Cambridge University Press.
  29. Selker, F. and Carter, D.R. (1989), "Scaling of long bone fracture strength with animal mass", J. Biomech., 22(11-12), 1175-1183. https://doi.org/10.1016/0021-9290(89)90219-4
  30. Stepanov, I.A. (1995), "The scale effect is a consequence of the cellular structure of solid bodies: Thermo fluctuation nature of spread in the values of strength", Mater. Sci., 31(4), 441-447. https://doi.org/10.1007/BF00559137
  31. Taylor, D. (2000), "Scaling effects in the fatigue strength of bones from different animals", J. Theoret. Biol., 206(2), 299-306. https://doi.org/10.1006/jtbi.2000.2125
  32. Thompson, D.D., Simmons, H.A., Pirie, C.M. and Ke, H.Z. (1995), "FDA guidelines and animal models for osteoporosis", Bone, 17(4), 125-133.