DOI QR코드

DOI QR Code

혼유 주유 방지 및 세차 대기 표시기 구현

An Implementation for Oil Mixing Preventive Device and Time Indicator

  • 김성진 (남서울대학교 전자공학과) ;
  • 선우용운 (남서울대학교 전자공학과) ;
  • 이성현 (남서울대학교 전자공학과) ;
  • 이정웅 (남서울대학교 전자공학과) ;
  • 이승대 (남서울대학교 전자공학과)
  • 투고 : 2018.06.25
  • 심사 : 2019.02.15
  • 발행 : 2019.02.28

초록

본 논문에서는 주유소에서 초보운전자들이나 박혀있는 고정관념으로 인해 발생하는 혼유 사고를 방지하는 것을 구현하였다. MQ-9 가스 센서를 이용하여 차량 연료용 탱크의 CO 가스 농도를 측정한 후 경유와 휘발유를 감별하여 주유기의 유종과 다를 경우 서보모터를 이용하여 주유기 노즐의 손잡이를 잠가 혼유를 방지할 수 있는 주유기의 혼유 방지 장치에 관한 것이다. 또한 주유를 마치고 세차를 하려는 이용 고객의 시간 절약과 편의성 도모를 하기 위한 세차 시간 표시를 적외선 센서를 이용하여 구현하였다.

In this paper, we implemented the prevention of oil mixing accidents caused by stereotypes or novice drivers at gas stations. After the CO gas concentration of the fuel tank is measured using the MQ-9 gas sensor, the gasoline and diesel are distinguished from each other. This is decided by using a servomotor to lock of the fueling nozzle to prevent the mixing of oil. In addition, car washes time display is implemented by using infrared sensor to save the time and to provide convenience for customers who want to wash car after fueling.

키워드

KCTSAD_2019_v14n1_191_f0001.png 이미지

그림 1. 연도별 혼유 사고 통계 Fig. 1 Oil mixing accidents statistics by year

KCTSAD_2019_v14n1_191_f0002.png 이미지

그림 2. 시스템 구성도 Fig. 2 System configuration

KCTSAD_2019_v14n1_191_f0003.png 이미지

그림 3. 시스템 흐름도 Fig. 3 Flow chart

KCTSAD_2019_v14n1_191_f0004.png 이미지

그림 4. 휘발유 측정 전압 Fig. 4 Voltage measured on gasoline

KCTSAD_2019_v14n1_191_f0005.png 이미지

그림 5. 경유 측정 전압 Fig. 5 Voltage measured on diesel

표 1. MQ-9을 이용한 가스 측정량 평균값 Table 1. Average gas measured by MQ-9

KCTSAD_2019_v14n1_191_t0001.png 이미지

표 2. MQ-135를 이용한 가스 측정량 평균값 Table 2. Average gas measured by MQ-135

KCTSAD_2019_v14n1_191_t0002.png 이미지

표 3. MQ-9을 이용한 실제 차량 측정량 평균값 Table 3. Actual Vehicle Measured Average Using MQ-9

KCTSAD_2019_v14n1_191_t0003.png 이미지

표 4. MQ-135를 이용한 실제 차량 측정량 평균값 Table 4. Actual Vehicle Measured Average Using MQ-135

KCTSAD_2019_v14n1_191_t0004.png 이미지

표 5. MQ-9 온도별 가스 측정량 평균값 Table 5. MQ-9 Average gas measurement by temperature

KCTSAD_2019_v14n1_191_t0005.png 이미지

참고문헌

  1. J. Yoo, C. Kim, and M. Kim, "An Experimental Study on Reduction of Exhaust Emissions and Fuel Consumption of Diesel Vehicles with Eco-Friendly Fuel Treatment," J. of the Korea Society of Mechanical Technology, vol. 17, no. 3, 2015, pp. 519-524. https://doi.org/10.17958/ksmt.17.3.201506.519
  2. S. Choi, "Vehicle different anti-fueling system," Korea Patent, no. 100062817, June 3, 2016.
  3. Y. Paek and N. Tak, "Different anti-fueling system of Oil nozzle," Korea Patent, no. 101579428, Dec. 16, 2015.
  4. J. Shin, "Development of Carbon Dioxide Reduction System from Exhaust Gases in a Duct," J. of the Korea Society of Mechanical Technology, vol. 16, no. 4, 2014, pp. 1725-1730.
  5. J. Sim and J. Ko, Arduino for fun. Seoul: Hanteemedia 2011, pp. 84-126.
  6. C. Kim, "Robust Disturbance Suppression Control for AC Servo Motors," J. of the Korea Society of Mechanical Technology, vol. 7, no. 4, 2012, pp. 839-848.
  7. J. Kim and I. Ji, Sensor basics and applications for practitioners. Seoul: Bogdoo Publishing, 2012, pp. 199-209.
  8. M. Heo, K. Kim, S. Mun, and T. Kwon, "Development of a Gait Parameter Detection System using an Infrared LED Sensor," J. of the Korea Society of Mechanical Technology, vol. 17, no. 1, 2015, pp. 119-125. https://doi.org/10.17958/ksmt.17.1.201502.119
  9. M. Cho and H. Lee, "Digital Control System using Infrared Rays Module," J. of the Korea Society of Mechanical Technology, vol. 14, no. 6, 2012, pp. 93-97. https://doi.org/10.17958/ksmt.14.6.201212.93
  10. H. Sim and J. Oh, "Valve Monitoring System Design and Implementation using An Infrared Sensor and ZigBee," J. of the Korea Institute of Electronic Communication Sciences, vol. 19, no. 1, 2015, pp. 73-79.
  11. Y. Park, J. Song, N. Choi, S. Lee, and J. Lee, "Study of Room Indicator using Display," J. of the Korea Institute of Electronic Communication Science, vol. 12, no. 6, 2017, pp. 1082-1092.