Korean Journal of Construction Engineering and Management (한국건설관리학회논문집)

Korea Institute of Construction Engineering and Management (한국건설관리학회)
권호 표지
DOI QR코드

DOI QR Code

Development of Model Requirements Checklist for Utilizing BIM in Construction Phase - Focused on the MEP -

시공단계 BIM 활용을 위한 모델 요구조건 체크리스트 개발 - MEP를 중심으로 -

  • Received : 2018.08.07
  • Accepted : 2018.10.15
  • Published : 2019.01.31
Download PDF
⟨ Previous Next ⟩

Abstract

The application of BIM that can manage and integrate information generated during the entire life cycle of buildings in domestic and overseas construction projects is becoming active. When BIM is utilized in the construction phase, it can shorten the construction period, reduce the occurrence of reworks and improve collaboration capability. However, there are limitations in applying BIM to the construction phase due to the insufficient definition level of domestic BIM guidelines and inadequate design standards. In this regard, this study developed BIM model requirements checklist for the application of BIM in the construction phase. To develop the checklists, 21 domestic and overseas BIM guidelines, three public construction projects and four private construction projects to which construction BIM was applied, were analyzed. Based on the guidelines and cases, a total of 62 construction BIM model requirements (31 model objects and 31 attribute rules) and proposed construction BIM model requirement checklists by dividing the 61 requirements according to the requirement and purpose for utilization were identified. It is expected that the practical applications of the checklists proposed in this study will improve the level of BIM model in construction phase. In addition, this study has its significance as a basic research that can be used in the development of standardized guidelines for BIM model in construction phase from academic aspects.

국내 외 건설공사에서 건물의 전 생애주기 동안에 발생되는 정보의 관리 및 통합이 가능한 BIM 적용이 활발해지고 있다. BIM을 시공단계에 활용할 경우 공기단축, 재시공 감소, 협업능력 향상 등의 효과가 있다. 그러나 국내 BIM 지침서 정의수준 부족, 설계 기준의 미비 때문에 시공단계에 BIM을 적용하는데 한계가 있다. 특히, 설계 단계에 비해 시공단계에서는 MEP 분야는 그 중요성이 훨씬 커진다. 따라서 본 연구는 시공단계의 MEP 분야에서 BIM활용도를 높이기 위하여, 시공 BIM MEP 모델 요구조건 체크리스트를 개발하였다. 체크리스트 개발을 위하여 국내 외 BIM 지침서 및 시공 BIM이 적용된 민간 공공 공사의 사례를 분석하였다. 지침서 및 사례를 토대로 작성객체 31개, 속성기준 31개, 총 62개의 시공 BIM 모델 요구조건을 도출하였다. 도출한 62개의 요구조건을 활용목적과 필요사항으로 구분하여 시공 BIM MEP모델 요구조건 체크리스트를 제안하였다. 본 연구에서 제안한 체크리스트를 실무에서 활용한다면 시공단계 MEP BIM 모델의 활용도를 향상시킬 수 있을 것으로 기대된다. 또한 학문적인 측면에서 시공단계 BIM 모델의 표준화된 지침서 개발에 활용될 기초연구로서 의미가 있다.

Keywords

Table 1. Status of overseas BIM guideline

GGRHC4_2019_v20n1_22_t0001.png 이미지

Table 2. Basic information of the public projects

GGRHC4_2019_v20n1_22_t0002.png 이미지

Table 3. Basic information of the private projects

GGRHC4_2019_v20n1_22_t0003.png 이미지

Table 4. The purpose of utilization for the construction BIM model

GGRHC4_2019_v20n1_22_t0004.png 이미지

Table 5. The guidelines for identifying the model requirements

GGRHC4_2019_v20n1_22_t0005.png 이미지

Table 6. Identification of model requirements for BIM model objects

GGRHC4_2019_v20n1_22_t0006.png 이미지

Table 7. Identification of model requirements for BIM attribute rules

GGRHC4_2019_v20n1_22_t0007.png 이미지

Table 8. Checklist for construction BIM model requirements

GGRHC4_2019_v20n1_22_t0008.png 이미지

References

  1. Architectural, Engineering and Construction (AEC) (2012). AEC BIM Protocol v2.0, UK.
  2. Ahn, H. K. (2013). "A Study on Improvement Plan of MEP BIM business for 2D Design and Construction Step using DSM." Master thesis, Hanyang Univ., Korea.
  3. BIM Forum (2013). 2013-Level of Development Specification, U.S.
  4. BIM Forum (2014). 2014-Level of Development Specification, U.S.
  5. BIM Forum (2015). 2015-Level of Development Specification, U.S.
  6. Building & Construction Authority (BCA) (2013). Singapore BIM Guide Ver. 2, Singapore.
  7. Cho, S. (2010). "Analysis of participant's opinion regarding the public project for BIM requirement and estimation process." Master thesis, Yonsei Univ., Korea.
  8. Computer Integrated Construction Research Group (2011). BIM Project Execution Planning Guide v2.1, Pennsylvania State Univ., PA., U.S.
  9. CRC Construction Innovation (2009). National Guidelines a for Digital Modeling, Qld., Australia.
  10. Department of Defense (DoD) (2011). MHS Facility Life Cycle Management BIM Minimum Requirements, U.S.
  11. Department of Veterans Affairs (DoVA) (2010). The VA BIM Guide, U.S.
  12. Engineer Research annd Development Center (ERDC) (2012). The US Army Corps of Engineers Roadmap for Life-Cycle Building Information Modeling, Washington, D.C., U.S.
  13. General Services Administration (GSA) (2007). 3D-4D Building Information Modeling BIM Guide Series, U.S.
  14. Hwang, J. H. (2014). "Development of Integrated Management Process for Precast Concrete Construction Method based on BIM." Master thesis, Univ. of Seoul, Korea.
  15. Korea Institute of Civil Engineering and Building Technology (KICT) (2011). Common Criteria for Construction Information Model Creation and Delivery v1.0.
  16. Kwon, O. C., and Jo, C. W. (2011). "Proposal of BIM Quality Management Standard by Analyzing Domestic and International BIM Guides." Journal of the Korea Institute of Building Construction, KIC, 11(3), pp. 265-275. https://doi.org/10.5345/JKIC.2011.06.3.265
  17. Lee, G. (2011). BIM reading with 43 questions, pixelhouse, Seoul, Korea.
  18. Ministry of Land, Infrastructure and Transport (2014, 2016). Technical Proposal Bid Guide Standard.
  19. Ministry of Land, Transport and Maritime Affairs (2010). National Architectural BIM Guide.
  20. National Institute of Building Sciences (2011). National BIM Standard - United States v2, U.S.
  21. National Institute of Standards and Technology (NIST) (2007). General Buildings Information Handover Guide: Principles, Methodology and Case Studies, U.S.
  22. NYC Department of Design + Construction (2012). BIM Guidelines, NY., U.S.
  23. Public Procurement Service (2017). Architectural BIM Guide v1.32.
  24. Statsbygg (2009). Statsbygg BIM Manual, Norway.
  25. Statsbygg (2013). Statsbygg BIM Manual 1.2.1, Norway.
  26. Senate Properties (2007). BIM Requirement, Finland.
  27. Senate Properties (2012). Common BIM Requirements 2012, Finland.
  28. Shin, I. K. (2013). "An approach to enhance constructability by introducing BIM in the phase of construction." Master thesis, Hanyang Univ., Korea.
  29. Song, J. K., and Ju, K. B. (2013). "Development of Rule for Quality Checking Items to Raise Quality of BIM Model - Focusing on the domestic BIM guidelines -" Korean Journal of Construction Engineering and Management, KICEM, 14(5), PP. 131-143. https://doi.org/10.6106/KJCEM.2013.14.5.131
  30. Song, M. S. (2014). "Improvement of design management service of construction manager through BIM simulation." Master thesis, Korea Univ., Korea.
  31. VirtuAlmighty (2010). BIM Guide Line V2.0, Ministry of Land, Transport and Maritime Affairs.
  32. Yu, Y., Jeong, J. Jung, I., Yoon, H., and Lee, C. (2013). "Development of BIM-based Work Process Model in Construction Phase." Korean Journal of Construction Engineering and Management, KICEM, 14(1), PP. 133-143. https://doi.org/10.6106/KJCEM.2013.14.1.133