DOI QR코드

DOI QR Code

Push-out resistance of concrete-filled spiral-welded mild-steel and stainless-steel tubes

  • Loke, Chi K. (Materials and Structures Innovation Group, School of Engineering, The University of Western Australia) ;
  • Gunawardena, Yasoja K.R. (Materials and Structures Innovation Group, School of Engineering, The University of Western Australia) ;
  • Aslani, Farhad (Materials and Structures Innovation Group, School of Engineering, The University of Western Australia) ;
  • Uy, Brian (School of Civil Engineering, The University of Sydney)
  • 투고 : 2019.08.20
  • 심사 : 2019.11.01
  • 발행 : 2019.12.25

초록

Spiral welded tubes (SWTs) are fabricated by helically bending a steel plate and welding the resulting abutting edges. The cost-effectiveness of concrete-filled steel tube (CFST) columns can be enhanced by utilising such SWTs rather than the more conventional longitudinal seam welded tubes. Even though the steel-concrete interface bond strength of such concrete-filled spiral-welded steel tubes (CF-SWSTs) is an important consideration in relation to ensuring composite behaviour of such elements, especially at connections, it has not been investigated in detail to date. CF-SWSTs warrant separate consideration of their bond behaviour to CFSTs of other tube types due to the distinct weld seam geometry and fabrication induced surface imperfection patterns of SWTs. To address this research gap, axial push-out tests on forty CF-SWSTs were carried out where the effects of tube material, outside diameter (D), outside diameter to wall thickness (D/t), length of the steel-concrete interface (L) and concrete strength grade (f'c) were investigated. D, D/t and L/D values in the range 102-305 mm, 51-152.5 and 1.8-5.9 were considered while two nominal concrete grades, 20 MPa and 50 MPa, were used for the tests. The test results showed that the push-out bond strengths of CF-SWSTs of both mild-steel and stainless-steel were either similar to or greater than those of comparable CFSTs of other tube types. The bond strengths obtained experimentally for the tested CF-SWSTs, irrespective of the tube material type, were found to be well predicted by the guidelines contained in AISC-360.

키워드

과제정보

연구 과제 주관 기관 : University of Western Australia

The authors wish to thank James Ballard, Jim Waters, Brad Rose and Michael Pederson for the help they extended towards conducting the experimental programme. The first and second authors also wish to acknowledge that their research work is supported by the Australian Government Research Training Program (RTP) scholarships. The work described in this paper was financially supported by the University of Western Australia.

참고문헌

  1. Abendeh, R., Ahmad, H.S. and Hunaiti, Y.M. (2016), "Experimental studies on the behavior of concrete-filled steel tubes incorporating crumb rubber", J. Constr. Steel Res., 122, 251-260. https://doi.org/10.1016/j.jcsr.2016.03.022
  2. Alfawakhiri, F. (1997), Behavior of High-strength Concrete-filled Circular Steel Tube Beam-columns, University of Ottawa Ann Arbor.
  3. Aly, T., Elchalakani, M., Thayalan, P. and Patnaikuni, I. (2010), "Incremental collapse threshold for pushout resistance of circular concrete filled steel tubular columns", J. Constr. Steel Res., 66(1), 11-18. https://doi.org/10.1016/j.jcsr.2009.08.002
  4. American Institute of Steel Construction (2016), ANSI/AISC 360-16.
  5. Architectural Institute of Japan (AIJ) (2001), Standard for Structural Calculation of Steel Reinforced Concrete Structures.
  6. Chen, B.-C. and Chen, J.-K. (2016), "Experimental studies on shear-bearing capacity of headed stud in concrete-filled steel tube", Gongcheng Lixue/Engineering Mechanics, 33(2), 66-73.
  7. Chen, Z., Xu, J., Xue, J. and Su, Y. (2013), "Push-out test on the interface bond-slip behavior and calculation on bond strength between steel tube and recycled aggregate concrete in RACFST structures", Tumu Gongcheng Xuebao/China Civil Engineering Journal, 46(3), 49-58.
  8. Chen, Y., Feng, R., Shao, Y. and Zhang, X. (2017), "Bond-slip behaviour of concrete-filled stainless steel circular hollow section tubes", J. Constr. Steel Res., 130, 248-263. https://doi.org/10.1016/j.jcsr.2016.12.012
  9. Ding, Q.-J., Zhou, X.-J., Mou, T.-M., Fan, B.-K. and Yan, Y.-L. (2013), "Bond properties at interface of steel fiber reinforced micro-expansion concrete filled steel tube", Gongneng Cailiao/Journal of Functional Materials, 44(6), 809-813.
  10. EN 1994-1-1:2004 (2004), Eurocode 4: Design of composite steel and concrete structures, Part 1.1, General rules and rules for buildings.
  11. Fu, Z.Q., Ge, H.B., Ji, B.H. and Chen, J.J. (2018), "Interface bond behaviour between circular steel tube and lightweight aggregate concrete", Adv. Steel Constr., 14(3), 424-437.
  12. Grzeszykowski, B., Szadkowska, M. and Szmigiera, E. (2017), "Analysis of stress in steel and concrete in CFST push-out test samples", Civil Environ. Eng. Reports, 26(3), 145-159. https://doi.org/10.1515/ceer-2017-0042
  13. Guan, M., Lai, Z., Xiao, Q., Du, H. and Zhang, K. (2019), "Bond behavior of concrete-filled steel tube columns using manufactured sand (MS-CFT)", Eng. Struct., 187, 199-208. https://doi.org/10.1016/j.engstruct.2019.02.054
  14. Gunawardena, Y. and Aslani, F. (2018), "Behaviour and design of concrete-filled mild-steel spiral welded tube short columns under eccentric axial compression loading", J. Constr. Steel Res., 151, 146-173. https://doi.org/10.1016/j.jcsr.2018.09.018
  15. Gunawardena, Y. and Aslani, F. (2019a), "Behaviour and design of concrete-filled spiral-welded stainless-steel tube short columns under concentric and eccentric axial compression loading", J. Constr. Steel Res., 158, 522-546. https://doi.org/10.1016/j.jcsr.2019.04.013
  16. Gunawardena, Y. and Aslani, F. (2019b), "Concrete-filled spiral-welded stainless-steel tube long columns under concentric and eccentric axial compression loading", J. Constr. Steel Res., 161, 201-226. https://doi.org/10.1016/j.jcsr.2019.07.006
  17. Gunawardena, Y., Aslani, F. and Uy. B. (2019), "Concrete-filled mild-steel spiral-welded tube long columns under eccentric axial compression loading", J. Constr. Steel Res., 159, 341-363. https://doi.org/10.1016/j.jcsr.2019.04.045
  18. Kang, X.-L., Cheng, Y.-F., Tu, Y. and Xue, J.-Y. (2010), "Experimental study and numerical analysis of bond-slip performance for concrete filled steel tube", Gongcheng Lixue/Engineering Mechanics, 27(9), 102-106.
  19. Ke, X., Sun, H., Chen, Z., Su, Y. and Ying, W. (2015), "Interface mechanical behavior test and bond strength calculation of high-strength concrete filled circular steel tube", Jianzhu Jiegou Xuebao/Journal of Building Structures, 36, 401-406.
  20. Knoop, F.M. and Sommer, B. (2004), Manufacturing and use of spiral welded pipes for high pressure service - State of the art, American Society of Mechanical Engineers, Calgary, Alta, Canada.
  21. Kyriakides, S. and Corona, E. (2007), Mechanics of Offshore Pipelines, Elsevier Ltd.
  22. Lehman, D., Roeder, C. and Stephens, M.T. (2018), Concretefilled tube bridges for accelerated bridge construction, University of Washington.
  23. Lu, Y., Liu, Z., Li, S. and Li, N. (2018a), "Bond behavior of steel fibers reinforced self-stressing and self-compacting concrete filled steel tube columns", Constr. Build. Mater., 158, 894-909. https://doi.org/10.1016/j.conbuildmat.2017.10.085
  24. Lu, Y., Liu, Z., Li, S. and Tang, W. (2018b), "Bond behavior of steel-fiber-reinforced self-stressing and self-compacting concrete-filled steel tube columns for a period of 2.5 years", Constr. Build. Materi., 167, 33-43. https://doi.org/10.1016/j.conbuildmat.2018.01.144
  25. Lyu, W.-Q. and Han, L.-H. (2019), "Investigation on bond strength between recycled aggregate concrete (RAC) and steel tube in RAC-filled steel tubes", J. Constr. Steel Res., 155, 438-459. https://doi.org/10.1016/j.jcsr.2018.12.028
  26. Morino, S. and Tsuda, K. (2003), "Design and construction of concrete-filled steel tube column system in Japan", Earthq. Eng. Eng. Seismol., 4(1), 51-73.
  27. Radhika, K.S. and Baskar, K. (2012), "Bond stress characteristics on circular concrete filled steel tubular columns using mineral admixture metakaoline", Int. J. Civil Struct. Eng., 3(1), 1-8.
  28. Radhika, K.S. and Baskar, K. (2013), "Bond stress characteristics on circular concrete filled steel tubular columns using mineral admixture silica fume", Int. J. Earth Sci. Eng., 6(1), 170-177.
  29. Rasmussen, K.J.R. (2003), "Full-range stress-strain curves for stainless steel alloys", J. Constr. Steel Res., 59(1), 47-61. https://doi.org/10.1016/S0143-974X(02)00018-4
  30. Roeder, C.W., Cameron, B. and Brown, C.M. (1999), "Composite action in concrete filled tubes", J. Struct. Eng., 125(5), 477-484. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:5(477)
  31. Roeder, C.W., Lehman, D.E. and Thody, R. (2009), "Composite action in CFT components and connections", Eng. J., 46(4), 229-242.
  32. ROLADUCT Spiral Tubing Group (2017), Spiral Welded Tube, Pipe & Fittings: Product Information.
  33. Sadowski, A.J., Van Es, S.H.J., Reinke, T., Michael Rotter, J., Nol Gresnigt, A.M. and Ummenhofer, T. (2015), "Harmonic analysis of measured initial geometric imperfections in large spiral welded carbon steel tubes", Eng. Struct., 85, 234-248. https://doi.org/10.1016/j.engstruct.2014.12.033
  34. Shakir-Khalil, H. (1993), "Pushout strength of concrete-filled steel hollow section tubes", Struct. Engineer, 71(13).
  35. Standards Australia (2007), AS/NZS 1391-2007.
  36. Standards Australia (2017a), AS/NZS 2327:2017.
  37. Standards Australia (2017b), AS/NZS 5100.6:2017.
  38. Tao, Z., Han, L.-H. and Uy, B. (2012), "Behaviour of concrete-filled stainless steel tubular columns at ambient and elevated temperatures", Qingdao, China.
  39. Tao, Z., Song, T.-Y., Uy, B. and Han, L.-H. (2016), "Bond behavior in concrete-filled steel tubes", J. Constr. Steel Res., 120, 81-93. https://doi.org/10.1016/j.jcsr.2015.12.030
  40. Tremayne, H., Mahin, S.A., Monterrosa, J.A., Dean, S., Fong, C., Jachens, E.R., Lam, D., Minner, M., Pavicic, J. and Rodriguez, L. (2013), Earthquake Engineering for Resilient Communities: 2013 PEER Internship Porgram Research Report Collection, Pacific earthquake engineering research center.
  41. Virdi, K.S. and Dowling, P.J. (1980), "Bond strength in concrete filled steel tubes", IABSE Periodica, 33(80), 15.
  42. Xu, C., Chengkui, H., Decheng, J. and Yuancheng, S. (2009), "Push-out test of pre-stressing concrete filled circular steel tube columns by means of expansive cement", Constr. Build. Mater., 23(1), 491-497. https://doi.org/10.1016/j.conbuildmat.2007.10.021
  43. Xu, J., Chen, Z., Xue, J. and Su, Y. (2013), "Failure mechanism of interface bond behavior between circular steel tube and recycled aggregate concrete by push-out test", Jianzhu Jiegou Xuebao/Journal of Building Structures, 34(7), 148-157.
  44. Xu, K., Bi, L. and Chen, M. (2015), "Experimental study on bond stress-slip constitutive relationship for CFST", Jianzhu Jiegou Xuebao/Journal of Building Structures, 36, 407-412.
  45. Yan, Z., An, M., Wu, P., Li, J. and Zhang, L. (2009), "Experimental study of the bond strength at the interface of reactive powder concrete-filled steel tube columns", Zhongguo Tiedao Kexue/China Railway Science, 30(6), 7-11.
  46. Yin, X. and Lu, X. (2010), "Study on push-out test and bond stress-slip relationship of circular concrete filled steel tube", Steel Compos. Struct., Int. J., 10(4), 317-329. https://doi.org/10.12989/scs.2010.10.4.317
  47. Yuan, X. and Chen, X. (2018), "Effect analysis of expansion agent on interfacial bond behavior of concrete filled steel tubular", Chem. Eng. Transact., 66, 1165-1170. https://doi.org/10.3303/CET1866195
  48. Zhang, J., Denavit, M.D., Hajjar, J.F. and Lu, X. (2012), "Bond behavior of concrete-filled steel tube (CFT) structures", Eng. J., 49(4), 169-185.