Journal of the Korea Institute of Building Construction (한국건축시공학회지)

The Korean Institute of Building Construction (한국건축시공학회)
권호 표지
DOI QR코드

DOI QR Code

Properties of Adhesion in Flexure and Tension of Polymer Cement Mortar Using SAE Emulsion with Blast-Furnace and Fly Ash as a Repair Material

보수재료로서 고로슬래그 미분말 및 플라이애쉬를 혼입한 SAE 에멀젼 기반 폴리머 시멘트 모르타르의 휨접착 및 인장접착 특성

  • Jo, Young-Kug (Department of Architectural Engineering, Chungwoon University)
  • Received : 2019.08.02
  • Accepted : 2019.11.26
  • Published : 2019.12.20
Download PDF
⟨ Previous Next ⟩

Abstract

This study is to evaluate the effect of admixtures such as blast-furnace slag and fly ash on adhesion in flexure and tension of polymer cement mortar(PCM) using SAE emulsion. The test specimens are prepared with five polymer-cement ratios and five admixture contents, and tested for flexural strength, adhesion in flexure, tensile strength and adhesion in tension. Based on the test results, no improvement of flexural strength and adhesion in flexure caused by admixtures in PCM can be indicated, but the tensile strength and adhesion in tension is improved due to mixing of the admixtures. In particular, the maximum of adhesion in tension of PCM with P/C 20% and BF content of 10% is 3.35MPa which is about 2.36 times higher than that of ordinary cement mortar, and 1.32 times that of PCM that does not contain any admixture. The average ratio of adhesion in tension to tensile strength of PCM was 48.7%. It is apparent that admixture contents of 5% or 10% could be proposed for improvement of tensile strength and adhesion in tension of PCM.

본 연구는 고로슬래그 미분말 및 플라이애쉬를 혼입한 SAE 에멀젼 기반 폴리머 시멘트 모르타르의 휨과 인장특성에 대하여 실험하여 혼화재의 혼입효과를 평가하고자 하였다. PCM은 폴리머 시멘트비와 혼화재의 혼입율을 변화시켜 시험편을 제작하였으며, 휨강도, 휨접착강도, 인장강도 및 인장접착강도 시험을 실시하였다. 연구결과, 혼화재의 혼입에 따른 휨강도 및 휨접착강도 개선은 거의 발현되지 않았으나, 인장강도 및 인장접착강도에서는 혼화재의 혼입에 따른 강도개선 효과를 얻을 수 있었다. 특히 PCM의 인장 접착강도는 P/C 20%, 고로슬래그 미분말 혼입율 10%에서 최대 3.35MPa로 보통시멘트 모르타르의 약 2.36배, 혼화재를 혼입하지 않은 PCM의 약 1.32배의 높은 강도를 나타냈으며 인장접착강도/인장강도비는 평균 48.7%를 나타냈다. 본 연구를 통하여 PCM의 인장 및 인장접착강도 개선을 위해서는 혼화재 혼입율 5% 또는 10%를 제안할 수 있었다.

Keywords

References

  1. Ohama Y. Handbook of Polymer-Modified Concrete and Mortars. New Jersey: Noyes Publications; 1995. 225 p.
  2. Pareek SN. Improvement in adhesion of polymeric repair and finish materials for reinforced concrete structures [Dissertation]. [koriyama (Japan)]: Nihon University; 1993. 183 p.
  3. Ohama Y. Principle of latex modification and some typical properties of latex-modified concrete. ACI Material Journal. 1987 Nov;84(6):511-8. https://doi.org/10.14359/2463
  4. Jo YK. Properties of polymer cement mortars under combined cures. Journal of the Korea Concrete Institute. 2006 0ct;18(5):667-75. https://doi.org/10.4334/JKCI.2006.18.5.667
  5. Ohama Y. Study on properties and mix proportioning of polymer-modified mortars for buildings. Report of the Building Research Institute. 1973 Oct;65:100-4.
  6. Kim MJ, Shin GO, Joo NC, Lee GJ, Jeong JP. Vibration properties of concrete overlays using RS-LMC. Journal of the Korea concrete Institute. 2016 Oct;28(5):571-9. https://doi.org/10.4334/JKCI.2016.28.5.571
  7. Choi KK. Numerical investigation on cracking of bridge desk slabs with latex modified concrete overlays. Journal of the Korea concrete Institute. 2010 Feb;22(1):77-84. https://doi.org/10.4334/JKCI.2010.22.1.077
  8. Ohama Y, Ibe H, Mine H, Kato K. Cement mortars modified by SB latexes with variable bound styrene. Rubber Chemistry and Technology. 1964 Jul;37(3):758-69. https://doi.org/10.5254/1.3540369
  9. Jo YK. Adhesion in tension of cement mortar to cement concrete substrates coated with polymer cement slurry. Journal of the Architectural Institute of Korea. 2009 Jun;25(6):123-30.
  10. Y Ohama. Use of polymers for improvements in durability of reinforced concrete structures and their repairing works. Journal of the Adhesion Society of Japan. 1988 Aug;24(8):313-22.
  11. Sawaide M. Improved construction joint work of early-age concrete by polymer-emulsion treatments. Proceedings of the 6th International Congress on Polymers in Concrete; 1990 Sep 8-11; Shanghai, China. Shanghai (China): International Academic Publishers; 1990. p. 562-8.
  12. Jo YK. A study on the improvement of adhesion in tension and flexure of polymer cement mortar depending on various test methods. Journal of the Korea Institute of Building Construction 2019 Feb;19(1):47-57. https://doi.org/10.5345/JKIBC.2019.19.1.047
  13. Yoon YS, Cho SJ, Kwon SJ. Prediction equation for chloride diffusion in concrete containing GGBFS based on 2-Year cured results. Journal of the Korea Institute for Structural Maintenance and Inspection. 2019 Mar;23(2):1-9. https://doi.org/10.11112/jksmi.2019.23.2.1
  14. Garbacz A. Sokolowska JJ. Concrete-like polymer composites with fly ashes-Comparative study. Construction and Building Materials. 2013 Jan;38:689-99. https://doi.org/10.1016/j.conbuildmat.2012.08.052
  15. Son BG, Lee HS, Lee YJ, Han DY. Fluidity performance evaluation of low viscosity typed superplasticizer for cement-based materials incorporating supplementary cementitious materials. Journal of the Korea Institute of Building Construction. 2019 Jun;19(3):219-28. https://doi.org/10.5345/JKIBC.2019.19.3.219
  16. Ohama Y, Demura K, Nagao H, Ogi T. Adhesion of polymermodified mortars to ordinary cement by different test methods. Proceedings of an International Symposium by RILEM Technical Committee 52-Resin Adherence to Concrete and Laboratoire Central des Ponts et Chaussees; 1986 Sep 16-19; Paris, France. London (England): Chapman and Hall; 1986. p. 719-29. https://doi.org/10.1007/978-1-4899-3454-3_67