Journal of the Korean Association of Geographic Information Studies (한국지리정보학회지)

The Korean Association of Geographic Information Studies (한국지리정보학회)
권호 표지
DOI QR코드

DOI QR Code

Automatic Registration of Point Cloud Data between MMS and UAV using ICP Method

ICP 기법을 이용한 MSS 및 UAV 간 점군 데이터 자동정합

  • KIM, Jae-Hak (Geo-Spatial Information Planing Team, Geostory Co. Ltd.) ;
  • LEE, Chang-Min (Dept. of Civil Engineering, Kangwon National University) ;
  • KIM, Hyeong-Joon (Dept. of Civil Engineering, Kangwon National University) ;
  • LEE, Dong-Ha (Dept. of Civil Engineering, Kangwon National University)
  • 김재학 ((주)지오스토리 신사업기획팀) ;
  • 이창민 (강원대학교 건축.토목.환경공학부) ;
  • 김형준 (강원대학교 건축.토목.환경공학부) ;
  • 이동하 (강원대학교 건축.토목.환경공학부)
  • Received : 2019.12.26
  • Accepted : 2019.12.26
  • Published : 2019.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

3D geo-spatial model have been widely used in the field of Civil Engineering, Medical, Computer Graphics, Urban Management and many other. Especially, the demand for high quality 3D spatial information such as precise road map construction has explosively increased, MMS and UAV techniques have been actively used to acquire them more easily and conveniently in surveying and geo-spatial field. However, in order to perform 3D modeling by integrating the two data set from MMS and UAV, its so needed an proper registration method is required to efficiently correct the difference between the raw data acquisition sensor, the point cloud data generation method, and the observation accuracy occurred when the two techniques are applied. In this study, we obtained UAV point colud data in Yeouido area as the study area in order to determine the automatic registration performance between MMS and UAV point cloud data using ICP(Iterative Closet Point) method. MMS observations was then performed in the study area by dividing 4 zones according to the level of overlap ratio and observation noise with based on UAV data. After we manually registered the MMS data to the UAV data, then compared the results which automatic registered using ICP method. In conclusion, the higher the overlap ratio and the lower the noise level, can bring the more accurate results in the automatic registration using ICP method.

건설, 의료, 컴퓨터 그래픽스, 도시공간 관리 등 다양한 분야에서 3차원 공간모델이 이용되고 있다. 특히 측량 및 공간정보 분야에서는 최근 스마트시티, 정밀도로지도 구축 등과 같은 고품질의 3차원 공간정보에 대한 수요가 폭발적으로 증가하면서, 이를 보다 손쉽고, 간편하게 취득하기 위하여 MMS, UAV와 같은 관측기술이 활발히 활용되고 있다. 하지만 두 자료를 통합하여 3차원 모델링을 수행하기 위해서는, 두 관측기술 적용 시 발생하는 원시자료 취득센서, 점군 자료생성 방식 및 관측정확도 간의 차이를 효율적으로 보정할 수 있는 최적의 정합방법이 필요하다. 본 연구에서는 일반적인 3차원 모델의 자동정합에 사용되는 ICP(Iterative Closet Point) 기법을 통한 MMS와 UAV 점군 데이터 간 자동정합 성능을 판단하기 위하여, 여의도 지역을 연구대상지역으로 설정하고 UAV 영상을 취득 후 점군 자료로 변환하였다. 그 후 대상지역을 총 4개의 구역으로 구분하여 MMS 관측을 수행하였으며, UAV 점군 자료를 기반으로 각 구역에서 관측된 MMS 점군 자료와 수동정합하고 이를 ICP 기반으로 자동정합한 결과와 비교하였다. 보다 엄밀하게 ICP 기반의 자동정합 성능을 판단하기 위하여 각 구역별로 데이터 중첩률, 노이즈 레벨 등의 변수를 다르게 하여 비교를 수행하였다. 결론적으로 ICP 기반의 자동정합 시 데이터 중첩률이 높고, 노이즈 레벨이 낮을수록 더 높은 정확도로 정합될 수 있다는 것을 알 수 있었다.

Keywords

References

  1. Kang, J.A. and Hwang, J.R., 2014, A study on the user satisfaction surveys and analysis for improvement of the VWorld service, Journal of the Korea Spatial Information Society, 22(6):23-32. https://doi.org/10.12672/ksis.2014.22.6.023
  2. Schnabel, R., Wahl, R., and Klein, R.. 2007, Efficient RANSAC for point‐cloud shape detection. In Computer graphics forum, 26(2):214-226. Oxford, UK: Blackwell Publishing Ltd.
  3. Jung, S.W. and Chang, M.H., 2014, Research of Real-Time 3D point Cloud Registration Algorithm using 2D image, 2014 Conference of Korean Society for Precision Engineering, pp.232-233.
  4. Kim, G., Lee, J., Park, S. and Ko, K., 2018, A Modified Method for Registration of 3D Point Clouds with a Low Overlap Ratio, J Korea Comput Graph Soc, 24(5):11-19. https://doi.org/10.15701/KCGS.2018.24.5.11
  5. Fouche G.J. and Malekian, R., 2018, Drone as an Autonomous Aerial Sensor System for Motion Panning, Measurement, 119:142-155. https://doi.org/10.1016/j.measurement.2018.01.027
  6. KIM, J., KIM, S., Choi, J. and Park, J., 2019, 3D Reconstruction of Traffic Accident Scene Using Drone & Pix4D, Transactions of the Korean Society of Automotive Engineers, 27(12):941-947. https://doi.org/10.7467/KSAE.2019.27.12.941
  7. Rhee, S., Hwang, Y. and Kim, S., 2018, A Study on Point Cloud Generation Method from UAV Image Using Incremental Bundle Adjustment and Stereo Image Matching Technique, Korean Journal of Remote Sensing, 2018, 34(6-1):941-951. https://doi.org/10.7780/KJRS.2018.34.6.1.8
  8. Deng, F., 2011, Registration between Multiple Laser Scanner Data Sets, Laser Scanning, Theory and Applications, pp. 449-472.
  9. Bendels G., Degener P., Wahl R., Koertgen M. and Klein R., 2004, Image-based Registration of 3D-Range Data Using Feature Surface Elements, In: Proceedings of The 5th International Symposium of Virtual Reality, Archaeology and Cultural Heritage, VAST 2004.
  10. Besl, P.J. and Mckay, N.D., 1992, AMethod For Reigstration of 3D Shapes, IEEE Trans. On PAMI, 14(2):239-256. https://doi.org/10.1109/34.121791
  11. Park, J., Kim, P., Cho, Y.K., and Kang, J., 2019, Framework for automated registration of UAV and UGV point clouds using local features in images, Autom. Constr., 98:175-182. https://doi.org/10.1016/j.autcon.2018.11.024
  12. Zhu, H., Guo, B., Zou, K., Li, Y., Yuen, K.V., Mihaylova, L. and Leung, H., 2019, A review of point set registration: From pairwise registration to groupwise registration, Sensors, 19:1-20. https://doi.org/10.1109/JSEN.2019.2925985