대한건축학회논문집:구조계 (Journal of the Architectural Institute of Korea Structure & Construction)

대한건축학회 (Architectural Institute of Korea)
권호 표지
DOI QR코드

DOI QR Code

하이브리드 프리스트레스트 프리캐스트 콘크리트 구조시스템의 부모멘트 영역 휨거동

Flexural Response of Negative Moment Region of Hybrid Prestressed Precast Concrete (HPPC) System

  • 최승호 (서울시립대학교 건축공학과) ;
  • 황진하 (서울시립대학교 건축공학과) ;
  • 허인욱 (서울시립대학교 건축공학과) ;
  • 김강수 (서울시립대학교 건축학부) ;
  • 우운택 ((주)동양구조안전기술 구조공학시스템연구소)
  • 투고 : 2018.06.18
  • 심사 : 2018.09.28
  • 발행 : 2018.10.30
⟨ 이전 논문 다음 논문 ⟩

초록

Hybrid Prestressed Precast Concrete System (HPPC system) is a newly developed frame system that can improve the performance of precast concrete (PC) joints by post-tensioning. In particular, the details proposed in this study can reduce the lifting weight of the PC members and eliminate problems caused by cracks in the joints that occur under service loads. This study performed an evaluation on the negative moment performance of full-scaled HPPC girders. The test specimens were cast with or without slabs, with bonded or unbonded tendons, and had different post-tensioned lengths in tensile section. The test results showed that the specimens with slabs had significantly higher stiffness and strength than those without slabs. There were no differences in the flexural behavior between those with bonded or unbonded tendons, and between those with short or long post-tensioned lengths in the negative moment region.

키워드

과제정보

연구 과제 주관 기관 : 국토교통과학기술진흥원

참고문헌

  1. Oh, J. Y., Lee, D. H., Cho, S. H., Kang, H., Cho, H. C., & Kim, K. S. (2015). Flexural Behavior of Prestressed Steel-concrete Composite Members with Discontinuous Webs, Advances in Materials Science and Engineering, Vol. 2015, Article ID: 278293, 1-13.
  2. Lee, D. H., Oh, J. Y., Kang, H., Kim, K. S., Kim, H. J., & Kim, H. Y. (2015). Structural Performance of Prestressed Composite Girders with Corrugated Steel Plate Webs, Journal of Constructional Steel Research, 104(1), 9-21. https://doi.org/10.1016/j.jcsr.2014.09.014
  3. Kim, K. S., Lee, D. H., Choi, S. M.., Choi, Y. H., & Jung, S.H. (2011). Flexural Behavior of Prestressed Composite Beams with Corrugated Web: Part I. Development and Analysis, Composites Part B: Engineering, 42(6), 1603-1616. https://doi.org/10.1016/j.compositesb.2011.04.020
  4. Kim, K. S., & Lee, D. H., Flexural Behavior of Prestressed Composite Beams with Corrugated Web: Part II. Experiment and Verification, Composites Part B: Engineering, 42(6), 1617-1629. https://doi.org/10.1016/j.compositesb.2011.04.019
  5. Hwang, J. H., Lee, D. H., Ju, H. J., Kim, K. S., Kang, T. H., & Pan, Z. (2016). Shear Deformation of Steel Fiber-Reinforced Prestressed Concrete Beams, International Journal of Concrete Structures and Materials, 10(3), S53-S63.
  6. Oh, B. H. (1992). Flexural analysis of reinforced concrete beams containing steel fibres, Journal of Structural Engineering, 118(10), 2821-2836. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:10(2821)
  7. Khuntia, M., Stojadinovic, B., & Goel, S.C., (1999). Shear strength of normal and high-strength fiber reinforced concrete beams without stirrups, Structural Journal, 96(2), 282-289.
  8. Lim, D., & Oh, B. (1999). Experimental and theoretical investigation on the shear of steel fibre reinforced concrete beams, Engineering Structures, 21(10), 937-944. https://doi.org/10.1016/S0141-0296(98)00049-2
  9. Yang, I. H., Joh, C., & Kim, B. S. (2010). Structural behavior of ultra high performance concrete beams subjected to bending, Engineering Structures, 32(11), 3478-3487. https://doi.org/10.1016/j.engstruct.2010.07.017
  10. Yang, I. H., Joh, C., & Kim, B. S. (2011). Flexural strength of large-scale ultra high performance concrete prestressed T-beams, Canadian Journal of Civil Engineering, 38(11), 1185-1195. https://doi.org/10.1139/l11-078
  11. Yoo, S. W., & Choo, J. F. (2016). Evaluation of the flexural behavior of composite beam with inverted-T steel girder and steel fiber reinforced ultra high performance concrete slab, Engineering Structures, 118, 1-15.