참고문헌
- Standard A. F2792, Standard Terminology for Additive Manufacturing Technologies. West.
- Choi, J.W., and Kim, H.-C., "3D Printing Technologies - A Review", The Korean Society of Manufacturing Process Engineers, Vol. 14, No. 3, 2015, pp. 1-8.
- Wang, X., Jiang, M., Zhou, Z., et al., "3D Printing of Polymer Matrix Composites: A Review and Prospective", Composites Part B: Engineering, Vol. 110, 2017, pp. 442-458. https://doi.org/10.1016/j.compositesb.2016.11.034
- Ge, Q., Dunn, C.K., Qi, H.J., et al., "Active Origami by 4D Printing", Smart Materials and Structures, Vol. 23, No. 9, 2014, pp. 094007. https://doi.org/10.1088/0964-1726/23/9/094007
- Cooperstein, I., Layani, M., and Magdassi, S., "3D Printing of Porous Structures by UV-curable O/W Emulsion for Fabrication of Conductive Objects," Journal of Materials Chemistry C, Vol. 3, No. 9, 2015, pp. 2040-2044. https://doi.org/10.1039/C4TC02215G
- Postiglione, G., Natale, G., Griffini, G., et al., "Conductive 3D Microstructures by Direct 3D Printing of Polymer/carbon Nanotube Nanocomposites via Liquid Deposition Modeling", Composites Part A: Applied Science and Manufacturing, Vol. 76, 2015, pp. 110-114.
- Saari, M., Cox, B., Richer, E., et al., "Fiber Encapsulation Additive Manufacturing: An Enabling Technology for 3D Printing of Electromechanical Devices and Robotic Components," 3D Printing and Additive Manufacturing, Vol. 2, No. 1, 2015, pp. 32-39. https://doi.org/10.1089/3dp.2015.0003
- Vert, M., Doi, Y., Hellwich, K.-H, et al., "Terminology for Biorelated Polymers and Applications (IUPAC Recommendations 2012)", Pure and Applied Chemistry, Vol. 84, No. 2, 2012, pp. 377-410. https://doi.org/10.1351/PAC-REC-10-12-04
- Chung, H., and Das, S., "Processing and Properties of Glass Bead Particulate-filled Functionally Graded Nylon-11 Composites Produced by Selective Laser Sintering", Materials Science and Engineering: A, Vol. 437, No. 2, 2006, pp. 226-234. https://doi.org/10.1016/j.msea.2006.07.112
- Nikzad, M., Masood, S., and Sbarski, I., "Thermo-mechanical Properties of a Highly Filled Polymeric Composites for Fused Deposition Modeling," Materials & Design, Vol. 32, No. 6, 2011, pp. 3448-3456. https://doi.org/10.1016/j.matdes.2011.01.056
-
Boparai, K., Singh, R., and Singh, H., "Comparison of Tribological Behaviour for Nylon6-Al-
$Al_2O_3$ and ABS Parts Fabricated by Fused Deposition Modelling: This Paper Reports a Low Cost Composite Material that is More Wear-resistant than Conventional ABS," Virtual and Physical Prototyping, Vol. 10, No. 2, 2015, pp. 59-66. https://doi.org/10.1080/17452759.2015.1037402 - Ahn, S.-H, Montero, M., Odell, D., et al., "Anisotropic Material Properties of Fused Deposition Modeling ABS," Rapid Prototyping Journal, Vol. 8, No. 4, 2002, pp. 248-257. https://doi.org/10.1108/13552540210441166
- Torrado, A.R., Shemelya, C.M., English, J.D., et al., "Characterizing the Effect of Additives to ABS on the Mechanical Property Anisotropy of Specimens Fabricated by Material Extrusion 3D Printing", Additive Manufacturing, Vol. 6, 2015, 16-29. https://doi.org/10.1016/j.addma.2015.02.001
- Kokkinis, D., Schaffner, M., Studart, A.R., "Multimaterial Magnetically Assisted 3D Printing of Composite Materials", Nature communications, Vol. 6, 2015, pp. 8643.
- Isakov, D., Lei, Q., Castles, F., et al., "3D Printed Anisotropic Dielectric Composite with Meta-material Features," Materials & Design, Vol. 93, 2016, pp. 423-430. https://doi.org/10.1016/j.matdes.2015.12.176
- Kurimoto, M., Yamashita, Y., Ozaki, H., et al., editors., "3D Printing of Conical Insulating Spacer Using Alumina/UVcured-resin Composite", Electrical Insulation and Dielectric Phenomena (CEIDP), 2015 IEEE Conference on, 2015, IEEE.
- Shemelya, C.M., Rivera, A,, Perez, A.T., et al., "Mechanical, Electromagnetic, and X-ray Shielding Characterization of a 3D Printable Tungsten-polycarbonate Polymer Matrix Composite for Space-based Applications," Journal of Electronic Materials, Vol. 44, No. 8, 2015, pp. 2598-2607. https://doi.org/10.1007/s11664-015-3687-7
-
Castles, F., Isakov, D., Lui, A., et al., "Microwave Dielectric Characterisation of 3D-printed
$BaTiO_3$ /ABS Polymer Composites. Scientific Reports", Vol. 6, 2016, pp. 22714. https://doi.org/10.1038/srep22714 - Hwang, S., Reyes, E.I., Moon, K.-S., et al., "Thermo-mechanical Characterization of Metal/polymer Composite Filaments and Printing Parameter Study for Fused Deposition Modeling in the 3D Printing Process," Journal of Electronic Materials, Vol. 44, No. 3, 2015, pp. 771-777. https://doi.org/10.1007/s11664-014-3425-6
- Kalsoom, U., Peristyy, A., Nesterenko, P., et al., "A 3D Printable Diamond Polymer Composite: A Novel Material for Fabrication of Low Cost Thermally Conducting Devices," RSC Advances, Vol. 6, No. 44, 2016, pp. 38140-38147. https://doi.org/10.1039/C6RA05261D
- Zubrowska, A., Masirek, R., Piorkowska, E., et al., "Structure, Thermal and Mechanical Properties of Polypropylene Composites with Nano-and Micro-diamonds," Polimery, Vol. 60, No. 5, 2015, pp. 331-336. https://doi.org/10.14314/polimery.2015.331
- Lee, D.W., Kim, C.U., Byun, J.H. et al., "Optimization of Fiber Ratio in Laminated Composites for Development of Threedimensional Preform T-beam Structure," Composites Research, Vol. 30, No. 5, 2017, pp. 297-302. https://doi.org/10.7234/COMPOSRES.2017.30.5.297
- Uhlmann, E., Sammler, F., Richarz, S., et al., "Machining of Carbon Fibre Reinforced Plastics," Procedia CIRP Vol. 24, 2014, pp. 19-24. https://doi.org/10.1016/j.procir.2014.07.135
- Fu, S.-Y., and Lauke, B., "Effects of Fiber Length and Fiber Orientation Distributions on the Tensile Strength of Short-fiberreinforced Polymers," Composites Science and Technology, Vol. 56, No. 10, 1996, pp. 1179-1190. https://doi.org/10.1016/S0266-3538(96)00072-3
- Tekinalp, H.L., Kunc, V., Velez-Garcia, G.M., et al., "Highly Oriented Carbon Fiber-polymer Composites via Additive Manufacturing," Composites Science and Technology, Vol. 105, 2014, pp. 144-150. https://doi.org/10.1016/j.compscitech.2014.10.009
- Ning, F., Cong, W., Hu, Y., et al., "Additive Manufacturing of Carbon Fiber-reinforced Plastic Composites Using Fused Deposition Modeling: Effects of Process Parameters on Tensile Properties," Journal of Composite Materials, Vol. 51, No. 4, 2017, pp. 451-462. https://doi.org/10.1177/0021998316646169
- Tian, X., Liu, T., Yang, C., et al., "Interface and Performance of 3D Printed Continuous Carbon Fiber Reinforced PLA Composites," Composites Part A: Applied Science and Manufacturing, Vol. 88, 2016, pp. 198-205. https://doi.org/10.1016/j.compositesa.2016.05.032
- Chen, Q., Boisse, P., Park, C.H., et al., "Intra/inter-ply Shear Behaviors of Continuous Fiber Reinforced Thermoplastic Composites in Thermoforming Processes," Composite Structures, Vol. 93, No. 7, 2011, pp. 1692-1703. https://doi.org/10.1016/j.compstruct.2011.01.002
- Sun, K., Wei, T.S., Ahn, B.Y., et al., "3D Printing of Interdigitated Li‐Ion Microbattery Architectures," Advanced Materials, Vol. 25, No, Vol. 33, 2013, pp. 4539-4543. https://doi.org/10.1002/adma.201301036
- Love, L.J., Kunc, V., Rios, O., et al., "The Importance of Carbon Fiber to Polymer Additive Manufacturing," Journal of Materials Research, Vol. 29, No. 17, 2014, pp. 1893-1898. https://doi.org/10.1557/jmr.2014.212
- Namiki, M., Ueda, M., Todoroki, A., Hirano, Y., and Matsuzaki, R., "3D Printing of Continuous Fiber Reinforced Plastic," Proc Soc Adv Mater Process Eng 2014.
- Matsuzaki, R., Ueda, M., Namiki, M., et al., "Three-dimensional Printing of Continuous-fiber Composites by In-nozzle Impregnation," Scientific Reports, Vol. 6, 2016, pp. 23058.
- Van Der Klift, F., Koga, Y., Todoroki, A., et al., "3D Printing of Continuous Carbon Fibre Reinforced Thermo-plastic (CFRTP) Tensile Test Specimens," Open Journal of Composite Materials, Vol. 6, No. 1, 2015, pp. 18. https://doi.org/10.4236/ojcm.2016.61003
- Lu, H., Liang, F., Yao, Y., et al., "Self-assembled Multi-layered Carbon Nanofiber Nanopaper for Significantly Improving Electrical Actuation of Shape Memory Polymer Nanocomposite," Composites Part B: Engineering, Vol. 59, 2014, pp. 191-195. https://doi.org/10.1016/j.compositesb.2013.12.009
- Lu, H., Huang, W.M., and Leng, J., "Functionally Graded and Self-assembled Carbon Nanofiber and Boron Nitride in Nanopaper for Electrical Actuation of Shape Memory Nanocomposites," Composites Part B: Engineering, Vol. 62, 2014, pp. 1-4.
- Lu, H., Yao, Y., Huang, W.M., Leng, J., and Hui, D., "Significantly Improving Infrared Lightinduced Shape Recovery Behavior of Shape Memory Polymeric Nanocomposite via a Synergistic Effect of Carbon Nanotube and Boron Nitride," Compos Part B Eng., Vol. 62, 2014, 256e61. https://doi.org/10.1016/j.compositesb.2014.03.007
- Ge, Q., Qi, H.J., and Dunn, M.L., "Active Materials by Fourdimension Printing," Applied Physics Letters, Vol. 103, No. 13, 2013, 131901. https://doi.org/10.1063/1.4819837
- Gladman, A.S., Matsumoto, E.A., Nuzzo, R.G., et al., "Biomimetic 4D Printing," Nature Materials, Vol. 15, No. 4, 2016, pp. 413. https://doi.org/10.1038/nmat4544
- Zhong, W., Li, F., Zhang, Z., et al., "Short Fiber Reinforced Composites for Fused Deposition Modeling," Materials Science and Engineering: A, Vol. 301, No. 2, 2001, pp. 125-130. https://doi.org/10.1016/S0921-5093(00)01810-4
- Compton, B.G., and Lewis, J.A., "3D‐printing of Lightweight Cellular Composites," Advanced Materials, Vol. 26, No. 34, 2014, pp. 5930-5935. https://doi.org/10.1002/adma.201401804
- Yan, X., Gu, J., Zheng, G., et al., "Lowly Loaded Carbon Nanotubes Induced High Electrical Conductivity and Giant Magnetoresistance in Ethylene/1-octene Copolymers," Polymer, Vol. 103, 2016, pp. 315-327. https://doi.org/10.1016/j.polymer.2016.09.056
- Gu, J., Xie, C., Li, H., et al., "Thermal Percolation Behavior of Graphene Nanoplatelets/polyphenylene Sulfide Thermal Conductivity Composites," Polymer Composites, Vol. 35, No. 6, 2014, pp. 1087-1092. https://doi.org/10.1002/pc.22756
- Gu, J., Liang, C., Dang, J., et al., "Ideal Dielectric Thermally Conductive Bismaleimide Nanocomposites Filled with Polyhedral Oligomeric Silsesquioxane Functionalized Nanosized Boron Nitride," RSC Advances, Vol. 6, No. 42, 2016, pp. 35809-35814. https://doi.org/10.1039/C6RA04513H
- Fei Liang, J.S., Wang Xin, Xu Yunjun, et al., "Polyurethane Nanocomposites Coatings with Enhanced Mechanical and Thermal Properties," Orlando, FL: CAMX, 2014.
- Zhan, H., Cheng, F., Chen, Y., et al., "Transfer Printing for Preparing Nanostructured PDMS Film as Flexible SERS Active Substrate", Composites Part B: Engineering, Vol. 84, 2016, pp. 222-227. https://doi.org/10.1016/j.compositesb.2015.08.080
- Yoo, M.H., J. H. S., Lee, M.G., et al., "Development of CNTPolymer Composite Filament for 3D Printer", Korean Society of Manufacturing Technology Engineers, 2016, 1.
- Lin, D., Jin, S., Zhang, F., et al., "3D Stereolithography Printing of Graphene Oxide Reinforced Complex Architectures," Nanotechnology, Vol. 26, No. 43, 2015, pp. 434003. https://doi.org/10.1088/0957-4484/26/43/434003
- Guo, S.-Z., Yang, X., Heuzey, M.-C., et al., "3D Printing of a Multifunctional Nanocomposite Helical Liquid Sensor," Nanoscale, Vol. 7, No. 15, 2015, pp. 6451-6456. https://doi.org/10.1039/C5NR00278H
- Wei, X., Li, D., Jiang, W., et al., "3D Printable Graphene Composite," Scientific Reports, Vol. 5, 2015, pp. 11181.
- Dul, S., Fambri, L., and Pegoretti, A., "Fused Deposition Modelling with ABS-graphene Nanocomposites," Composites Part A: Applied Science and Manufacturing, Vol. 85, 2016, pp. 181-191. https://doi.org/10.1016/j.compositesa.2016.03.013
- Weng, Z., Wang, J., Senthil, T., et al., "Mechanical and Thermal Properties of ABS/montmorillonite Nanocomposites for Fused Deposition Modeling 3D Printing," Materials & Design, Vol. 102, 2016, pp. 276-283. https://doi.org/10.1016/j.matdes.2016.04.045
-
Yugang, D., Yuan, Z., Yiping, T., et al., "Nano-
$TiO_2$ -modified Photosensitive Resin for RP," Rapid Prototyping Journal, Vol. 17, No. 4, 2011, pp. 247-252. https://doi.org/10.1108/13552541111138360 - He, M., Zhao, Y., Wang, B., et al., "3D Printing Fabrication of Amorphous Thermoelectric Materials with Ultralow Thermal Conductivity", Small, Vol. 11, No. 44, 2015, pp. 5889-5894. https://doi.org/10.1002/smll.201502153
- Sandoval, J., Soto, K., Murr, L., et al., "Nanotailoring Photocrosslinkable Epoxy Resins with Multi-walled Carbon Nanotubes for Stereolithography Layered Manufacturing," Journal of Materials Science, Vol. 42, No. 1, 2007, pp. 156-165. https://doi.org/10.1007/s10853-006-1035-2
- Hector Sandoval, J., and Wicker, R.B., "Functionalizing Stereolithography Resins: Effects of Dispersed Multi-walled Carbon Nanotubes on Physical Properties," Rapid Prototyping Journal, Vol. 12, No. 5, 2006, pp. 292-303. https://doi.org/10.1108/13552540610707059
- Zhang, Y., Li, H., Yang, X., et al., "Additive Manufacturing of Carbon Nanotube‐photopolymer Composite Radar Absorbing Materials," Polymer Composites, Vol. 39, No. S2, 2018, pp. E671-E676. https://doi.org/10.1002/pc.24117
- Kim, K., Zhu, W., Qu, X., et al., "3D Optical Printing of Piezoelectric Nanoparticle-polymer Composite Materials," ACS Nano, Vol. 8, No. 10, 2014, pp. 9799-9806. https://doi.org/10.1021/nn503268f
- Gonzalez, G., Chiappone, A., Roppolo, I., et al., "Development of 3D Printable Formulations Containing CNT with Enhanced Electrical Properties," Polymer, Vol. 109, 2017, pp. 246-253. https://doi.org/10.1016/j.polymer.2016.12.051
- Li, Z., Wang, Z., Gan, X., et al., "Selective Laser Sintering 3D Printing: A Way to Construct 3d Electrically Conductive Segregated Network in Polymer Matrix," Macromolecular Materials and Engineering, Vol. 302, No. 11, 2017, pp. 1700211. https://doi.org/10.1002/mame.201700211
- Athreya, S.R., Kalaitzidou, K., Das, S., "Processing and Characterization of a Carbon Black-filled Electrically Conductive Nylon-12 Nanocomposite Produced by Selective Laser Sintering," Materials Science and Engineering: A, Vol. 527, No. 10-11, 2010, pp. 2637-2642. https://doi.org/10.1016/j.msea.2009.12.028
- Kim, H.C., Hahn, H.T., and Yang, Y.S., "Synthesis of PA12/functionalized GNP Nanocomposite Powders for the Selective Laser Sintering Process," Journal of Composite Materials, Vol. 47, No. 4, 2013, pp. 501-509. https://doi.org/10.1177/0021998312441812
- Shofner, M., Lozano, K., Rodriguez‐Macias, F., et al., "Nanofiber-reinforced Polymers Prepared by Fused Deposition Modeling," Journal of Applied Polymer Science, Vol. 89, No. 11, 2003, pp. 3081-3090. https://doi.org/10.1002/app.12496
- Tsiakatouras, G., Tsellou, E., and Stergiou, C., "Comparative Study on Nanotubes Reinforced with Carbon Filaments for the 3D Printing of Mechanical Parts," World Transactions on Engineering and Technology Education, Vol. 12, No. 3, 2014, pp. 392-396.
- Gnanasekaran, K., Heijmans, T., van Bennekom, S., et al., "3D printing of CNT-and Graphene-based Conductive Polymer Nanocomposites by Fused Deposition Modeling," Applied Materials Today, Vol. 9, 2017, pp. 21-28. https://doi.org/10.1016/j.apmt.2017.04.003
- Rymansaib, Z., Iravani, P., Emslie, E., et al., "All‐Polystyrene 3D‐Printed Electrochemical Device with Embedded Carbon Nanofiber‐Graphite‐Polystyrene Composite Conductor," Electroanalysis, Vol. 28, No. 7, pp. 1517-1523. https://doi.org/10.1002/elan.201600017
- Park, S.H., "3D Printing Industry Trend Analysis and R&D Policy Research," Korea Institute of Science and Technology Information, Vol. 24, No. 3/4, 2014, pp. 93-104.
- Wohelers Report 2017, [online] Available at, http, //www.cadalyst.com/hardware/3d-printers/wohlers-report-finds-sloweroverall-growth-more-competition-3d-printing-space-3Statista2018.
- [online] Available at: https://www.statista.com/statistics/739182/worldwide-survey-3d-printing-applications