한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

  • 제17권4호
  • /
  • Pages.104-112
  • /
  • 2018
  • /
  • 1598-6721(pISSN)
  • /
  • 2288-0771(eISSN)
한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지
DOI QR코드

DOI QR Code

SimulationX®를 이용한 가변 사판식 액셜 피스톤 펌프의 밸브플레이트 노치 최적화에 관한 연구

SimulationX®-based Modeling for Valve-Plate Notch Design of Variable Swash-Plate Axial Piston Pump

  • 이산성 (국립 창원대학교 기계설계공학과) ;
  • 정원지 (국립 창원대학교 기계설계공학과) ;
  • 임동재 (국립 창원대학교 기계설계공학과) ;
  • 차태형 (국립 창원대학교 기계설계공학과) ;
  • 김수태 (국립 창원대학교 기계공학과) ;
  • 이정실 (세계유압) ;
  • 최경신 (로이드선급)
  • 투고 : 2018.06.04
  • 심사 : 2018.06.15
  • 발행 : 2018.08.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Considering the shape of a valve plate in design is important for reducing the pulsation phenomenon, which is a negative factor in pump performance. The purpose of this study is to propose an optimized method for a valve-plate V-type notch of a piston pump by modeling and simulation. The method uses $SimulationX^{(R)}$, a commercial hydraulic analysis program, and to provide data for the designing of the notch. The opening areas are determined by performing kinematic analysis of the notch part where the opening area changes rapidly. After applying the result analysis, the main effects on maximum pressure pulsation and maximum backflow according to the notch design factors are analyzed by using the full factorial method of experimental design. The optimized solutions are derived for the notch design variables, based on the analyzed data.

키워드

참고문헌

  1. Park, J. H., "The Study on Development of Fixed Displacement Piston Pump for Special Access Vehicle," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 9, No. 3, pp. 19-27, 2010.
  2. Edge, k. Daling, J., "A Theoretical Model of Axial Piston Pump Flow Ripple," 1th Bath Int. Fluid Power Workshop, pp. 113-136, 1988.
  3. Cho, I. S., "Characteristics of Lubrication between Slipper and Swash plate in Swash plate Type Hydraulic Piston Pump," Journal of the KSTLE, Vol. 29, No. 3, pp. 186-191, 2013.
  4. Kim, J. G., "Performance Characteristics with Valve Plate Shapes in Swash Plate Type Oil Piston Pumps," A Thesis for a Doctorate, Chonbuk National University, Republic of Korea. 2003.
  5. Kim, B. S., "A Study on Open-area Planning of Main Control Valve for Excavators,"A Master's Thesis, Ulsan National University, Republic of Korea. 2007.
  6. Jang, J. H., Chung, W. J., "Application of Simulation X Based Simulation Technique to Notch Shape Optimization for a Variable Swash Plate Type Piston Pump," Proceedings of the International Conference on Scientific Computing, pp. 137-142, 2013.
  7. Jeong, Y. S., Chung, W. J., "A Study on the Characteristic of Remote Control Valve Using SimulationX," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 5, pp. 78-84, 2017. https://doi.org/10.14775/ksmpe.2017.16.5.078

피인용 문헌

  1. Development of Hydraulic Compressor for Hydrogen Station vol.17, pp.6, 2018, https://doi.org/10.14775/ksmpe.2018.17.6.158