한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

  • 제17권4호
  • /
  • Pages.17-22
  • /
  • 2018
  • /
  • 1598-6721(pISSN)
  • /
  • 2288-0771(eISSN)
한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지
DOI QR코드

DOI QR Code

회색 관계 분석법을 이용한 누수 방지용 밸브 시트 설계

Valve Seat Design for Full Contact Effect Using Grey Relational Analysis

  • 이정희 (부경대학교 기계공학과) ;
  • 강경아 (부경대학교 기계공학과) ;
  • 곽재섭 (부경대학교 기계공학과)
  • Lee, Jung-Hee (Department of Mechanical Engineering, Pukyong UNIV.) ;
  • Kang, Gyeong-Ah (Department of Mechanical Engineering, Pukyong UNIV.) ;
  • Kwak, Jae-Seob (Department of Mechanical Engineering, Pukyong UNIV.)
  • 투고 : 2018.06.14
  • 심사 : 2018.06.25
  • 발행 : 2018.08.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

A glove valve regulates the flow in a pipeline as a kind of control valve. However, when the disc and seat contact, the valve structure can be distorted and flow can leak due to the elongation of the valve material under high pressure. The surface texture is not good enough to seal the contact surface (in practice) because the lapping process is usually done manually. Furthermore, assembly performance is analyzed by structural analysis. Compared with a standard seat, the newly designed seat had a smaller radial deformation and a larger longitudinal deformation. Therefore, the newly designed seat can maintain a tight and uniform contact with the disc with a reduced radial deformation and an expanded available seal area with an increased longitudinal deformation. The seal performance of the glove valve has been improved in a cost-effective manner.

키워드

참고문헌

  1. Jazi, A. M. and Rahimzadeh, H., "Waveform Analysis of Cavitation in a Globe Valve", Ultrasonics, Vol. 49, No. 6-7, pp. 577-582, 2009. https://doi.org/10.1016/j.ultras.2009.02.004
  2. Choi, I. K. and Kang, J. H., "Study of Performance Properties and Steam Condensate Capacity by Orifice Diameters of Free Float Steam Trap Valve", Journal of the Korean Society of Manufacturing Process Engineering. Vol. 15, No. 2, pp. 31-37, 2016.
  3. Kim, J. H., Shin. M. J. and Kim, M. K., "A Study on Structural Improvement of the Swashplate Axial Piston Pump Valve Block (1)", Journal of the Korean Society of Manufacturing Process Engineering, Vol. 17, No. 1, pp. 69-75, 2018.
  4. Caydas, U. M. and Hascalik, A., "Use of Grey Relational Analysis to Determine Optimum Laser Cutting Parameters with Multi-Performance Characteristics", Optics & Laser Technology, Vol. 40, No. 7, pp. 987-994, 2008. https://doi.org/10.1016/j.optlastec.2008.01.004
  5. Sreenivasulu, R., and Rao, C. S., "Application of Grey Relational Analysis for Surface Roughness and Roundness Error in Drilling of AL 6061 Alloy", International Journal of Lean Thinking, Vol. 3, No. 2, pp. 67-78, 2012.